How to adjust the locking sound of the Leiling car?

3 Answers
MadelineAnn
07/29/25 4:16am
The Leiling does not have a locking sound; the hazard lights will flash after locking. The 2021 Leiling is a compact car under GAC Toyota, featuring a MacPherson independent front suspension and an E-type multi-link independent rear suspension. In terms of body dimensions, the car measures 4640mm in length, 1780mm in width, and 1455mm in height, with a wheelbase of 2700mm. The transmission system is matched with a 10-speed continuously variable transmission. The Leiling has added a sports kit for the sports version, including front and rear aerodynamic bumpers, a sporty mesh piano black front grille, and exclusive sports-style seats. The gasoline sports version also adopts a low-profile body stance.
Was this review help?
19
0
Share
LeElias
08/12/25 4:16pm
I've driven a Levin for three years and tinkered with this. The new Levin models basically don't have a factory setting for lock confirmation beeps, but there's a hidden trick: holding the lock button on the key fob for over 3 seconds triggers the panic alarm. To change the default lock sound, you'll need to modify wiring and add a module, like those cheap OBD lock devices from Taobao that plug into the port under the steering wheel. Make sure to get the Toyota-specific version - after installation, you'll get a 'beep beep' sound every time you lock. I'd recommend not making the sound too loud to avoid disturbing neighbors when returning late at night. Also check the instrument cluster settings under Vehicle Customization - some higher trim models might have a chime toggle option.
Was this review help?
18
4
Share
Expand All
DeMary
10/03/25 2:25am
Last time I helped my colleague adjust her 2021 Levin Hybrid. Toyota's current eco-design defaults to only flashing lights when locking the car. To get a sound, you need to enter engineering mode: first power on without starting the engine, quickly press the start button twice. Then within five seconds, press the accelerator twice and the brake twice, and immediately after hearing a 'beep' sound, hold the lock button for 10 seconds. This method is prone to failure, so it's better to just go to the 4S shop to have the program updated. The mechanics there can enable the locking beep function in five minutes, charging around a hundred yuan. Personally, I think the light confirmation is sufficient and won't disturb the neighbors.
Was this review help?
3
2
Share
Expand All
More Forum Discussions

What is the minimum ground clearance of the Xingyue L?

The minimum ground clearance of the Xingyue L is 168mm. The minimum ground clearance of the Xingyue L refers to the distance between the lowest point (excluding the wheels) and the supporting plane, which indicates the vehicle's ability to pass over obstacles such as rocks and tree stumps without collision. A higher ground clearance of the Xingyue L improves its off-road capability, but if the ground clearance is too high, the stability at high speeds may decrease. The Xingyue L is a compact SUV under Geely Auto. The length, width, and height of the Xingyue L are 4770mm, 1895mm, and 1689mm respectively, with a wheelbase of 2845mm. Generally, the ground clearance of sedans ranges between 110mm and 150mm, while SUVs have a ground clearance between 200mm and 250mm. However, the ground clearance of the Xingyue L is not static; it also depends on the load condition. Therefore, changes in ground clearance should be considered based on the Xingyue L's load variations. When selecting a vehicle, ground clearance can be one of the reference factors. The choice should depend on the vehicle's intended use and road conditions. For urban areas with well-paved roads, a vehicle with lower ground clearance can enhance stability and comfort. If the vehicle will frequently travel to remote areas or regions with poor road conditions, a higher ground clearance may be preferred to avoid damage to the undercarriage.
6
2
Share

Why does the ESP light come on with a camshaft position fault in the Sagitar 1.6?

ESP light coming on does not necessarily indicate a fault. You can first clear the fault code and then start the engine to see if the light comes on again. If it does, the possible reasons are as follows: 1. Sensor failure: such as wheel speed sensor, steering sensor, side slip sensor, lateral acceleration sensor, etc. 2. Line failure: failure in the circuit between ESP and the sensor or actuator. The resistance or continuity can be measured to check for faults. 3. Actuator failure: refers to faults in the four braking systems. Below is an introduction to related content: ESP: ESP is an electronic stability system. Generally, in addition to ABS, some cars are also equipped with ESP, which is an important component of the auxiliary braking system. Especially when driving on snowy roads, ESP can make braking safer.
20
4
Share

What is the reason for the failure of the Geely Emgrand steering wheel locking system to unlock?

