How to adjust the locking sound of the 2021 Lavida?

What is the cause of rail pressure fault 523613-2?

Rail pressure fault 523613-2 is a fault code reported when the fuel quantity used by the metering unit to compensate for leakage exceeds the set range. The following are the causes of this fault: 1. Excessive return oil: Excessive return oil from the injector causes high-pressure leakage, which leads to the flow rate in the metering unit exceeding the upper limit. 2. Wear of the pressure relief valve seat surface: Wear of the pressure relief valve seat surface on the fuel rail causes high-pressure leakage, which leads to the flow rate in the metering unit exceeding the upper limit. 3. Improper assembly of the high-pressure push rod: For four-valve injectors with a split high-pressure push rod, improper assembly of the high-pressure push rod can also cause excessive leakage and report this fault. 4. Blockage of the oil inlet hole: If the injector nozzle seat surface is stuck or the oil inlet hole on the side of the valve seat is blocked by particles, it will cause continuous injection, and this fault will also be reported.

9

1

Share

What Precautions Should Be Taken When Installing Spark Plugs?

Precautions for replacing spark plugs are as follows: 1. It is best to replace them when the engine is cold. 2. When removing, pull from the base of the high-voltage wire, not directly from the wire itself, to avoid breaking the inner core. Also, mark the positions of each cylinder's high-voltage wires before removal to avoid confusion. 3. Before installing the spark plug, ensure that the new spark plug matches the engine of the vehicle being serviced. Extension: The material of the spark plug has a decisive impact on its replacement interval. The mainstream spark plugs on the market include copper core, nickel alloy core, platinum core, and iridium core. Copper core spark plugs are recommended to be replaced every 20,000–30,000 kilometers. Nickel alloy spark plugs have a slightly longer replacement interval, around 40,000–60,000 kilometers. Iridium and platinum core spark plugs have more stable metal properties and better oxidation resistance, resulting in a much longer service life. Platinum core spark plugs are recommended to be replaced every 80,000 kilometers, and iridium core spark plugs every 100,000 kilometers.

18

5

Share

What is the normal negative pressure for the EA888 engine?

The normal negative pressure for the EA888 engine is around 1200-1300KPa. Here are the specific details about the EA888 engine: 1. Power Configuration: The EA888 series engines include two displacements: 1.8L and 2.0L. The 1.8TSI has a maximum power of 118kw and a maximum torque of 250Nm; the 2.0TSI can reach a maximum power of 147kw and a maximum torque of 280Nm. 2. Working Principle: The working principle mainly involves controlling the hydraulic oil in the corresponding pipelines through the camshaft adjustment valve to drive the blades in the adjuster, thereby rotating the camshaft to advance or delay the opening and closing of the valves. 3. Direct Injection System: The fuel pump of the EA888 engine is a structurally simple single-plunger pump, driven by a square (four-point) cam on the intake camshaft. The four-point cam synchronizes the fuel supply stroke of the pump with the corresponding injection process of each cylinder, ensuring better uniformity and repeatability of fuel injection across all cylinders.

3

2

Share

What is the difference between Energy XM2 and XM2+?

The difference between Energy XM2 and XM2+ lies in the fact that XM2+ is the next-generation product of XM2. Below is an introduction to their differences: 1. Wear resistance: As an enhanced version, XM2+ not only maintains the consistent characteristics of the Energy series, such as a strong and sturdy tire body and short braking distance, but also further enhances the wear resistance of the Energy series, helping to reduce the wear rate and achieve ultra-long mileage. 2. Braking distance: The braking distance of XM2+ is shorter than that of XM2. According to the wet braking test conducted by the China Automotive Technology and Research Center, the average braking distance of new XM2+ tires is 9.80% shorter than that of XM2. 3. Technology: XM2+ adopts the new IronFlex technology, with the tire skeleton made of high-strength cord fabric, making the tire more robust and improving its damage resistance. The optimized tire body structure allows the tire sidewall to quickly disperse pressure when subjected to unexpected stress, ensuring the tire's toughness and enhancing its damage resistance.

5

2

Share

Why Does the Car Body Shake When Shifting from D to R?

Engine idle speed issue. Solutions: 1. When starting a cold engine: Allow the car to idle for one and a half minutes to give it a warm-up period. At the initial start, the internal temperature of the engine does not reach the normal operating temperature—the normal temperature is indicated when the water temperature gauge reaches 90 degrees. The car may shake, the engine noise may be loud, and the tachometer may be slightly higher—normal values range from 600 to 900 RPM. Starting under such conditions can easily lead to carbon buildup in the engine because combustion is incomplete at low temperatures. 2. Avoid lugging the engine while driving: When the engine starts to shake, downshift promptly. Lugging the engine can cause excessive pressure, insufficient power, incomplete combustion of gasoline, and carbon buildup in the injectors, affecting the engine's lifespan. 3. Protect the undercarriage: The undercarriage is the part of the car closest to the ground and is highly susceptible to damage from road objects. Therefore, regularly inspect the undercarriage to prevent excessive damage from foreign objects.

14

1

Share

Where is the license plate number Wan C from?

Wan C is the license plate code for Bengbu City, Anhui Province, where 'Wan' is the Chinese character abbreviation for Anhui Province. The license plate codes for other regions in Anhui Province are: Wan A for Hefei City, Wan B for Wuhu City, Wan C for Bengbu City, Wan D for Huainan City, Wan E for Ma'anshan City, Wan F for Huaibei City, Wan G for Tongling City, Wan H for Anqing City, Wan J for Huangshan City, Wan K for Fuyang City, Wan L for Suzhou City, Wan M for Chuzhou City, Wan N for Lu'an City, Wan P for Xuancheng City, and Wan Q for Chaohu City. License plates, also known as vehicle registration plates, are plates attached to the front and rear of a vehicle, made of materials such as aluminum, sheet iron, plastic, or paper. Their primary function is to identify the vehicle's region of registration, allowing authorities to trace the vehicle's owner and registration details based on the license plate.

2

Share

How to adjust the locking sound of the 2021 Lavida?

What is the cause of rail pressure fault 523613-2?

What Precautions Should Be Taken When Installing Spark Plugs?

What is the normal negative pressure for the EA888 engine?

What is the difference between Energy XM2 and XM2+?

Why Does the Car Body Shake When Shifting from D to R?

Where is the license plate number Wan C from?

Does Using Car Engine Oil Affect Motorcycles?

Can the original owner deregister a used car if the ownership is not transferred?

Is 97 octane gasoline now 98 octane?

Does the Sagitar have a keyhole for one-button start?