How to adjust the Jetta VS5 seat?

1 Answers
CourtneyAnn
07/29/25 10:33am
To adjust the Jetta VS5 seat, release the adjustment handle and slightly move the seat forward or backward until the seat locking mechanism engages securely. Below is relevant information about the Jetta VS5: 1. Introduction: The Jetta VS5 is a compact SUV under the FAW-Volkswagen Jetta brand. 2. Price: The manufacturer's suggested retail price ranges from 84,800 to 112,800 yuan. 3. Powertrain: It is equipped with an EA211 1.4T 110KW engine, paired with either an MQ250 manual transmission or an Aisin AQ250 six-speed automatic transmission. 4. Suspension: It features a front MacPherson independent suspension and a rear multi-link independent suspension.
Was this review help?
8
0
Share
More Forum Discussions

How to adjust the time on a 2008 Civic?

Method to adjust the time on a 2008 Dongfeng Honda Civic: 1. On the panel, there is an English word CLOCK for time. Press and hold it until the time on the screen starts flashing. 2. Use the three buttons with the letter H on the panel to adjust the time. 3. After adjustment, press the initial time button again to confirm. Below is some related information about the Honda Civic: 1. The Honda Civic is matched with two types of transmissions, a CVT continuously variable transmission and a 6-speed manual transmission. 2. The 2019 Honda Civic has a body length of 4658mm, width of 1800mm, height of 1416mm, and a wheelbase of 2700mm. 3. The 2019 Honda Civic is equipped with 1.0T and 1.5T engines, with maximum output power of 92 kilowatts and 130 kilowatts respectively. 4. The 2019 Honda Civic comes standard with driver and passenger airbags, tire pressure monitoring, ABS anti-lock braking system, brake force distribution, brake assist, traction control, vehicle stability system, engine start-stop, automatic parking, hill start assist, variable gear ratio steering, etc.
13
1
Share

How to reset the tire pressure light on Honda XRV?

1. Before resetting, ensure the tire pressure is restored to normal levels; 2. Start the vehicle; 3. Press and hold the tire pressure SET button on the center console until the tire pressure data refreshes and the warning light disappears; 4. For newer models, you can access the vehicle settings menu on the center display screen and select the tire pressure monitoring system calibration option to perform the operation. There are generally three reasons for abnormal tire pressure: Tire pressure abnormality: The system usually alerts when pressure is below 1.8 bar or above 3.0 bar. In this case, inspect the tires and adjust the pressure. Tire pressure monitoring not reset: After inflating the tires, if the tire pressure monitoring system is not reset in time, it will continue to display the previous data, causing the warning light to illuminate. Simply perform a tire pressure reset to resolve this. Damaged tire pressure sensor: The tire pressure sensor, which monitors tire pressure, is installed inside the tire and connected to the inflation valve. If the sensor is damaged during driving (e.g., by hitting a curb), the tire pressure warning light will illuminate. For sensor damage, the only solution is to replace it with a new part.
20
5
Share

How to Open the Trunk of Buick GL6?

Method to open the trunk of Buick GL6: After unlocking the vehicle, press the touchpad at the bottom of the tailgate handle above the license plate. More information about Buick GL6 is as follows: 1. The Buick GL6 is a strategic model for the Buick brand to deepen its layout in the family car market. Inheriting the dynamic and elegant design aesthetics of the Buick GL8, the GL6 emphasizes the exclusive visual symbols of Buick MPVs, creating an elegant and spacious trendsetting aesthetic design for family MPVs. The vehicle combines the sophisticated aesthetics of sedans, the flexibility and functionality of SUVs, and the comfort of MPVs. 2. The Buick GL6 features a winged chrome grille that runs through the headlight design, forming a double-layer combination of winged LED headlights, a floating roof, hidden D-pillars, and a unique streamlined window design that extends from the A-pillar to the rear, running through the tail, resulting in a smooth overall shape. 3. The Buick GL6 has a long wheelbase of 2796mm, providing ample interior space to ensure comfortable seating and storage capacity.
15
2
Share

How to Open the Fuel Tank Cap of Changan Honor?

There is a fuel tank switch lever located below the left side of the driver's seat in the Changan Honor. Pull it upward to open the fuel tank cap. Below are the relevant methods for opening the fuel tank cap: 1. When opening the fuel tank cap, the Changan Honor generally requires pulling upward, so pay attention to the force applied. Avoid using excessive force to prevent damaging the lever, as a broken lever would make it impossible to open the fuel cap, which would be very troublesome. To understand how to open a car's fuel tank cap, it's essential to first know the structure of the fuel tank cap. Nowadays, the trunk and fuel tank cap of most cars can be remotely controlled from the driver's seat, providing great convenience to the owner. However, when these functions malfunction, it often leaves the owner helpless and causes significant inconvenience. 2. Generally, the trunk is separated from the driver's cabin by the rear seats. Therefore, simply removing the rear seats allows access to the trunk from the driver's cabin. Once inside the trunk, using a screwdriver to push or rotate the movable parts on the lock can open it. If the fuel tank cap cannot be opened, starting from the trunk is a viable solution.
10
3
Share

What are the three electric components covered by the warranty of new energy vehicles?

For new energy vehicles, the three electric components covered by the warranty refer to the motor, power battery, and electronic control system. From the 30,000 yuan Wuling Hongguang MINIEV to the 7 million yuan Rimac pure electric sports car, all rely on these three electric systems. It can be said that the three electric components are the core parts of new energy vehicles. Below is a detailed introduction: Drive Motor: The motor is the power source of new energy vehicles. Based on structure and principle, motors can be divided into three types: DC drive, permanent magnet synchronous, and AC induction, each with different characteristics. Power Battery: The power battery is the energy source for the drive motor. Current power batteries are mainly distinguished by their cathode and anode materials, including lithium cobalt oxide, ternary lithium, lithium manganese oxide, and lithium iron phosphate. Ternary lithium and lithium iron phosphate batteries are more commonly used in new energy vehicles. Electronic Control System: The electronic control system is actually a general term, which can be further divided into the vehicle control system, motor control system, and battery management system. A major feature of new energy vehicles is the very close interconnection between various electronic control systems. Some vehicles even use a single electronic control system to manage all electrical equipment on the car, so it's appropriate to refer to them collectively.
9
4
Share

What is the ground clearance of the Toyota Levin?

Toyota Levin's minimum ground clearance is 105 millimeters. The minimum ground clearance of the Levin refers to the distance between the lowest point (excluding the wheels) and the supporting plane, which is used to characterize the vehicle's ability to pass over obstacles such as rocks and tree stumps without collision. The higher the Levin's ground clearance, the better its off-road capability; however, if the ground clearance is too high, the stability at high speeds will decrease. On January 4, 2021, Toyota officially launched the 2021 Levin family, which includes six pure gasoline-powered models. The Levin's dimensions are 4640 mm in length, 1780 mm in width, and 1455 mm in height, with a wheelbase of 2700 mm. Generally, the ground clearance of sedans ranges between 110 mm and 150 mm, while SUVs have a ground clearance between 200 mm and 250 mm. However, the Levin's ground clearance is not static; it also depends on the load condition. Therefore, changes in ground clearance should be considered based on the Levin's load variations. When selecting a vehicle, ground clearance can be one of the reference factors. The choice should depend on the vehicle's intended use and the road conditions. For urban areas with well-paved roads, a vehicle with lower ground clearance can enhance stability and comfort. For long-distance travel or driving in areas with poor road conditions, a vehicle with higher ground clearance may be preferable to avoid scraping or damaging the chassis.
2
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.