Currently, there are two main reasons for this malfunction: one is a failure of the vehicle's ACC relay itself; the other is the owner installing additional electrical equipment such as a dashcam by drawing power from the vehicle's fuse box, causing the system to falsely report an error. Below is more information about the Geely Emgrand: 1. Steering wheel locking system unlocking method: Due to non-standard practices in many domestic car modification shops, installing electrical equipment like dashcams by drawing power from the vehicle's fuse box can cause false error reports in the original circuit system. Simply removing the power-drawing wire from the fuse box can restore normal function. If the error persists after restoring the vehicle's circuit, a relay failure may be suspected, and it is recommended to visit a 4S shop or repair facility as soon as possible. 2. Brand features: Geely Emgrand (referred to as Emgrand) is a sub-brand under the Geely parent brand. The new Geely Emgrand was launched on July 26, 2014, equipped with a 1.3T GeTec DVVT turbocharged engine, featuring front-wheel drive, a maximum power of 98kw, turbo engagement at 1800 rpm, and a peak torque output of 185 NM at 2000 rpm. 3. Brand characteristics: Emgrand advocates 'Excellence, Stability, and Prestige' as its brand proposition, representing Geely Auto's development direction of safety, energy efficiency, and environmental protection, both inheriting and breaking through for Geely Auto.
20
3
Share

Symptoms of Oxygen Sensor Failure?

Once the oxygen sensor fails, the computer of the electronic fuel injection system will not be able to obtain information about the oxygen concentration in the exhaust pipe, thus failing to perform feedback control on the air-fuel ratio. This will lead to increased engine fuel consumption and exhaust pollution, as well as engine issues such as unstable idling, misfiring, and surging. Typically, there are two oxygen sensors, described as follows: 1. Front Oxygen Sensor: The front oxygen sensor is used to adjust the mixture concentration, while the rear oxygen sensor monitors the working condition of the three-way catalytic converter. Failure of the front oxygen sensor will result in the inability to correct the mixture, leading to increased vehicle fuel consumption and reduced power. 2. Rear Oxygen Sensor: Failure of the rear oxygen sensor means the working condition of the three-way catalytic converter cannot be determined. If the three-way catalytic converter fails, timely maintenance will not be possible, ultimately affecting the engine's operating condition.
2
5
Share

What does the SJ oil grade mean?

Oil grade SJ refers to mineral oil. Below is the classification method for oil grades: 1. AB series: Gasoline and light-duty diesel engine oils. 2. C series: Catalyst-compatible engine oils. 3. E series: Heavy-duty diesel engine oils. Here is extended information about the functions of automotive engine oil: 1. Reduces wear: Separates the surfaces of relatively sliding components to minimize wear. 2. Cools the engine: Carries heat back to the oil pan and dissipates it into the air, assisting the radiator in cooling the engine. 3. Flushes contaminants: Circulates carbon deposits, sludge, and wear particles from engine components back to the oil pan, using the flow of lubricating oil to flush away dirt generated on the working surfaces of the parts.
4
2
Share

What does an automotive torque converter mean?

An automotive torque converter refers to a hydraulic component composed of a pump impeller, turbine, and guide wheel. The following are the functions of a torque converter: 1. Improve passing ability: The torque converter can automatically adjust the turbine speed according to load changes, enhancing the vehicle's passing capability. 2. Extend system lifespan: By hydraulically connecting the pump impeller and turbine, the torque converter reduces the impact load of the engine on the transmission system, thereby prolonging the transmission system's lifespan. 3. Enhance dynamic performance: During startup, the torque converter can increase the vehicle's starting torque ratio, thereby improving its dynamic performance. 4. Improve comfort: It ensures smooth and gentle starts, enhancing ride comfort.
16
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.