···
Log in / Register

How to adjust the rearview mirror on Golf 7?

3 Answers
OLane
07/28/25 4:45pm
The method to adjust the rearview mirror on Golf 7 is: There is a square button next to the window lift switch with the letters 'L' and 'R' which can be used for adjustment. The car's rearview mirror reflects the conditions behind, beside, and below the vehicle, allowing the driver to indirectly see these areas clearly. It acts as a second pair of eyes, expanding the driver's field of vision. The Golf 7 refers to the seventh generation of the Golf model, with dimensions of 4255mm in length, 1799mm in width, and 1452mm in height, and a wheelbase of 2637mm. The car is equipped with a 1.6L engine, delivering a maximum power of 81 kW and a maximum torque of 155 Nm, paired with a 5-speed manual or 6-speed automatic transmission.
Was this review help?
16
1
Share
DeAlexis
08/11/25 8:56pm
When I used to drive a Golf 7, I always had to teach friends how to adjust the rearview mirrors. The knob on the driver's door handle is key—turn to L for the left mirror, R for the right, and use the four-way toggle for fine-tuning the mirror angle. When adjusting the right side, make sure to turn the knob to the R position first, or you'll waste your effort. After adjusting, remember to turn it back to the middle position, otherwise the heating function might be accidentally activated. Once during heavy rain, I forgot to reset it, and the mirror heating dried the raindrops—super useful! The folding function is at the bottom position of the knob—just flick it to retract the mirrors when passing through narrow roads. This car also has a reverse tilt feature: when in R gear, hold down the mirror adjustment button you want, and the mirror will automatically tilt down to show the rear wheel.
Was this review help?
13
1
Share
Expand All
LeEthan
09/29/25 7:37am
Last week, I accompanied my cousin to pick up a used Golf 7 and specifically demonstrated the blind spot adjustment technique for the rearview mirrors. The square knob on the door control panel is the key, with clear L/R markings. The crucial point is to adjust the seat to your preferred position before setting the mirrors, as leaning forward or backward can affect visibility. Here’s how to adjust the side mirrors: the left mirror should show 1/4 of the car body, while the right mirror should have the horizon slightly below the center line. If you encounter high-beam offenders at night, simply push the black lever at the bottom edge of the rearview mirror for manual anti-glare, which is more reliable than the electronic version. Models with memory function are even more convenient—once you save your seating position in the car’s system, the rearview mirror angles adjust automatically to match the memory.
Was this review help?
10
1
Share
Expand All
More Forum Discussions

How to Deal with the Continuously Illuminated Tire Pressure Monitoring Light on Lavida?

Turn on the ignition switch, press and hold the SET button of the tire inflation pressure control system until the dashboard indicator light comes on. Wait for the system to confirm the storage of new parameters, and the tire pressure monitoring light will automatically turn off, completing the reset. Below are the specific methods to eliminate the tire pressure monitoring light: 1. First, turn off the engine, then turn on the power for vehicle self-inspection. Press and hold the tire pressure monitoring button on the right front side of the gear shift lever for about three seconds until you hear a "ding" sound. Release the button to eliminate the tire pressure warning light on the dashboard. 2. If the light cannot be eliminated, visit a Volkswagen after-sales service center. Have the staff check the tire pressure and related systems such as sensors. After confirming there are no faults, use a specialized decoder to clear the tire pressure warning light on the vehicle.
18
2
Share

What does the engine fault light EDC mean?

EDC fault light indicates that there is a problem with the engine electronic control system, reminding the owner to go to the repair shop for inspection and maintenance as soon as possible. Here is some information about EDC: 1. The full name of EDC is Electric-Diesel-Control, which means electronic control system for diesel injection; its task is to electronically control the fuel injection system to achieve real-time control of fuel injection quantity and timing according to operating conditions. 2. When EDC appears on the car dashboard, it indicates an engine fault. When the EDC fault light comes on, it means there is a problem with the engine.
7
0
Share

What is the principle of car tire pressure monitoring?

Car tire pressure monitoring principle depends on the type of monitoring device, specifically introduced as follows: 1. Direct tire pressure monitoring: Uses pressure sensors installed inside the tires to measure air pressure, and wireless transmitters to send pressure information from inside the tire to a central receiver module. 2. Indirect tire pressure monitoring: When tire pressure decreases, the vehicle's weight causes that wheel's rolling radius to become smaller. By comparing rotational speed differences between tires, it achieves the purpose of monitoring tire pressure. 3. Functions of tire pressure monitoring: Prevent accidents; Extend tire service life.
9
1
Share

What to Do When the Car Key Won't Come Out?

When a car key won't come out, it's not necessarily a malfunction. There are two common scenarios: first, the key won't come out after turning off the engine; second, the key can't be turned after insertion. Here are the details: 1. Key won't come out after turning off the engine (common in automatic transmission models): In this case, the owner should check if there's any obstruction in the gear slot. Remove the obstruction, start the car, shift the gear again to ensure it's fully back in place, and then the key can be pulled out. 2. Key can't be turned after insertion: This is actually the car's automatic steering wheel lock function, a simple anti-theft feature. To resolve this, turn the key forcefully with your right hand while gently shaking the steering wheel left and right with your left hand, and the key will turn.
1
3
Share

What are the effects of overfilling engine oil?

The effects of overfilling engine oil are: 1. Intense agitation between engine components, leading to excessive engine load and power loss; 2. Oil splashing onto cylinder walls and entering the intake system through the crankcase ventilation system, causing oil burning issues. The method for changing engine oil is: 1. Lift the vehicle with a jack, locate and loosen the drain plug to drain the oil; 2. Remove the oil filter and place a container beneath it; 3. Install a new oil filter and add fresh oil. The functions of engine oil are: 1. Reduce friction and high temperatures; 2. Cool down the engine; 3. Clean and remove contaminants; 4. Dampen vibrations; 5. Prevent rust and corrosion.
2
3
Share

How to Replace the Spark Plugs of Chery Tiggo 3?

Chery Tiggo 3's spark plug replacement method is as follows: 1. Clean the dust around the engine cylinder wires to prevent dust from entering the engine during replacement; 2. Use a wrench to loosen the spark plugs in the engine, remove the old spark plugs, then install the new spark plugs and screw them back in. The Chery Tiggo 3 is a compact SUV with the following dimensions: length 4420mm, width 1760mm, height 1670mm, wheelbase 2510mm, fuel tank capacity 55 liters, and trunk capacity 550 liters. The Chery Tiggo 3 is equipped with a 1.5L naturally aspirated engine with a maximum horsepower of 116.
13
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.