How to adjust the rearview mirror of a Corolla?
4 Answers
To adjust the rearview mirror of a Corolla, follow these steps: 1. The prerequisite for adjusting the rearview mirror is to first adjust the height and front-rear position of the seat. 2. The vertical adjustment of the rearview mirror should be set so that the sky and ground each occupy half of the mirror's surface. Horizontally, the mirror should be adjusted so that the car body occupies about one-quarter of the mirror's area, allowing visibility of the rear door handle. The Corolla is a compact sedan produced by FAW Toyota, equipped with a 1.2T turbocharged engine delivering a maximum power of 116KW and a peak torque of 185NM. It features a MacPherson strut front suspension and an E-type multi-link independent rear suspension. The car's dimensions are 4635mm in length, 1780mm in width, and 1455mm in height, with a wheelbase of 2700mm.
When I first bought my Corolla, it took me a while to figure out the rearview mirror adjustment, but it's actually quite simple. There's a control panel below the driver's side door handle marked with "L" and "R". You press to select the left or right mirror, then manually adjust the mirror angle up, down, left, or right using the joystick. When adjusting, make sure you can see the road behind the car and the edge of a tire in the mirror to reduce blind spots when changing lanes. I prefer to do this while parked in a parking lot, with the car running but not moving, sitting upright in the driver's seat for accurate adjustment. Remember not to set the angle too high, or you might miss close objects. The electric adjustment in the Corolla is quite convenient, and my model even has a heating function—just turn it on in winter to melt frost and maintain clear visibility. For safety, always take a quick glance at the mirror positions before driving to ensure they're properly set.
As a car owner, I've summarized a routine for adjusting the Corolla's rearview mirrors: The control button on the inner side of the door is key. First, toggle the left/right selector switch, then use the small joystick to fine-tune the mirror angle. The main focus is to cover the rear view—for example, you'll know it's right when you can see a bit of your car body at the mirror's edge, avoiding dangerous blind spots. I've tested this many times on highways, and accurate adjustments make lane changes much smoother. The Corolla's design is user-friendly, with responsive buttons that are also durable. It's best to adjust when the car is stationary, not while driving. A common issue is dust obscuring the mirror surface, so regular cleaning improves clarity. Though a small feature, it's super important for safe driving, especially at night when it helps you see rear lights better.
As a new Corolla driver, I find adjusting the mirrors quite user-friendly. Locate the control buttons near the door handle - first press "L" or "R" to select which mirror to adjust, then use the 4-way joystick to move it up/down/left/right. The goal is to clearly see the road behind while sitting properly in the driver's seat, with a sliver of the tire visible at the mirror's edge. I took my time adjusting in the garage, testing if the view covered blind spots. Corolla's electric system makes operation effortless - just gentle button presses. Be careful not to angle mirrors too extremely, or the rear view will distort. For safety, always check and readjust before driving.
