How to Adjust the Odometer on Honda Lingpai?
2 Answers
Here are the detailed steps to adjust the odometer on Honda Lingpai: 1. You will need an odometer adjuster to make the adjustment. 2. Open the engine hood, locate the odometer sensor plug on the driveshaft, and disconnect it. 3. Insert the output plug of the odometer adjuster into the signal socket of the sensor plug, and connect the speed adjuster to the cigarette lighter. 4. Turn on all the dashboard instruments, then use the small adjustment button on the speed adjuster to set the desired speed. 5. Activate the odometer adjuster and set the required mileage. Notes on odometer adjustment: 1. The total odometer of a new car can be reset once, but only once. 2. The total mileage must not exceed 200 kilometers when resetting, otherwise, it cannot be cleared. 3. After exceeding 200 kilometers or after the total odometer has been reset once, it cannot be reset again.
I've been driving this Honda Lingpai for two years and often need to adjust the clock for daylight saving time. The operation is quite straightforward: First, turn the key to the ON position to power up the dashboard without starting the engine. Press the Menu button on the left multifunction steering wheel, and the settings menu will pop up on the display. Use the scroll wheel to find the time adjustment option, modify the numbers with the left/right buttons, and press OK to save after finishing. Besides adjusting the time, I also prefer setting the unit to kilometers to avoid mistakenly reading miles. Once, a friend tried adjusting it while driving and nearly caused an accident, so I always remind others to do it in a parking lot with the car fully stopped. During routine maintenance, I regularly clean the buttons to prevent stickiness, ensuring quicker dashboard response and longer lifespan.
