How to Adjust the Rearview Mirror on the Bin Yue?

2 Answers
DiJonathan
07/28/25 6:01pm
When the ignition switch is in the "ON" position, move the "Left/Right Mirror Selection" switch to the left or right side, and use the "Mirror Adjustment" switch to adjust the mirror. Below are the types of rearview mirrors explained: 1. Interior Rearview Mirror: The interior rearview mirror allows the driver to confirm the rear view without significantly changing the forward line of sight while driving. 2. Exterior Rearview Mirror: Passenger vehicles typically mount the exterior rearview mirrors on the doors. 3. Undercarriage Mirror: The undercarriage mirror enables the driver to see areas beyond the front and rear wheels under the car body through the mirror directly in front of the driver's seat. It helps the driver check for people or obstacles near the wheels and the side of the car when reversing or starting forward, preventing injuries, damage to objects, or vehicle harm, providing convenience and safety for the driver.
Was this review help?
1
0
Share
GabrielFitz
08/11/25 11:55pm
Adjusting the rearview mirrors on the Bin Yue is actually quite simple. Having driven this car for several years, I always check the mirror positions before setting off. After sitting in the driver's seat, locate the small control panel on the door armrest. There's a toggle button marked L and R—press it to select the left or right mirror, then use the directional keys to adjust the mirror angle up, down, left, or right. Remember to position it so you can clearly see the edges of the lane behind you without reflecting too much of the car's interior, as this enhances driving safety. It's best to adjust while parked, on level ground, with the windows closed, and take your time fine-tuning—too wide a view can be distracting, while too narrow leaves blind spots. The Bin Yue's mirrors also feature an anti-glare function, which is great for nighttime driving. If the mirror surface gets blurry, wipe it gently with a soft cloth to avoid scratches. Regularly check that the buttons operate smoothly without sticking—don't skip this step, as it can be a lifesaver in critical moments. In short, experiment a few times to find your ideal position, and once you're used to it, everything will feel natural.
Was this review help?
1
5
Share
Expand All
More Forum Discussions

Is It Safer to Wear a Helmet While Driving a Car?

It is prohibited to drive a motor vehicle with incomplete safety facilities or mechanical components that do not meet technical standards, which may pose safety hazards. Below are some driving precautions: 1. Do not occupy the emergency lane casually: During traffic jams on highways, the emergency lane becomes crucial as it serves as a rescue lane and the only passage for emergency vehicles. Therefore, avoid occupying the emergency lane for temporary convenience. If you must stop due to special circumstances, promptly turn on the hazard lights and place a triangular warning sign 50 meters behind the vehicle. 2. Make slight adjustments to the steering wheel: When driving on highways, avoid making large turns with the steering wheel. Always keep a firm grip on the wheel, and only make minor adjustments when avoiding obstacles. 3. Do not occupy the overtaking lane for extended periods: The overtaking lane is typically the left lane. New cars on highways often do not reach high speeds quickly, so it is best to drive in the normal lane and avoid staying in the overtaking lane for too long.
18
2
Share

What Causes Steering Wheel Noise During the Break-in Period of a New Car?

Steering wheel noise during the break-in period of a new car is caused by friction between the components of the steering wheel and is considered normal. Here are some precautions to take during the break-in period: 1. Avoid emergency braking: Emergency braking not only shocks the braking system during the break-in period but also increases the impact load on the chassis and engine. It is best to avoid emergency braking within the first 300 kilometers of driving. 2. Avoid overloading: Running a new car at full capacity during the break-in period can damage the mechanical components. Therefore, within the first 1,000 kilometers of driving, the load should generally not exceed 75%-80% of the rated capacity. 3. Highway driving: Driving long distances during the break-in period increases the continuous working time of the engine, which can lead to mechanical wear. It is recommended to maintain a speed of 120 km/h with the engine RPM not exceeding 3,000. If the RPM exceeds 3,000, consider reducing the speed to keep the RPM at 3,000. During long-distance driving, take breaks at service areas for about ten minutes.
6
3
Share

How to Lift Up Car Windshield Wipers?

To lift up car windshield wipers, follow these steps: 1. Turn off the car engine; 2. Within 10 seconds, activate the windshield washer switch by pulling the wiper lever toward the driver; 3. After pressing the windshield washer switch, the wipers will automatically move to the center position of the windshield; 4. Manually lift the wipers upright. To reset them, simply reverse the steps. If the wipers remain attached to the glass for a long time, it can accelerate the aging of the rubber and cause deformation. Windshield wipers, also known as wiper blades or windscreen wipers, are devices used to wipe away raindrops and dust from the vehicle's windshield, improving driver visibility and enhancing road safety.
5
0
Share

What is the Normal Decibel Level for Interior Car Noise?

Interior car noise below 60 decibels is considered normal, with 40 to 60 decibels representing typical conversation levels. According to regulations, the noise level inside passenger vehicles should not exceed 82 decibels; the noise level near the driver's ear should not exceed 90 decibels. Any interior noise below 60 decibels falls within the acceptable range. Car noise is categorized into interior noise and exterior noise - the former affects passenger comfort while the latter causes environmental noise pollution. Sources of automotive noise include: engine noise, wind resistance noise, air conditioning noise, tire noise, transmission system vibration, body torsion and vibration, and braking noise.
11
0
Share

Is the Prado Full-Time 4WD or Part-Time 4WD?

The Prado is equipped with part-time 4WD. Part-time 4WD is a type of four-wheel drive system that allows the driver to switch between two-wheel drive and four-wheel drive modes by engaging or disengaging the transfer case according to road conditions, enabling free conversion between 2WD and 4WD. The Prado is an imported ORV with a body length, width, and height of 4840mm, 1855mm, and 1890mm respectively, and a wheelbase of 2790mm. The Prado is powered by a 3.5L V6 naturally aspirated engine, delivering a maximum power of 206 kW and a maximum torque of 365 Nm, paired with a 6-speed automatic transmission.
20
1
Share

How to reset the maintenance reminder on Lavida?

To reset the maintenance reminder on the Lavida, follow these steps: 1. Turn off the ignition switch; 2. Press and hold the 00 button on the instrument panel; 3. Turn on the ignition switch while keeping the 00 button pressed; 4. Release the 00 button when one of the following messages appears on the instrument panel display, then select "Reset maintenance data"; 5. Press the 00 button again to confirm. The Lavida is a sedan produced by SAIC Volkswagen, with body dimensions of 4670mm in length, 1806mm in width, and 1474mm in height, and a wheelbase of 2688mm. In terms of power, the Lavida is equipped with a 1.5L naturally aspirated engine and a 1.4L turbocharged engine.
9
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.