How to Adjust the Rearview Mirror on a Passat?

1 Answers
VonKeegan
07/30/25 1:15am
On the interior of the left front door, there is a round button for adjustment. Below is an introduction to adjusting the rearview mirror on a Passat: 1. The knob next to the button is labeled with L and R. Rotate the knob to L to adjust the angle of the left rearview mirror. 2. Rotate the knob to R to adjust the angle of the right rearview mirror. 3. Rotate the knob to 0 to adjust the angle of the left rearview mirror. Additional Information: 1. Rearview mirror adjustment is to see the ground markings, avoid crossing lines, and observe the relative position between the car body and the parking lines to steer in time. 2. Before adjusting the rearview mirror, you must first adjust the vehicle seat and steering wheel position.
Was this review help?
8
4
Share
More Forum Discussions

How Long Does It Take for the Traffic Management 12123 Subject 2 Appointment to Be Processed?

Subject 2 exam appointment processing time is within five working days. You can check the latest status of the processing on the Traffic Management 12123 app. Due to limitations in the number of test centers in different regions, the number of applicants, and the specific exam progress, it is difficult to determine exactly how many days it will take to see the appointment result. However, the latest you can see the appointment result is within five days. Additionally, there may be slight differences between different test centers, so it is best to refer to the time displayed in the appointment result. How to Schedule a Subject 2 Exam: Log in to the Traffic Management 12123 app, click on 'More' located on the right side of the homepage, scroll down to find 'Driver's License Services,' and select 'Schedule Exam Time.' On the pop-up interface, choose the test center location and submit the appointment. This completes the Subject 2 exam scheduling. Other subjects can also be scheduled in the same way. How to Cancel an Appointment: Applicants who need to cancel their appointment can visit the Vehicle Management Office to process the cancellation. Bring the original and a copy of your ID card, and complete the cancellation process at the office's service hall. Write a cancellation declaration in the blank space of the ID card copy. Once processed, the appointment will be canceled and will not be marked as a no-show.
18
3
Share

Do You Start from the Beginning If You Fail the Second Subject Test for the First Time?

After failing the first time, you start from the next item after the one you failed, and then proceed again through the failed subject until you reach the starting point to complete the test. If you fail right from the starting point, you won't get a second chance, and there will be a voice prompt to inform you. Subject One: If you fail Subject One, you can retake it immediately on the spot. If you still fail, after paying the fee, you can take the second test in the afternoon. If you fail the second time, you'll have to wait several months, pay again, and retake the test. Subject Two: For Subject Two, you get one test attempt, and if you fail, you can retake it once. If you don't participate in the retest or fail the retest, the current test session ends, and the applicant must reschedule the test after ten days. Within the validity period of the driving skill test permit, the number of Subject Two test appointments cannot exceed five. If you fail the fifth test, the results of other subjects you previously passed will be invalidated. Subject Three: Subject Three is the same as Subject Two, with the number of test appointments not exceeding five. Subject Four: Currently, there are no appointment restrictions for Subject Four, but the driving skill test permit is valid for three years. If the applicant fails to complete the test within the validity period, the results of any previously passed subjects will be invalidated.
9
3
Share

When is the best time to use the car's eco mode?

It is better to use the car's eco mode in congested urban road conditions. The eco mode is divided into active eco driving mode and non-active eco driving mode. The working principle of the eco mode is: to reduce energy consumption by changing the shift time of the transmission, changing the sensitivity of the accelerator pedal, and changing the output power of the air conditioning system. The engine power in eco mode will appear weak, and the vehicle's acceleration performance will be reduced. The carbon deposits produced by the engine in eco mode are not much different from those produced by the engine under normal working conditions, so you can use the ECO mode normally when it is turned on.
2
1
Share

What brand are the tires on the Mitsubishi ASX?

The original tires of the Mitsubishi ASX are Dunlop, with the specification 215/60R17. The yellow dot on the tire is a light point mark, indicating the lightest spot on the tire. Since a car wheel consists of the tire, rim, and valve stem, and the valve stem is the heaviest part of the tire, these two points complement each other to achieve tire balance. Below is some information about tires: 1. Tire specifications: Tire specifications are data that indicate the parameters and performance of the tire. Generally, tire specifications are a set of numbers, with the first number representing the tire section width and the last number representing the rim diameter, both measured in inches. The letters or symbols in between have special meanings: "x" indicates a high-pressure tire; "R" or "Z" indicates a radial tire; "-" indicates a low-pressure tire. 2. Tire rolling direction: The tread pattern on a tire is crucial for drainage and anti-skid performance while driving. Therefore, off-road tires with asymmetric tread patterns often use arrow markings to indicate the assembly rolling direction, ensuring the designed grip, anti-skid, and other performance characteristics. 3. Tire production batch number: A set of numbers and letters indicates the manufacturing date and quantity of the tire. For example, "98N08B5820" means the 5,820th tire produced in Group B in August 1998. The production batch number helps identify the age and storage time of the tire.
3
2
Share

What to do if the Tiggo 8 has a P-gear failure?

Tiggo 8 has a P-gear failure. The solution is to go to a professional 4S shop for professional maintenance. You can check the car's transmission or whether there is a problem with the transmission gear. The Tiggo 8 is equipped with a 6-speed DCT transmission, which comes from Aisin in Japan. The following is an introduction to the Tiggo 8 model: 1. Body size: The body length is 4700mm, the width is 1860mm, and the height is 1746mm. 2. Configuration: The new car adopts the latest LION4.0 Xiongshi Zhiyun intelligent Internet system. The Tiggo 8-PLUS introduces the virtual image of the intelligent assistant "Xiaoqi" for the first time, which can not only interact with users through voice, but also express expressions such as happiness, regret, and listening according to the scene, and can provide full-scene accompanying active care. 3. Power: It provides two power systems: 1.6TGDI traditional fuel power and 1.5TCI+48V light hybrid power. The 1.6TGDI engine has a maximum power of 145kW and a peak torque of 290Nm. It adopts the evaluation standard of aero engine technology and Chery's iHEC (Intelligent Efficiency) combustion system and other cutting-edge technologies, and is equipped with ISS intelligent start-stop function.
13
1
Share

What does invalid exhaust remote sensing mean?

Invalid exhaust remote sensing indicates that the vehicle's emissions do not meet the required standards. Exhaust remote sensing is a method used by traffic authorities to monitor 'black smoke vehicles' and non-compliant 'yellow label vehicles' with substandard emissions. Through a system platform, it tracks the actual operational status of various inspection stations, allowing environmental protection departments to utilize big data to derive environmental statistics. The working principle of exhaust remote sensing is as follows: it sends ultraviolet and infrared light from a light source to an optical reflector on the opposite side of the road, which then reflects the light back to a detector. As a vehicle passes through these light beams on the road, its exhaust gases absorb the light, altering the intensity of the transmitted light. By monitoring changes in light intensity within the detector, the system measures the concentration of nitrogen oxides, hydrocarbons, and carbon monoxide emitted by vehicles on the road.
19
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.