How to Adjust the Rearview Mirror of the Boyue Million Edition

How to turn on the fog lights on the Roewe RX5?

The method to turn on the fog lights on the Roewe RX5 is: 1. With the ignition switch in the ON position and the position lights turned on, rotate the fog light switch one notch to turn on the front fog lights; 2. After the front fog lights are turned on, rotate the fog light switch another notch to turn on the rear fog lights. Taking the 2020 Roewe RX5 Manual Internet Million Edition as an example, it is a compact SUV with body dimensions of: length 4556mm, width 1855mm, height 1719mm, and a wheelbase of 2700mm. The 2020 Roewe RX5 Manual Internet Million Edition is equipped with a 1.5L turbocharged engine, with a maximum horsepower of 169PS and a maximum power of 124kW.

8

4

Share

Does the Baojun 310w have a 7-seater version?

The Baojun 310w does not have a 7-seater version; it is a 5-door, 5-seater station wagon. Taking the 2020 Baojun 310w as an example, its body dimensions are: length 4620mm, width 1710mm, height 1535mm, with a wheelbase of 2750mm. It has a fuel tank capacity of 40 liters and a luggage compartment capacity of 740 liters, with a curb weight of 1206kg. The 2020 Baojun 310w is equipped with a 1.5L naturally aspirated engine, delivering a maximum horsepower of 105PS, maximum power of 77kW, and maximum torque of 135Nm, paired with a 5-speed mechanical automatic transmission.

15

1

Share

What number should I call if a vehicle is blocking the entrance?

Call 122 to report to the traffic police, then report the illegal parking and wait for the traffic police to tow the vehicle away. If the vehicle is not parked illegally, you can also call the owner to ask them to move the car. If you cannot find the owner's contact number, you can call 114. There is a service where you provide the operator with the brand and location of the vehicle, and the owner's phone will be directly connected to the vehicle owner's mobile, but the owner's number will not be disclosed. However, this method has a drawback: the owner of the provided vehicle license plate must have this service activated with China Unicom. If the owner is not registered, this method will not work. It's important to note that even if you cannot contact the owner, you should not damage the vehicle, as doing so would be illegal.

6

0

Share

How to Bleed Air from a Car Radiator?

To bleed air from a car radiator, follow these steps: 1. Open the front hood and remove the thin hose located under the vehicle's top; 2. Start the engine and let it idle after filling the radiator halfway with water; 3. Continue adding water slowly until water flows out from the thin hose; 4. Reconnect the thin hose and fill the radiator completely with water; 5. Wait for the electric fan to turn on, then turn off the engine. Once the water temperature drops, check if more water is needed and top it up if necessary. The radiator, also known as a heat exchanger, is a key component in the car's cooling system. Its function is to dissipate heat. The coolant absorbs heat in the water jacket, flows to the radiator to release the heat, and then returns to the water jacket to complete the cycle, thereby regulating the temperature.

16

5

Share

Can a Scuffed Engine Cylinder Be Repaired?

Engine cylinder scuffing can be repaired, but it requires replacing all the piston rings. For vehicles with cylinder scuffing, a major engine overhaul is necessary, commonly referred to as "cylinder boring." Engine cylinder scuffing refers to the presence of noticeable longitudinal mechanical scratches and abrasions on the inner wall of the cylinder within the range of piston ring movement. In severe cases, adhesive wear may occur, leading to difficulties in starting the engine or causing it to stall unexpectedly. Cylinder scuffing is a major engine failure, and the root cause is the inability to form an oil film between the cylinder wall and the piston rings or pistons, resulting in poor lubrication or even dry friction. There are various specific reasons for engine cylinder scuffing, which can be broadly categorized into three aspects: 1. Piston assembly-related causes; 2. Cylinder liner-related causes; 3. Usage-related causes.

16

5

Share

What are the functions of an automobile engine lubrication system?

The functions of an automobile engine lubrication system include lubrication and more. Below are the detailed explanations: Lubrication: Engine oil forms an oil film between moving parts, reducing friction resistance and power loss, and minimizing wear on components. Cooling: By utilizing the fluidity of engine oil, it carries away some of the heat from engine parts, preventing excessive temperatures and potential damage. Cleaning: Circulating engine oil carries away metal particles generated during engine operation, dust inhaled from the atmosphere, and some solid substances produced by fuel combustion, preventing the formation of abrasives between parts that could accelerate wear. Sealing: Using the viscosity of engine oil, it adheres to the surfaces of moving parts, enhancing the sealing effect and reducing gas leakage. Rust prevention: The lubricating oil film adheres to metal surfaces, isolating air and moisture, thereby providing rust and corrosion protection.

13

3

Share

How to Adjust the Rearview Mirror of the Boyue Million Edition

How to turn on the fog lights on the Roewe RX5?

Does the Baojun 310w have a 7-seater version?

What number should I call if a vehicle is blocking the entrance?

How to Bleed Air from a Car Radiator?

Can a Scuffed Engine Cylinder Be Repaired?

What are the functions of an automobile engine lubrication system?

How to Check the Tire Pressure Monitoring on the X-Trail?

What are the engine specifications of the Lynk & Co 01?

Can You Wash the Engine with Water When Cleaning the Car?

What is the working principle of an engine supercharger?