How to Adjust the Position of Electric Seats?

How Long is the Lifespan of the Baojun CVT Transmission?

The Baojun CVT transmission has a service life of up to 300,000 kilometers. The main components of the CVT system include the driving pulley set, driven pulley set, metal belt, and hydraulic pump. This type of transmission uses the coordination between the driving and driven pulleys to transmit power, achieving optimal matching between the transmission system and engine conditions. Since the CVT transmission lacks the gear sets found in conventional automatic transmissions, gear shifts are smoother. It provides linear power output, delivering a very smooth driving experience in practice. Theoretically, a CVT can have an unlimited number of gear ratios, allowing for more flexible gear settings and easier achievement of balance between gear ratio, speed ratio, performance, fuel consumption, and exhaust emissions. However, as CVT transmissions have not been widely used in vehicles for a long time, maintenance costs are relatively high, and their torque capacity is limited.

3

1

Share

What Rear Axle is Equipped on the Hualing Hanma?

The Hualing Hanma is equipped with a Hualing assembled axle. Below are relevant details about the rear axle: 1. Introduction: The rear axle refers to the component of the vehicle's power transmission system that drives the rear wheels. It consists of two half-axles, enabling differential movement between them. It also serves as a support for the wheels and connects the rear wheels. 2. Drive Function: In front-wheel-drive vehicles, the rear axle merely acts as a tag axle, providing only load-bearing support. If the front axle is not the drive axle, then the rear axle becomes the drive axle, in which case it not only bears the load but also provides driving, deceleration, and differential functions. For four-wheel-drive vehicles, a transfer case is usually installed ahead of the rear axle. Rear axles are categorized into solid axles and independent axles. Solid axles are paired with non-independent suspensions, such as leaf spring suspensions, while independent axles are paired with independent suspensions, such as MacPherson suspensions.

8

4

Share

What are the causes of gasoline engine stalling?

The main reasons for gasoline engine stalling are: the use of low-quality fuel leading to engine carbon buildup and stalling. For new cars: it may be caused by insufficient driving skills; another possibility is problems with the car engine or fuel system. For older models, in addition to insufficient driving skills, it could be the use of substandard fuel, leading to engine carbon buildup and stalling. The following is an extended introduction: 1. Gasoline engine stalling after running for a period of time: 1) The vehicle is prone to stalling when braking and turning at high gear and low speed during driving; 2) It is prone to stalling during starting when the engine speed and vehicle speed are low; 2. Solutions: 1) During driving, when braking and turning, control the speed in time and shift to a lower gear to avoid vehicle shaking and stalling; 2) During starting, when releasing the clutch pedal, coordinate with the throttle to increase engine speed. If the clutch is released too quickly and the throttle is too small, release the clutch more slowly and press the throttle more.

18

3

Share

What is a passenger coach?

Automobile passenger coaches refer to a mode of passenger transportation that operates on fixed routes, stops at designated stations, adheres to scheduled timings, and charges fares based on the distance traveled. Below is a detailed introduction about vehicle types: 1. Overview: Vehicle type refers to a specific model of vehicle, distinguished by general characteristics, intended use, and functionality. For example, sedans, trucks, buses, trailers, and incomplete vehicles are all separate types. 2. Others: Heavy-duty vehicles have a length of 6 meters or more and a total mass of 12,000 kg or more. Medium-duty vehicles have a length of 6 meters or more and a total mass between 4,500 kg and 12,000 kg. Light-duty vehicles have a length of less than 6 meters and a total mass of less than 4,500 kg. Mini vehicles have a length of 3.5 meters or less and a load capacity of 1,800 kg or less.

19

5

Share

How Often Should the Spark Plugs of Highlander 2.0T Be Replaced?

The spark plugs of Highlander 2.0T should be replaced around 60,000 kilometers. Under normal maintenance conditions, spark plugs should be replaced after driving 40,000 to 60,000 kilometers, but it may vary depending on the brand and engine. It is recommended to follow the user manual. The following standards can be referred to for maintenance and replacement: platinum spark plugs should be replaced at 40,000 kilometers, ordinary nickel alloy spark plugs at 20,000 kilometers, and iridium spark plugs at 60,000 to 80,000 kilometers. Steps for replacing spark plugs: Open the hood, lift the plastic cover of the engine, remove the high-voltage distributor wires, and mark the position of each cylinder to avoid confusion. Use a spark plug socket to remove the spark plugs one by one. When removing them, check if there are any leaves, dust, etc., on the outside and make sure to clean them thoroughly. Place the new spark plugs into the spark plug holes, hand-tighten them a few turns, and then use the socket to tighten them. Install the removed high-voltage distributor wires according to the firing order, and then snap the cover back on.

16

2

Share

How long does it take to charge the Han DM?

The Han DM takes about three to four hours to fully charge, providing a pure electric range of 80 kilometers. Below is some related information about BYD: 1. Brand History: BYD Company Limited was founded in 1995, starting with a team of just over 20 people. By 2003, it had grown into the world's second-largest producer of rechargeable batteries and established BYD Auto in the same year. Starting as a battery manufacturer, BYD's entry into automobile production was initially seen as an 'outsider' move. However, leveraging its strong reputation for 'independent intellectual property rights' and the acquisition of Qinchuan Auto, BYD gained a first-mover advantage over other newcomers. 2. Brand Introduction: BYD Auto adheres to a development strategy of independent R&D, production, and branding, aiming to create truly affordable and high-quality vehicles for the masses. The product designs incorporate advanced international trends while aligning with the aesthetic preferences of Chinese culture.

15

1

Share

How to Adjust the Position of Electric Seats?

How Long is the Lifespan of the Baojun CVT Transmission?

What Rear Axle is Equipped on the Hualing Hanma?

What are the causes of gasoline engine stalling?

What is a passenger coach?

How Often Should the Spark Plugs of Highlander 2.0T Be Replaced?

How long does it take to charge the Han DM?

What does Corolla EX mean?

What causes the left rear wheel to cross the line during a right-angle turn?

Why is Honda's car paint so thin?

Why is there no air coming out of the Mercedes-Benz air vents?