How to Adjust the Radio in BMW 730?

1 Answers
LaWyatt
07/30/25 4:21am
Methods to adjust the radio in BMW 730: 1. Locate the radio. After starting the vehicle, swipe the central control screen to the right to find the radio operation interface; 2. Turn on the radio. Click the play button to activate the radio; 3. Search for channels. Click the search button located at the bottom of the screen to initiate the automatic channel search function; 4. Stop channel search. Press the stop button at the finger position to halt the radio search. The BMW 730 is a high-end luxury sedan produced by German BMW, belonging to the BMW 7 Series. In terms of body dimensions, the BMW 730 measures 5179mm in length, 1902mm in width, and 1484mm in height.
Was this review help?
8
1
Share
More Forum Discussions

How many liters of fuel can a sedan's fuel tank hold?

Different models have varying fuel tank capacities. Generally, the fuel tank volume of a family car ranges between 35-55 liters. Fuel tank volumes of other models: Mid-size sedans and mid-size SUVs typically have fuel tank volumes between 55-70 liters, while large SUVs can have fuel tank capacities of up to 100 liters. The fuel tank volume is usually the maximum fuel tank capacity announced by the automobile manufacturer. Actual fuel tank capacity: The actual capacity of the fuel tank is larger than the nominal capacity. According to fuel safety regulations, the national standard stipulates that the nominal capacity of an automobile fuel tank is 95% of the rated capacity. Therefore, when filling up, the fuel tank can hold about 10% more fuel than the nominal capacity.
7
1
Share

What is the difference between 2H, 4H, and 4L?

2H, 4H, and 4L have the following differences: 1. Different usage scenarios: Effectively utilize the four-wheel drive mode according to terrain. 2H—High-speed two-wheel (4x2) drive, used in urban areas and on good road surfaces; 4H—High-speed four-wheel (4x4) drive, used on snowy and muddy surfaces; 4L—Low-speed four-wheel (4x4) drive, used when substantial driving torque is required. 2. Different modes: 4H and 4L are two modes available on four-wheel drive vehicles. 4H is the high-speed four-wheel drive mode, while 4L is the low-speed four-wheel drive mode. These two drive modes have certain differences in controlling the transmission system.
3
1
Share

Do I Need to Collect the Inspection Exemption Label Under the New Regulations?

New regulations require the collection of the inspection exemption label. Relevant details are as follows: 1. Key Points: Vehicles eligible for the six-year exemption from inspection still need to visit the vehicle management office during this period. The regulations specify that the annual inspection label must be renewed normally, with renewals required in the second and fourth years (twice in total), and an on-site inspection is required in the sixth year. 2. Regulatory Basis: Small and micro non-operational passenger vehicles must be inspected once every 2 years within the first 6 years; after 6 years, once every year; after 15 years, once every 6 months. Motorcycles must be inspected once every 2 years within the first 4 years; after 4 years, once every year. Tractors and other motor vehicles must be inspected once every year.
7
4
Share

What is the function of the REAR button in a car?

The REAR button in a car is for the rear window defogging and defrosting function. Pressing it can remove fog from the rear windshield. Below is some related information about defogging: 1. Open windows for convection: Open a gap in both side windows to allow air convection inside the car. When the interior temperature approaches the outside temperature, the fog will dissipate. 2. Use air conditioning for defogging: Press the A/C button (A/C stands for air conditioning cooling), lower the temperature, turn on the window defogging button, and set the fan speed to maximum. This quickly reduces the temperature of the window glass by evaporating surface moisture, achieving the defogging effect. 3. Use defogging spray: The principle of defogging spray is to apply a layer on the windshield, forming an effective protective film.
19
4
Share

What are the reasons why a scooter cannot accelerate when the throttle is applied?

Reasons why a scooter cannot accelerate when the throttle is fully applied: Fuel line obstruction: Check if the fuel line is unobstructed, whether the fuel filter is clogged, the spark plug gap and carbon deposits, and the intensity of the high voltage from the ignition coil. If the voltage is weak, it may be due to a fuel line obstruction. Throttle blockage by foreign objects: After starting the engine, the idle speed may be higher when the engine is cold but normal when warmed up. If it is excessively high, first check if there is an issue with the throttle, such as blockage by foreign objects. Dirty throttle body: It could also be due to a dirty throttle body, which should be cleaned.
9
0
Share

What are the new regulations for license plate retention time?

License plate retention latest regulations are as follows: One year of use: If the vehicle has been used for one year, the original license plate can be retained for up to 1 year; the original license plate can be retained when the vehicle is transferred, deregistered, or relocated. Used cars: Both purchasing used cars and new cars are eligible for license plate retention; traffic violation records of the original vehicle must be cleared. Procedure for retaining original license plate: First complete the transfer, deregistration, or relocation of the original vehicle; apply for a new quota; when making an appointment at the vehicle management office for license plate registration, submit an application to continue using the original license plate. Notes: The retention period for the original license plate (1 year) starts from the date when the vehicle transfer or deregistration is completed. The vehicle can be bought or sold, but the license plate belongs to the original owner and cannot be transferred.
3
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.