How to Adjust the Rearview Mirror Buttons?
2 Answers
Here are the steps to adjust the rearview mirror buttons: 1. Press the L button to tilt the rearview mirror lens to the left. 2. Similarly, press the R button to tilt the rearview mirror lens to the right. 3. Adjust the left and right direction buttons until the vehicle body is visible in the rearview mirror. 4. Press the up and down direction buttons continuously to adjust the vertical angle of the mirror until the road occupies half of the mirror. Introduction to the rearview mirror adjustment buttons: Located on the left side of the steering wheel, find the rearview mirror adjustment buttons. L stands for the left rearview mirror, R stands for the right rearview mirror, and the four arrows (up, down, left, right) represent the four adjustment directions.
Adjusting the side mirror buttons is actually a pretty routine operation, and I've developed the habit myself when driving. After getting in the car, don't rush to drive off. First, park the car in a safe spot and shift to P gear before adjusting the mirrors with peace of mind. Locate the control button on the driver's side door panel—it's usually a circular joystick with L and R markings, representing the left and right mirrors. Press the L button to select the left mirror, then gently push the joystick to adjust the direction: push up to tilt the mirror and see the skyline, push down to lower it for better road visibility, and push left or right to change the viewing range. While adjusting, keep glancing at the mirror to ensure the blind spots are covered. Repeat the same steps for the right mirror. Sometimes, if the button feels sticky or responds slowly, I wait a moment or try restarting the car to avoid damaging internal components, especially on bumpy roads. Remember not to fiddle with it while driving—safety first. Regularly cleaning dust off the buttons can also extend their lifespan.