How to Adjust the Rearview Mirror in a Mercedes-Benz?

1 Answers
Nevaeh
07/29/25 5:03am
Adjust the interior rearview mirror so that the line of sight just passes outside the driver's right ear, making the right ear invisible. The vertical adjustment should position the horizon right in the middle of the mirror. Below are the adjustment methods for Mercedes-Benz rearview mirrors: 1. Left rearview mirror: Adjust vertically so that the sky and ground occupy the upper and lower halves of the mirror respectively. Adjust horizontally so that the car body occupies about 1/4 of the mirror area, allowing visibility of the rear door handle. 2. Right rearview mirror: Adjust vertically so that the sky occupies about 1/4 of the upper part of the mirror. Adjust horizontally so that the car body occupies about 1/4 of the mirror area, allowing visibility of the rear handle.
Was this review help?
8
2
Share
More Forum Discussions

What to Do If a Car Is Scrapped Illegally as Scrap Metal?

There are three risks associated with scrapping a car illegally as scrap metal: 1. Inability to process license plates: After the vehicle's scrapping period expires, the vehicle's records remain undeleted, occupying national license plate resources. In cities with personal license plate restrictions, it becomes impossible to process new license plates when purchasing a new car. 2. Legal liability: If the vehicle is scrapped or sold privately without proper deregistration of its information, and the license plate is stolen by another vehicle or involved in hit-and-run accidents, illegal road use, etc., the owner may face legal liabilities if unable to prove innocence when investigated by authorities, potentially leading to compensation disputes. 3. Safety hazards: Illegally scrapped vehicles may be dismantled by unauthorized entities for parts resale or use, leading to old car parts entering the market and posing significant safety risks. Therefore, it is essential to follow regulations and complete the vehicle scrapping procedures promptly to avoid unnecessary troubles.
20
5
Share

What are the components of an electronically controlled automatic transmission?

An electronically controlled automatic transmission mainly consists of a torque converter, planetary gear transmission system, shift actuator, hydraulic control system, electronic control system, cooling device, etc. Among them, the torque converter is an important component of the hydraulic automatic transmission, installed on the engine's flywheel. Here are the extended details: 1. The torque converter increases the engine's output torque and transmits it to the planetary gear system, enabling continuously variable transmission within a certain range. 2. The gear transmission system achieves the ultimate goal of changing the transmission ratio and direction. 3. The shift actuator drives the planetary gear mechanism to work, forming a new power transmission path, which is the so-called "shifting." 4. The hydraulic control system uses solenoid valves to control the action of the shift valve based on the driver's intention and changes in driving conditions to achieve the shifting process. 5. The electronic control system mainly determines the gear and shift points based on signals from the vehicle speed sensor and throttle position sensor, outputs shift commands, and generates hydraulic signals through solenoid valves to control the action of the shift valve, realizing the automatic shifting process. 6. The cooling device maintains the oil temperature within the range of 80°C to 90°C.
7
3
Share

What brand is landgema tire?

landgema tire is a niche brand that is rarely seen in the market. The tire models and types are as follows: Tire Introduction: The sidewall thickness of the tire is 5mm. Car tires can be divided into pneumatic tires and solid tires based on the structure of the tire body. The vast majority of modern cars use pneumatic tires. According to the air pressure inside the tire, pneumatic tires can be divided into three types: high-pressure tires, low-pressure tires, and ultra-low-pressure tires. Tire Types: Low-pressure tires are commonly used in various types of vehicles. Pneumatic tires can be further divided into tube tires and tubeless tires based on their structural composition. Tubeless tires are commonly used in passenger cars. Depending on the arrangement of the internal cord ply and buffer layer, tires can also be classified into radial tires and bias tires. Radial tires are widely used in vehicles. These specifications are usually marked on the side of the tire.
7
0
Share

Does Idling for 12 Hours Damage the Car?

Idling a car for twenty minutes can cause certain damages to the vehicle. Below are the related impacts of idling on a car: 1. Main damages: The primary damage is that prolonged or frequent idling can lead to carbon buildup inside the engine cylinders and affect the throttle. When carbon deposits accumulate to a certain extent, they can reduce the car's power performance and, over time, easily cause engine wear. During idling, the vehicle does not perform external work. In an idling state, the engine only overcomes its own resistance, so it is advisable to turn off the engine during prolonged waits. 2. Fuel consumption: Extended idling increases fuel consumption, with a significant portion of fuel usage during vehicle operation attributed to idling. For a 1.5-liter displacement vehicle, idling for one hour consumes approximately 1-1.5 liters of fuel on average. For engines above 2.0 liters, the average fuel consumption during one hour of idling ranges from 1.5 to 2.3 liters. Additionally, prolonged idling contributes significantly to air pollution, making it advisable to avoid extended idling periods.
17
4
Share

Is it a traffic violation if the trunk cannot be closed due to loaded items?

It is considered a traffic violation if the trunk cannot be closed due to loaded items. Below are the relevant details: 1. Why an unclosed trunk is a violation: An unclosed trunk may pose a risk of items falling out, potentially causing road obstacles and endangering following vehicles. Typically, offenders will receive a warning, but if large or hazardous items are involved, penalties such as fines and demerit points may apply. 2. What constitutes a traffic violation: Traffic violations include any actions by vehicles or pedestrians that contravene traffic management regulations, unauthorized occupation of roads by organizations or individuals for activities like setting up stalls, parking, constructing shelters, or conducting market trade, as well as speeding, drunk driving, and running red lights. For the safety of yourself and others, always adhere to traffic rules.
7
3
Share

What is the icon for the main and auxiliary fuel tank switch on a motorcycle?

The main fuel tank on a motorcycle's fuel switch is indicated by the letter ON or a full cup icon, while the auxiliary tank is represented by the letter RES or a half-cup graphic. OFF or a dot signifies the switch is closed. There is an arrow on the fuel switch handle; turning the handle to align the arrow with a specific mark indicates which function (main tank or auxiliary tank) is in use. Additional information: Below are some precautions for refueling a motorcycle: 1. Avoid refueling during midday in summer when the sun is intense and temperatures are high, as gasoline is charged by volume rather than weight, and it expands with heat and contracts with cold. 2. Refueling in the morning or evening allows for more mass per volume of gasoline, saving a significant amount. 3. Underground storage tanks at gas stations have the lowest temperatures only between 5:00 AM to 8:00 AM (summer) or 5:00 AM to 9:30 AM (spring, autumn, winter). This is the most appropriate time to refuel, but avoid peak hours during this period. Even if there are vehicles ahead waiting to refuel, operating two machines or two fuel nozzles simultaneously can easily stir up impurities from the bottom of the tank.
15
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.