How to adjust the rearview mirror of Volkswagen Polo?

1 Answers
LaElla
07/30/25 10:49am
Volkswagen Polo rearview mirror adjustment is done by moving the knob on the driver's side. Volkswagen Polo exterior and interior: The Volkswagen Polo features a sporty and stylish exterior with a compact interior. It has straight waistlines and a low chassis, with LED side turn signals, which is a relatively mainstream configuration nowadays. Volkswagen Polo handling characteristics: It maintains good stability and operability, with no noticeable floating feeling at high speeds. It offers handling precision that is unmatched by other vehicles in its class, remaining accurate whether accelerating or decelerating at low speeds or maneuvering through traffic with ease.
Was this review help?
9
3
Share
More Forum Discussions

Will stepping on the accelerator cause failure in Subject 2?

No. The Subject 2 driving test does not require stepping on the accelerator. Subject 2 is a closed-course test where you can drive in first gear throughout the entire process without needing to press the accelerator. Below are precautions for Subject 2: 1. Adjust the seat properly: The seat should be adjusted to a comfortable position that suits your habits, neither too far forward nor too far back; 2. Adjust the rearview mirrors: The left rearview mirror should be adjusted to a position where you can easily see the left rear door handle and left rear wheel, while the right rearview mirror should be adjusted to the lowest position, with the right front handle visible in the middle of the mirror from the driver's seat; 3. Fasten the seat belt: Buckle up as soon as you get in the car, and make sure to listen carefully to voice prompts. Develop the good habit of using turn signals—there are three instances during Subject 2 where you need to signal (starting, hill start, and exiting parallel parking); 4. Pay attention to speed control: Mainly achieved by adjusting the clutch pedal height, and you may lightly press the brake if necessary, but avoid stopping completely. The key points are slow speed and quick steering.
11
1
Share

How many points are deducted for the front of the car touching the line in Subject 2?

Touching the line means the car body crosses the line. In the Subject 2 exam, crossing the line results in a deduction of 100 points, and the exam is considered failed. In addition to the car body crossing the line, other actions that result in a 100-point deduction include failing to enter the garage during reverse parking, stopping midway, not following the prescribed route or sequence, and exceeding the allotted time. The full score for Subject 2 is 100 points, with evaluation criteria set for failing, deducting 20 points, deducting 10 points, and deducting 5 points. The exam is considered passed under the following conditions: ① For applicants of large buses, trailers, city buses, medium buses, and large trucks, a score of 90 or above is required; ② For other vehicle types, a score of 80 or above is required. If you fail the Subject 2 exam, you are allowed one retake on the spot. If you do not take the retake or fail the retake, the exam is terminated, and the applicant must reschedule the exam after ten days. During the validity period of the driving skills test permit, the number of rescheduling attempts for Subject 2 and Subject 3 road driving skills exams must not exceed five. If the fifth rescheduled exam is still failed, the results of other previously passed subjects will be invalidated.
18
2
Share

How to Use Tesla Key Fob Summon Feature?

Tesla key fob summon feature usage guide: 1. The fob has three buttons (front, middle, rear). Press the front button twice consecutively to open both trunk and frunk; 2. Press the middle button twice to unlock doors and extend door handles; 3. Press the rear button twice to open the frunk. Taking the 2021 Model 3 Standard Range Plus as an example: Manufacturer - Tesla China, vehicle class - midsize sedan, transmission - single-speed electric gearbox. Dimensions: 4694mm (L) x 1850mm (W) x 1443mm (H), wheelbase 2875mm, body style - 4-door 5-seat sedan, top speed 225 km/h.
10
3
Share

Why Can't the Cause of Air Leakage in Tubeless Tires Be Found?

It may be due to poor sealing between the tire and the rim, foreign objects at the sealing area between the tire and the rim, or deformation that makes it difficult to detect. The reasons for tire air leakage are as follows: Punctured by foreign objects: Common foreign objects that can puncture tires include nails, screws, wires, glass fragments, sharp stones, and tile pieces. Among these, nails and screws are most likely to penetrate the tire, causing a slow leak. They may also remain lodged in the puncture site, and if not removed promptly, can worsen the damage to the tire. Damage to the tire sidewall and inner edge: Besides the tire tread being vulnerable to damage from hard objects, the sidewall and inner edge are also weak points. Some drivers with poor spatial awareness often scrape the tire sidewalls against curbs, leading to gradual wear. Damage to the inner edge of the tire usually occurs during improper installation or removal of the tire from the rim, often during tire replacement or after a repair. Both sidewall and inner edge damage can cause slow leaks and significantly increase the risk of a blowout. Deformation of the rim flange: When a car tire is fully inflated, the outer edge of the tire tightly seals against the rim flange to prevent gas leakage. If the rim flange is deformed due to impact, it can compromise the seal with the tire's outer edge, resulting in a slow leak.
18
4
Share

What maintenance items does a car with 60,000 kilometers need?

A car with 60,000 kilometers needs the following maintenance items: 1. Replace engine oil and oil filter: Changing the engine oil and oil filter is a mandatory task for every maintenance; 2. Replace cabin air filter: To ensure fresh air when using the car's air conditioning, the cabin air filter should be replaced regularly; 3. Replace engine air filter: The engine air filter should be replaced every 10,000 to 15,000 kilometers; 4. Replace brake fluid, transmission fluid, and spark plugs. Car maintenance refers to the preventive work of regularly inspecting, cleaning, supplying, lubricating, adjusting, or replacing certain parts of the car. The purpose is to keep the car clean, maintain normal technical conditions, eliminate hidden dangers, prevent faults, slow down the deterioration process, and extend the service life.
14
1
Share

What Are the Reasons for the Engine Light Being On but the Car Running Normally?

The reasons for the engine light being on but the car running normally are: 1. The vehicle's exhaust emissions do not meet the standards, mainly due to excessive carbon deposits; 2. Malfunction of internal components in the engine system; 3. Malfunction in the transmission system. In this case, you can continue driving temporarily, but for safety reasons, it is recommended to drive at low to medium speeds and then immediately take the car to a nearby repair shop for inspection. Consequences of not addressing the engine light promptly: Increased temperature in the engine combustion chamber, accelerated wear, increased fuel consumption, and even potential early engine damage, ultimately leading to poorer exhaust emissions and environmental pollution.
5
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.