How to adjust the rearview mirror of Polo?

1 Answers
VanTaylor
07/29/25 10:30pm
The adjustment method for the Polo's rearview mirror is: turn the knob to the left to adjust the left mirror, and to the right to adjust the right mirror. The '0' mark represents the neutral position. When the knob is rotated to the neutral position, it prevents accidental changes to all previous settings. Taking the 2021 Polo Plus 1.5L Manual Panorama Enjoyment Edition as an example, this car is a compact vehicle with a 1.5L inline four-cylinder engine and natural aspiration. It has a maximum horsepower of 113ps, a maximum torque of 145nm, a 5-speed manual transmission, and a 5-door, 5-seat hatchback body type. The dimensions are 4053mm in length, 1740mm in width, and 1449mm in height, with a wheelbase of 2564mm. The top speed is 190km/h, with front-wheel drive, electric power steering, and a unibody structure.
Was this review help?
10
0
Share
More Forum Discussions

Does the Volkswagen Dry Dual Clutch Transmission Need an Oil Change?

Volkswagen's dry dual-clutch transmission requires a transmission oil change. Here are more details about Volkswagen's dry dual-clutch transmission: 1. Volkswagen has two types of transmission oil: one is mechanical gear oil, also known as gear oil; the other is transmission lubricating oil, also known as gearbox oil. The transmission lubricating oil does not need to be changed, but regardless of the type of transmission, an oil change is necessary. 2. Volkswagen's DSG dual-clutch automatic transmission is essentially a manual transmission with a dual-clutch system and shifting mechanism: the automatic transmission oil in the sealed transmission not only serves a lubricating function but also powers the DSG's shifting valve body and the AT transmission's torque converter through oil pressure. Dirty or deteriorated transmission oil can lead to unstable oil pressure, and prolonged driving under such conditions can cause damage to the transmission.
7
0
Share

Testing Procedure for Throttle Position Sensor

Throttle position sensor is also known as throttle opening sensor or throttle switch. The testing procedure for throttle position sensor is as follows: 1. Read data stream. When reading the data stream of TPS, slowly press and release the accelerator pedal for observation to prevent floor mats from obstructing the opening or closing of the throttle, which may lead to inaccurate test data. 2. Measure the voltage of throttle position sensor. The signal voltage of throttle position sensor increases with the opening of throttle. When the throttle is fully opened, its signal voltage is close to 5V, and when the throttle is closed (idle), its signal voltage is about 0.5V. 3. Test by unplugging the sensor connector. For cars equipped with automatic transmission, if it is suspected that the abnormal throttle position sensor (TPS) causes the automatic transmission to shift impact, the TPS plug can be unplugged for test driving, and manual shifting can be used. If the upshift and downshift are smooth at this time, it means that the mechanical part of the automatic transmission is normal, the problem lies in the control part, and the TPS may be faulty.
9
1
Share

Is the 10th-generation Accord compliant with China National V or VI emission standards?

The 10th-generation Accord complies with China National V, the fifth-stage national emission standard for motor vehicle pollutants. This standard, equivalent to Europe's Euro 5 emission standards currently in effect, imposes stricter limits on vehicle emissions such as nitrogen oxides, hydrocarbons, carbon monoxide, and particulate matter. Taking the 2021 10th-generation Accord as an example, it is a mid-size sedan with body dimensions of 4893mm in length, 1862mm in width, and 1449mm in height, featuring a wheelbase of 2830mm and a curb weight of 1495kg. This model is equipped with a 1.5T inline 4-cylinder turbocharged engine, delivering a maximum torque of 260Nm and a maximum power of 143kW, paired with a continuously variable transmission (CVT).
11
2
Share

What to Do If the Car Door Seal is Poor?

If the car door seal is poor, you can adjust the latch striker inward. Use a ratchet wrench that matches the fixing screws of the door latch striker to loosen the striker, then move it slightly inward to make the door close tighter. After several adjustments, you can find the optimal position, which will enhance the door's sealing performance, make the closing sound more solid and pleasant, and reduce driving noise. Solutions for excessive car noise include: 1. Paste sound-absorbing foam material under the engine hood; 2. Install sound-absorbing cotton material at the bottom of the trunk and on the wheel arches on both sides of the trunk; 3. Install professional damping plates in areas prone to noise; 4. Install sealing strips inside the doors; 5. Replace the tires.
17
3
Share

What is the tire specification for the Ford EcoSport?

Ford EcoSport comes with two types of tire specifications. One is the Maxxis tire with the model number 205/60R16, and the other is the Michelin tire with the model number 205/50R17. Here, 205 indicates the tire width of 205mm, 60 represents the aspect ratio of 60%, R stands for radial construction, and 16 denotes the wheel diameter of 16 inches. Taking the 2019 Ford EcoSport as an example, it belongs to the compact SUV category with body dimensions of 4345mm in length, 1785mm in width, and 1659mm in height, a wheelbase of 2530mm, a fuel tank capacity of 52 liters, and a trunk capacity of 384 liters. This model is equipped with a 1.5L naturally aspirated engine delivering a maximum horsepower of 120PS, a maximum power of 88kW, and a maximum torque of 150Nm, paired with a 6-speed automatic transmission.
20
2
Share

What to Do If 92 Octane Gasoline Is Accidentally Filled with 98 Octane?

Filling a car that normally uses 92 octane gasoline with 98 octane is generally not a problem, but long-term mixing of different octane levels should be avoided. If a vehicle is designed for 95 or 98 octane gasoline and is filled with 92 octane, it may cause issues, especially if 92 octane is used continuously over time. This can lead to increased knocking frequency and accelerated engine wear. Different octane levels have varying utilization rates and combustion efficiencies in the engine. The octane rating represents the ratio of the actual gasoline's anti-knock properties to those of standard gasoline, with higher numbers indicating stronger anti-knock performance. Standard gasoline is composed of isooctane and n-heptane, and higher octane numbers are not necessarily better. It's important to choose the appropriate gasoline octane based on the engine's compression ratio.
4
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.