How to Adjust the Rearview Mirror of Haval F5?

2 Answers
SamanthaAnn
07/24/25 4:31am
Haval F5 rearview mirror adjustment method: The electric adjustment knob is located on the main driver's side door trim panel, in front of the window lift switch. To use it, rotate the adjustment knob to the corresponding left or right exterior rearview mirror, and adjust the mirror by moving the knob forward, backward, left, or right. After adjustment, return the knob to the middle position. As the first model under the Haval F series, the Haval F5 is positioned as an entry-level compact SUV, with body dimensions of 4470mm in length, 1857mm in width, and 1638mm in height, and a wheelbase of 2680mm. The Haval F5 is equipped with the Haval Interconnect 3.0 system, including remote vehicle control, online services, intelligent services, and an intelligent voice interaction system.
Was this review help?
8
3
Share
GiannaRose
08/11/25 12:07am
As a driver with ten years of experience, I can tell you that adjusting the mirrors on the Haval F5 is quite simple. The adjustment button is located on the inner side of the driver's door—there's a small switch. First, press it to select either the left or right mirror, then use the arrow buttons to adjust the position slowly up, down, left, or right. I recommend sitting upright while adjusting and setting the mirrors so you can see a little bit of the car body—this makes lane changes or reversing safer by reducing blind spots. After years of driving, I've learned that mirror angle is crucial, so I make it a habit to check them before every drive. If your model has an electric folding feature, pressing the folding button will retract the mirrors, making parking much easier. Don't rush to drive after adjusting—test the view first to ensure safety. For shared vehicles, check if there's a memory setting for quick restoration.
Was this review help?
16
0
Share
Expand All
More Forum Discussions

How to Turn On the Mazda Lock Sound?

The method to turn on the Mazda lock sound is to select the lock option in the car's onboard computer settings and click 'Lock On' to enable the lock horn sound function. To turn it off, first, press and hold the lock button until the car beeps once, then simultaneously press the unlock and lock buttons together. The car will beep again, and then press the unlock button to switch the car to a silent mode with hazard lights flashing but no horn sound. Below are the reasons why there might still be no lock sound after setting: 1. Poor contact or damage to the lock sound buzzer. If the vehicle still does not produce a lock sound after pressing the mute button, it indicates that the buzzer is damaged and can only be resolved by replacing it. 2. Accidentally pressing the mute button on the key. When the mute button is pressed, the lock sound will disappear. Simply press the lock mute button again to restore the lock sound.
14
3
Share

What are the advantages of manual over automatic?

Manual transmission offers a stronger driving experience and better control. Low gears provide excellent speed control capability and have advantages when driving downhill or on snowy roads. They are also easier to maintain and more affordable. The operational difficulty differs between automatic and manual transmissions: Manual transmissions primarily rely on the driver manually operating the clutch to shift gears; automatic transmissions mainly depend on the hydraulic transmission principle of torque converters to automatically complete gear shifts. The safety aspects differ between automatic and manual transmissions: The neutral gear in manual transmission vehicles causes loss of power, creating potential safety hazards during driving; automatic transmission vehicles cannot use neutral while driving, making this driving method safer. Manual transmission refers to manually moving the gear lever to change the gear engagement device inside the transmission, altering the gear ratio to achieve speed variation. Automatic transmission means the driver doesn't need to shift gears manually, as the vehicle automatically selects the appropriate gear based on driving speed and traffic conditions.
19
5
Share

How long after car ceramic coating should you avoid rain?

After ceramic coating, the car should avoid rain for 24 hours, avoid wiping the paint surface for three days, and avoid washing for one week, otherwise the coating effect may be compromised. Below is an extended introduction: 1. Concept of ceramic coating: Ceramic coating is a hard protective layer specifically designed for key areas of a car, including the paint surface, glass, tires, wheels, seats, engine, interior, and exterior trim. The materials used in ceramic coatings are mainly divided into three categories: polysiloxane, polysilazane, and inorganic silicon. 2. Precautions: The most important point for car owners to note is that it is not recommended to wash the car within one week after ceramic coating to avoid diminishing its effectiveness. In daily car maintenance, to prolong the ceramic coating effect, it is advisable to avoid prolonged exposure to sunlight and park the car in a cool, shaded area. Additionally, regular waxing is recommended to enhance the ceramic coating's performance. With proper care, the ceramic coating effect can last up to six months or even longer.
4
2
Share

Can a Car Spare Tire Be Used as a Lifebuoy?

Car spare tires cannot be used as lifebuoys. The following is relevant information about tire pressure: 1. Introduction to tire pressure: Strictly speaking, it refers to the air pressure inside the tire. Tire pressure is closely related to the performance of the car, such as comfort and load capacity, and it also affects the lifespan of the tire. 2. Hazards of low tire pressure: Insufficient pressure increases the deformation of the tire body, easily causing cracks on the tire side and generating flexing movements, leading to excessive heat, promoting rubber aging, fatigue of the cord layer, and breakage of the cords. It also increases the tire's contact area with the ground, accelerating wear on the tire shoulders. 3. Hazards of high tire pressure: Excessive pressure causes the tire cords to undergo excessive stretching and deformation, reducing the elasticity of the tire body and increasing the load on the car while driving. If impacted, it can lead to internal cracks and blowouts. Additionally, excessive pressure accelerates wear on the tire tread and reduces puncture resistance.
5
3
Share

What is the tire pressure for the X-Trail?

The normal tire pressure range for the X-Trail is between 2.3bar and 2.5bar. If the tire pressure is too low, it will increase tire wear against the ground and raise the vehicle's fuel consumption. If the tire pressure is too high, it will increase the bumpiness of the car and reduce stability during high-speed driving. The X-Trail series is equipped with naturally aspirated engines, available in 2.0L and 2.5L displacements, paired with a CVT transmission. The X-Trail is a compact SUV produced by Dongfeng Nissan, with dimensions of 4675mm in length, 1820mm in width, and 1722mm in height, and a wheelbase of 2706mm. It inherits Nissan SUV's consistent styling, featuring bold lines and a front face almost identical to the Patrol, especially the radiator grille, which shares the same design lineage, giving the entire vehicle a very handsome appearance.
18
1
Share

What Causes Hard Air Brakes?

Air brakes becoming hard is due to a malfunction in the gas booster system of the master cylinder. Below is an introduction to air brakes: 1. Introduction: Air brakes are a type of braking system. In automobiles, a series of specialized devices that apply a certain force (primarily on the wheels) from the external environment (mainly the road surface) to enforce a certain degree of braking are collectively referred to as the braking system. Automotive braking systems can be categorized based on their functions into service brakes (air brakes), parking brakes, emergency brakes, and auxiliary brakes. Parking brakes can further be divided into central disc brakes and spring brake actuators, with the latter commonly known as "spring brakes." 2. Composition: A standard air brake system consists of a brake control mechanism, dual-circuit brake mechanism, central disc brake mechanism, brake assembly, air compressor, etc. The brake control mechanism includes components such as the brake pedal and pedal suspension; the dual-circuit brake mechanism includes the air reservoir, brake valve, low-pressure alarm, pressure regulator, brake lines, directional valve, relay valve, safety valve, and drain valve; the central disc brake mechanism includes the parking brake control handle, brake cables, and central disc brake assembly.
3
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.