How to Adjust the Mirrors for Subject Three?

1 Answers
VanIker
07/30/25 6:22am
For the left-right position, adjust until the left edge of the rearview mirror just cuts off the right side in the mirror. For the up-down position, place the distant horizon at the center of the rearview mirror. When adjusting the up-down position, place the distant horizon in the middle, and adjust the left-right position so that the car body occupies about 1/4 of the mirror's area. When adjusting the up-down position of the right rearview mirror, it should occupy about 2/3 of the mirror's area. For the left-right position, adjust so that the car body occupies about 1/4 of the mirror's area.
Was this review help?
1
5
Share
More Forum Discussions

What is the tire model for the seventh-generation Elantra?

The seventh-generation Elantra has two tire size models: 225/45R17 and 205/55R16. The first number, 225, indicates the tire width is 225MM. The number 45 represents the tire's aspect ratio of 45%, meaning the section height is 45% of the width. The letter R stands for radial tire, and 17 indicates the rim diameter is 17 inches. The seventh-generation Elantra has a top speed of 190km/h and a fuel consumption of 5.4L per 100km. In addition to the model, tires also display the following common data: Tire cord material: Indicated by Chinese pinyin, such as M for cotton cord, R for rayon cord, N for nylon cord, G for steel cord, and ZG for steel radial cord. Speed rating: Indicates the maximum speed at which the tire can carry a specified load under defined conditions. Letters from A to Z represent certified speed ratings ranging from 4.8km/h to 300km/h. Common speed ratings include: Q: 160km/h; H: 210km/h; V: 240km/h; W: 270km/h; Y: 300km/h. Rim specification: Shows the rim size compatible with the tire for practical use, such as "Standard rim 5.00F".
16
1
Share

What is the 0-100 km/h acceleration time of the Mercedes-Benz E300L?

According to official data, the 0-100 km/h acceleration time for the Mercedes-Benz E300L 2.0T model is 7.7 seconds. Factors affecting a vehicle's 0-100 km/h acceleration time are as follows: Torque: Torque, in simple terms, indicates how much force is available. The greater the torque, the more force is available to propel the vehicle, resulting in naturally faster acceleration. The BMW 5 Series has a maximum torque of 290 Nm and a 0-100 km/h acceleration time of 7.8 seconds. The Mercedes-Benz E300L 2.0T has a torque of 320 Nm and a 0-100 km/h acceleration time of 7.7 seconds. Transmission efficiency: The transmission is the medium for transferring power and inevitably involves power loss. The higher the transmission efficiency, the better the acceleration performance. Generally, the ranking of transmission efficiency is as follows: manual transmission > dry dual-clutch transmission > wet dual-clutch transmission > AT transmission > CVT transmission. The Mercedes-Benz E300L is equipped with an automatic manual transmission. Power-to-weight ratio: The relationship between horsepower and vehicle weight is called the power-to-weight ratio (unit is Hp/T). The higher the power-to-weight ratio, the faster the acceleration. The BMW 5 Series has a power-to-weight ratio of 106 Hp/T and a 0-100 km/h acceleration time of 7.8 seconds. The Mercedes-Benz E300L has a power-to-weight ratio of 109 Hp/T and a 0-100 km/h acceleration time of 7.7 seconds.
4
2
Share

What model of tires does the 7th generation Elantra use?

The tire model for the 7th generation Elantra is 225/45/R17, and the original tire brand is Nexen Npriz-CX. Nexen Tire was founded in 1942 and successfully produced Korea's first automotive tires in 1956. Since 2012, it has been supplying original tires to global automakers, including Porsche, Volkswagen, General Motors, Skoda, Hyundai, Kia, Renault, FCA, BAIC New Energy, Suzuki, and many other global car manufacturers. For the 7th generation Elantra's tires, the following points should be noted during daily use: Regularly check the tire surface for cracks, deformations, or other defects. Due to driving wear, the tread grooves gradually become shallower. If the tread wears flat, it loses its drainage and anti-slip functions, significantly reducing the car's performance. Even small cracks can pose a risk of tire blowouts at high speeds. Additionally, promptly remove pebbles lodged in the grooves. Park on level ground whenever possible. Avoid parking on roads with thick, sharp, or pointed stones. Do not park near or in contact with petroleum products, acids, or other materials that can deteriorate rubber. After parking, the driver should avoid turning the steering wheel, as this action accelerates tire wear. Do not splash water to cool overheated tires. In hot weather or during high-speed driving, tires can overheat, and pressure may increase. In such cases, park to allow the tires to cool naturally. Never release air to reduce pressure or splash water to cool the tires, as this can cause abnormal aging of the tread rubber. Avoid sudden braking. Try to minimize frequent and hard braking to prevent accelerated tread wear caused by dragging between the tires and the road surface.
5
3
Share

What is the intake form of the SE engine?

SE engine is a turbocharged engine, which uses the exhaust gas discharged from the engine as power to drive the turbine of the turbocharger. The turbine then drives the coaxial impeller to rotate, and the impeller compresses the air sent from the air filter pipeline and then sends it into the cylinder. The main function of turbocharging is to increase the engine's air intake through the turbocharger, thereby improving the engine's output power and torque. After installing a turbocharger, the maximum power of an engine can be increased by 40% or even higher. This means that the same engine can generate greater power after being turbocharged.
1
1
Share

What Shoes Are Not Allowed for Driving License Learning?

There are no special requirements for shoes when learning to drive, but wearing slippers or high heels is not allowed. Below is relevant information about the driving license test: 1. Test Regulations: Each subject can only be tested once, and a make-up test is allowed if the initial test is failed. If the make-up test is not taken or is still failed, the current test session is terminated, and the applicant must reschedule the test. 2. Test Scheduling: Subjects 2 and 3 should be scheduled no earlier than ten days later. Within the validity period of the learning driving certificate, the number of scheduled tests for Subject 2 and Subject 3 road driving skills tests must not exceed five times.
9
3
Share

What is the equivalent of the Buick Century in today's car market?

Buick Century is equivalent to today's models like the Park Avenue and CTS. Here is an introduction to Buick cars: 1. Introduction to Buick cars: An international premium automotive brand. Owned by General Motors, adhering to the philosophy of 'Quiet Luxury, Intelligent Performance,' it integrates leading global technologies to deliver a safe, quiet, and intelligent driving experience. 2. Basic introduction to Buick cars: Buick is a mid-to-high-end brand, marketed by General Motors in the United States, Canada, and China. It is sold in North America, China, CIS countries, and the Middle East.
7
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.