How to Adjust the Lights on Baojun 510?

1 Answers
Kieran
07/29/25 8:45am
The method to adjust the lights on Baojun 510 is as follows: 1. The vehicle's light adjustment controls are located on the left side behind the steering wheel and on the left side of the center console. 2. Turn the knob to the "OFF" position to turn off the headlights. 3. Turn the knob to the next position for the parking light setting. 4. Continue turning the knob to the next position for the low beam setting. 5. Turn the inner knob to the "ON" position for the front fog light setting. More information about Baojun 510: 1. Baojun 510 is equipped with a General 1.5L engine featuring variable valve timing technology for intake and exhaust and VIM variable intake manifold technology, with a maximum power of 112 horsepower and peak torque of 147N·m. 2. Baojun 510 comes with leather seats, electric driver's seat adjustment, automatic air conditioning, keyless entry/start, rearview camera, panoramic sunroof, cruise control, tire pressure monitoring, and other configurations.
Was this review help?
9
0
Share
More Forum Discussions

What Impact Does a Faulty Oil Pressure Sensor Have on a Vehicle?

A damaged oil pressure sensor will most notably cause the oil warning light to remain constantly illuminated. Continuing to drive under conditions of excessive pressure or insufficient oil can severely affect the engine, potentially leading to complete failure. Below is relevant information about oil pressure sensors:1. The oil pressure sensor MEMS (Micro-Electromechanical-System) refers to a micro-electromechanical system that integrates micro-sensors, actuators, signal processing and control circuits, interface circuits, communication, and power supply into one unit.2. Method to determine the condition of an oil pressure sensor: If short-circuiting shows normal readings, it indicates the sensor is a normally open switch output type. If there is oil in the engine but the sensor still shows no output, it signifies the sensor is damaged.
14
0
Share

Why is the steering wheel not locked but unable to turn?

If the steering wheel is not locked but cannot be turned, it is most likely due to the activation of the automatic steering wheel lock function. The solutions are as follows: 1. First, insert the key, press the brake, and then turn the steering wheel left and right. Although the steering wheel is in a locked state at this time, it can still be slightly turned when attempting to steer. While turning the steering wheel, turn the key to complete the steering wheel unlocking procedure. 2. If the vehicle is equipped with a one-button start function, the operation steps are basically the same as above, with the step of inserting the key omitted. First, press the brake, then turn the steering wheel left and right, and finally press the start button to start the car.
11
4
Share

Can You Make a U-Turn at a Red Light with a Stop Line?

Whether you can make a U-turn at a red light with a stop line depends on the situation. If the U-turn does not cross the stop line of the lane and does not affect the normal driving of other vehicles, you can make a U-turn at a red light. However, if the U-turn requires crossing the stop line of a left-turn or U-turn lane, you must follow the traffic light instructions to make the U-turn. Here are the situations where U-turns are allowed: Presence of U-turn signal or sign: If there is a U-turn signal at the intersection, you can make a U-turn when the U-turn signal is green. If there is a U-turn sign or a U-turn indication on the lane, you can make a U-turn while ensuring the safety of yourself and others. No U-turn sign but left turns are allowed (no prohibition of U-turn signs): At intersections where left turns are allowed and there are no signs or markings prohibiting U-turns, you can make a U-turn. Note that the vehicle must not affect the normal driving of other vehicles and must follow the left-turn signal. If you want to make a U-turn at an intersection with a left-turn waiting area, you can first enter the waiting area when the straight signal is green and then make the U-turn when the left-turn signal turns green. U-turns allowed at dashed lines: U-turns are allowed at both white and yellow dashed lines. For double yellow lines (one solid and one dashed), check whether your side is the dashed line. If it is, you can make a U-turn safely; if it is a solid line, U-turns are not allowed. If you encounter double yellow lines at an intersection, you can make a U-turn on the dashed side, but you must not cross the stop line ahead. U-turns allowed at yellow grid lines: Parking is prohibited in yellow grid areas, but as long as there is no central barrier, you can make a U-turn here after yielding to normally moving vehicles. U-turns allowed on the dashed side of a green belt: When the front of the green belt is a dashed line, vehicles on that side can make a U-turn from there. If the front of the green belt is a solid line, vehicles must follow the traffic signal, cross the pedestrian crossing before making a U-turn, and must not cross the solid line or the pedestrian crossing to make the U-turn.
20
3
Share

What is the technique to permanently disable the auto start-stop function?

The technique to permanently disable the auto start-stop function is as follows: 1. Expose the car to direct sunlight until the displayed temperature exceeds 35°C after starting the vehicle; 2. Then open the interface for disabling the engine auto start-stop function, which should already be in the off state; 3. Next, manually press and hold the switch for disabling the engine auto start-stop function icon until the small yellow bar disappears (indicating the function is enabled), then release the switch; 4. After a few seconds, the small yellow bar will reappear, indicating the operation is complete. Even if the temperature drops later, the engine auto start-stop function will remain disabled, and it will stay off during cold starts as well.
12
5
Share

Where is the air filter of Volvo S80 located?

Volvo S80 air filter is located under the glove box on the passenger side. Steps to remove the air filter of Volvo S80: 1. Pull out the glove box on the passenger side. 2. Pull the fixed handle on the left side of the glove box outward. 3. Remove the buckle from the handle. 4. Push the glove box from both sides simultaneously to take it out. 5. After seeing the air filter, press the fixed buckle firmly to take out the air filter. Introduction to Volvo S80: 1. Volvo S80 adopts more smooth curve designs, visually expressing a sense of elegance, agility, and smooth movement. 2. Volvo S80 is a mid-to-high-end Nordic luxury sedan, equipped with comprehensive configurations, especially with full safety protection facilities. In addition to front and side airbags, there are also inflatable curtains on both sides of the upper part of the cabin.
13
3
Share

How to Replace the Sunshade of the Tiguan Sunroof?

The method for replacing the sunshade of the Tiguan sunroof is as follows: 1. Remove the inner roof frame, unroll the rolled-up sunshade, fix the small metal plate on the sunshade to the limit pin, gently push it in without deforming the metal plate, and complete the insertion. 2. You can go to a 4S shop and have professionals operate it. The Tiguan is equipped with a panoramic sunroof, and the car has a sunshade below the sunroof to avoid excessive temperature inside the car. The cleaning method for the Tiguan sunroof sunshade is as follows: 1. It can be directly removed and cleaned with water. 2. Purchase a specialized foam cleaner for cleaning, using a soft cloth during the cleaning process. 3. Go to a car shop and have professionals clean it.
1
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.