···
Log in / Register

How to Adjust the Rearview Mirror on the Bin Yue?

4 Answers
OHeidi
09/06/25 5:52am

Here are the steps to adjust the rearview mirror on the Bin Yue: 1. Locate the control adjustment button on the left side of the driver's seat; 2. The middle 0 position on the adjustment knob turns off the adjustment function; 3. Rotate the knob to 'r' to adjust the angle of the right rearview mirror; 4. Rotate the knob to 'l' to adjust the angle of the left rearview mirror. Additional information: 1. Taking the 2020 Bin Yue as an example, its front suspension is a MacPherson independent suspension, and the rear suspension is a torsion beam non-independent suspension. 2. It is equipped with a 1.4L inline 4-cylinder turbocharged engine, with a maximum horsepower of 141ps, a maximum power of 104kw, a maximum torque of 235nm, and is paired with a 6-speed manual transmission.

Was this review help?
17
5
Share
StTucker
09/18/25 5:39am

When I first got the Bin Yue, I also spent quite some time figuring out the rearview mirror adjustment. There's a round knob near the window on the driver's side door panel, marked with L and R. First, turn it to L to adjust the left mirror, then push the small joystick in the middle up, down, left, or right, and you'll see the mirror move accordingly. After adjusting the left side, turn it to R to adjust the right side. Remember to sit upright while adjusting, don't lean to one side. Adjust the mirrors so that you can see a bit of your car's door handle and the distant horizon is roughly in the middle. If the mirrors fog up after rain, just turn the knob to the heating symbol, and it will defog automatically very quickly. The top trim of this car also has an automatic tilting function when reversing; when you shift to R gear, the right mirror will automatically tilt down to show the ground.

Was this review help?
2
0
Share
Expand All
CourtneyDella
11/01/25 6:04am

Attention all Bin Yue owners, the rearview mirror adjustment button is located on the left door armrest. Find the round controller with directional arrows, turn the knob to the L position to adjust the left mirror, then use the four-way button to move the mirror angle. The right mirror is adjusted similarly by turning to the R position. It's recommended to adjust during daytime with good lighting for more accurate visibility. By the way, the rearview mirror heating is linked with the rear window defogger. In winter, pressing the defogger button will help remove moisture from the mirrors. Try to adjust the mirror position to see two lanes behind you, reducing blind spots for safer driving.

Was this review help?
8
0
Share
Expand All
DelAshlyn
12/15/25 6:12am

The 2023 BinYue has relocated its mirror adjustment controls to a square panel below the left side of the steering wheel. Use the left/right toggle buttons to select which mirror to adjust - an illuminated indicator shows the currently selected side. Once selected, fine-tune the angle using the four directional arrows. The folding button sits at the edge of the panel - press it to automatically retract the mirrors, especially useful when passing through narrow sections. If forgotten, the mirrors will automatically fold when locking the car. The interior rearview mirror requires manual anti-glare adjustment - simply push the small tab at the bottom when vehicles behind use high beams at night to eliminate glare.

Was this review help?
15
5
Share
Expand All
More Forum Discussions

How are the 1 to 6 cylinders arranged in the Teana V6 engine?

When standing at the front end of the hood, the left side consists of cylinders 1, 3, and 5, while the right side has cylinders 2, 4, and 6. The Teana V6's six cylinders are divided into two rows, with three cylinders in each row, and a certain angle between the two rows of cylinders, typically around 60° or 90°. Additional Information: Basic Introduction to the Teana: The Teana is a flagship mid-to-high-end luxury sedan under the NISSAN brand. With cutting-edge technology, the Teana perfectly combines Driving Technology (Precision Driving Engineering) and Comfort Technology (Absolute Comfort Engineering), bringing the design concept of mid-size sedans to a new level.
19
4
Share

Can the Audi A6 charge a phone?

Audi A6 has a USB port, which can be used to charge a phone. Audi A6 dimensions: The Audi A6 is a mid-to-large-sized car under the Audi brand. The length, width, and height of this car are 4951 millimeters (mm), 1886 millimeters (mm), and 1483 millimeters (mm) respectively, with a wheelbase of 2925 millimeters (mm). Engine: The 3.0-liter turbocharged engine has 340 horsepower and a maximum torque of 500 Newton meters. The maximum power speed of this engine is 5000 to 6400 revolutions per minute, and the maximum torque speed is 1370 to 4500 revolutions per minute. This engine is equipped with a 48V mild hybrid system and direct fuel injection technology, and it uses an aluminum alloy cylinder head and block.
3
5
Share

What is the reason for the loud noise when a BMW is just started?

BMW starts with a loud noise because the engine is cold when it is just started. Caused by engine carbon deposits: As the old engine oil becomes thinner with use, carbon deposits accumulate more and more. Thinner engine oil is prone to leakage, leading to increasing carbon deposits and a significant loss of power. When new engine oil is replaced, the engine may not adapt to the viscosity of the oil, which can cause the engine to rev higher, resulting in louder engine noise. Solution: Regularly taking the car to a 4S shop for necessary cleaning of the intake system is the most effective way to reduce carbon deposit formation. It is recommended to perform necessary cleaning of the car's intake system at around 30,000 kilometers.
9
2
Share

Why does water always leak into the old Lavida when it rains?

The reason water always leaks into the old Lavida when it rains is due to poor sealing of the glass and door seals. Below are specific details about the Lavida: 1. Vehicle Positioning: The Lavida is positioned as a compact sedan, with body dimensions of 4605/1765/1460mm and a wheelbase of 2610mm. 2. Powertrain: The Lavida offers two engine options: a 1.6L naturally aspirated engine and a 1.4TSI engine. In terms of the transmission system, the 1.4T engine is paired with a 5-speed manual transmission and a 7-speed dual-clutch transmission, while the 1.6L model comes with a combination of a 5-speed manual and a 6-speed automatic manual transmission.
1
5
Share

How to Check Reference Points for Reverse Parking?

Here are the methods for checking reference points during reverse parking: 1. Method One: Ensure the car body is parallel and close to the outer edge line of the parking space, maintaining a distance between 1.5m to 2m. At this point, your shoulder should align with the horizontal edge line. 2. Method Two: When turning the steering wheel, do it quickly and accurately (fast and precise), as preparing the direction in advance helps you locate the correct point, laying the foundation for successful parking. 3. Method Three: While reversing, when the frame at the lower edge of the left rearview mirror aligns with the horizontal white line, quickly and accurately turn the steering wheel to the full lock. Control the speed and focus on the right rearview mirror. When the distance between the parking corner and the car body in the mirror is three centimeters, turn the steering wheel back to straighten the direction.
18
2
Share

Should Older Magotan Models Use 92 or 95 Octane Gasoline?

Older Magotan models should use 95 octane gasoline. Detailed reasons why older Magotan models require 95 octane gasoline: The Volkswagen Magotan's direct-injection engine has higher fuel requirements, so using lower-grade 92 octane gasoline should be avoided to prevent premature engine carbon buildup and knocking. The Volkswagen Magotan has continuously evolved internally and externally to meet current automotive needs, making significant changes in areas like vehicle connectivity, practical configurations, and new energy requirements. Differences between 92 and 95 octane gasoline: The difference between 92 and 95 octane gasoline lies not in quality but in their iso-octane content, which affects their anti-knock properties. 95 octane gasoline contains higher iso-octane levels, making it slightly more expensive but providing better anti-knock performance. Different anti-knock properties suit engines with varying compression ratios: high-compression engines require 95 octane gasoline, while low-compression engines can use 92 octane.
5
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.