How to adjust the rearview mirror of the Refine M3?

1 Answers
EleanorLynn
07/30/25 7:04am
The method to adjust the rearview mirror of the Refine M3 is as follows: The electric adjustment button for the rearview mirror is located at the lower left side of the dashboard, which is a black square button. Move the lever to the left to adjust the left rearview mirror, and use the up, down, left, and right buttons for fine-tuning. Moving the lever to the right adjusts the right rearview mirror. The Refine M3 has dimensions of 4715mm in length, 1765mm in width, and 1900mm in height, with a wheelbase of 2810mm and a fuel tank capacity of 55 liters. The front suspension of the Refine M3 is a double-wishbone torsion bar independent suspension, while the rear suspension is a leaf spring non-independent suspension. It is equipped with a 1.5L turbocharged engine, delivering a maximum power of 110kW and a maximum torque of 210Nm, paired with a 5-speed manual transmission.
Was this review help?
4
5
Share
More Forum Discussions

What Does AUX Mean?

AUX refers to an audio input interface that can output audio from electronic audio devices including mp3 players, allowing the music from these devices to be played through the car's audio system. AUX is short for Auxiliary, representing an additional signal line design. In general audio equipment, besides the standard output and input ports, there are often several ports labeled AUX, serving as backup connection terminals. The AUX port is an asynchronous port primarily used for remote configuration, dial-up connections, and can also connect with MODEMs via transceivers, supporting hardware flow control.
9
3
Share

What is the body width of the Highlander?

The body width of the Highlander is 1925 millimeters, with a length and height of 4890 millimeters and 1720 millimeters respectively, and a wheelbase of 2790 millimeters. The Highlander is a mid-size SUV launched by GAC Toyota, and its body gives a very imposing impression. The side of the car features a three-dimensional waistline that runs from the front fender all the way to the rear, visually elongating the car's body dimensions. To meet the diverse needs of consumers, the Highlander offers multiple models for selection, including both five-seater and seven-seater versions.
4
5
Share

What Causes a Diesel Vehicle to Indicate Water in the Fuel?

Diesel vehicle indicating water in the fuel is most likely caused by a damaged fuel filter, which requires inspection and replacement to resolve the issue. Below is relevant information about automotive fuel filters: Function: Almost all vehicles are equipped with a fuel filter, which filters out water and impurities from the fuel, ensuring that the fuel entering the engine is free of water. Maintenance: Fuel filters need to be regularly inspected or replaced for maintenance. Otherwise, they may fail to properly filter impurities and water from the fuel, directly affecting the engine's normal operation.
10
5
Share

What are the differences between Shandeka G7 and C7H?

Here are the specific differences between Shandeka G7 and C7H: Different positioning: The luxury version C7H, as the name suggests, is relatively more abundant in overall configuration and offers a better comfort experience. The G7 Classic version, on the other hand, is more practical and targeted at users with essential needs, making it more economical in positioning. Different appearance: The most obvious difference in appearance between Shandeka G7 and C7H is the color of the front grille emblem. The emblem on the C7H is gold, giving it a very luxurious feel, while the emblem on the G7 is silver, representing a classic look.
20
3
Share

Is It Normal for the Inner Side of Car Hubs to Rust?

It is normal for the inner side of car hubs to rust because they are made of metal materials. Long-term exposure to oxygen in the air leads to oxidation and rusting, which is a natural occurrence. Below is a detailed introduction to car hubs: Overview: The car hub is the central part of the wheel where the axle is mounted, commonly referred to as the "rim" or "steel wheel." Hubs are prone to accumulating dirt, and if not cleaned for a long time, they may corrode or deform, posing safety hazards. Therefore, special attention should be paid to hub maintenance. Classification: In the market, hubs can be categorized into steel hubs and alloy hubs based on material, each with its own advantages and disadvantages.
9
4
Share

Why does the fan keep running after parking?

The reasons why the fan keeps running after parking: 1. The car's fan has a cooling function. When the coolant temperature is too high after parking, the vehicle's computer will automatically calculate the fan's speed and duration. The higher the temperature, the longer the fan runs to protect the engine; 2. If the fan continues to run even after the engine temperature has dropped, it may be due to a loose circuit connection. You can try disconnecting the fan's wiring harness for a separate power-off treatment; 3. A faulty coolant temperature sensor or a stuck fan relay contact may require replacement at a repair shop. If the fan still runs after turning off the engine, check whether it's normal cooling or a malfunction.
15
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.