How to Adjust the High and Low Beams of the Passat?

1 Answers
CarmenAnn
07/25/25 8:01am
Here are the steps to adjust the high and low beams of the Passat: 1. The high/low beam adjustment lever is located on the right side of the steering wheel. 2. The lever is set to the low beam position by default. 3. Push the lever forward one position to activate the constant high beam mode, and pull it backward one position for the temporary high beam mode. 4. The "AUTO" position on the headlight adjustment is for automatic headlight control, where the vehicle will turn on the lights automatically based on external light conditions. Additional Information: 1. Inside the driver's compartment, the turn signal adjustment lever is located on the left side of the steering wheel and the left side of the dashboard. Push the entire lever upward to activate the right turn signal and downward for the left turn signal. 2. Rotate the knob to the middle dot position for the parking lights. The two fog light buttons on the left side are for the front fog light (left button) and rear fog light (right button).
Was this review help?
5
2
Share
More Forum Discussions

Can the taillights of the Hyundai Santa Fe be modified to all light up when braking?

Can the taillights of the Hyundai Santa Fe be modified to all light up when braking? The purpose is to enhance the penetration of the light source, so that vehicles behind can easily detect the braking of the vehicle ahead in low visibility conditions, preventing rear-end collisions. Taking the 2020 Hyundai Santa Fe as an example, its body dimensions are: length 4930mm, width 1910mm, height 1720mm, wheelbase 2865mm, fuel tank capacity 71l, and curb weight 1775kg. The 2020 Hyundai Santa Fe is equipped with a 2.0T turbocharged engine, with a maximum horsepower of 230PS, maximum power of 169kW, maximum torque of 353Nm, and is paired with an 8-speed automatic transmission.
10
3
Share

What is the fuel consumption of the BMW R nineT?

Urban fuel consumption is 6.2, while suburban fuel consumption is around 5.6. Here is some relevant information about vehicle fuel consumption: Introduction: An important indicator for measuring a vehicle's fuel economy. Fuel economy is typically measured by the amount of fuel consumed over a specific driving cycle or the distance a vehicle can travel with a given amount of fuel. In China and Europe, the fuel consumption per 100 kilometers (liters/100 km) is used to evaluate a vehicle's fuel economy. Impact: If a vehicle's tires are underinflated, it can affect fuel consumption. Insufficient tire pressure increases the contact area between the tires and the road, thereby increasing driving resistance, which in turn increases fuel consumption.
20
4
Share

What type of oil does the Volkswagen Eos use?

The Volkswagen Eos uses 5W30 fully synthetic oil, which functions to transfer heat back to the oil tank and then dissipate it into the air to assist the radiator in cooling the engine. Taking the 2010 Volkswagen Eos as an example, it is classified as a sports car with the following dimensions: length 4423mm, width 1791mm, height 1444mm, a wheelbase of 2578mm, a fuel tank capacity of 55 liters, and a curb weight of 1557kg. The 2010 Volkswagen Eos is equipped with a 2.0T turbocharged engine, delivering a maximum horsepower of 200PS, a maximum power of 147kW, and a maximum torque of 280Nm, paired with a 6-speed dual-clutch transmission.
19
4
Share

What kind of car is Pagani?

Pagani is a mid-engine supercar, with models such as the Huayra, Zonda, and the 2016 Dinastia Special Edition. Taking the 2016 Dinastia Special Edition Pagani as an example, its body dimensions are: length 4605mm, width 2036mm, height 1169mm, with a wheelbase of 2730mm, a fuel tank capacity of 70 liters, and a curb weight of 1350kg. The 2016 Dinastia Special Edition Pagani is equipped with a 6.0T twin-turbocharged engine, delivering a maximum horsepower of 750PS, a maximum power of 551.5kW, and a maximum torque of 1000Nm, paired with a 7-speed sequential transmission.
20
1
Share

How to Turn Off the Auto Start-Stop Function on the Chevrolet Equinox?

To turn off the auto start-stop function on the Chevrolet Equinox, follow these steps: 1. Start the car and press and hold the auto start-stop switch; 2. Press the 'set' button on the left multifunction steering wheel until you hear a beep, then stop; 3. Press the 'ok' button on the right multifunction steering wheel to complete the process. Taking the 2020 Chevrolet Equinox as an example, it is a mid-size SUV with the following dimensions: length 4646mm, width 1843mm, height 1684mm, and a wheelbase of 2725mm. The 2020 Chevrolet Equinox is equipped with a 1.5T turbocharged engine, delivering a maximum horsepower of 169PS, a maximum power of 124kW, and a maximum torque of 250Nm.
18
3
Share

Is Wearing Headphones While Driving Considered a Traffic Violation?

Wearing headphones while driving is not considered a traffic violation. The hazards of making phone calls while driving are as follows: It distracts the driver's attention: Driving requires the driver's full attention. Using a mobile phone distracts the driver's attention, and holding the steering wheel with one hand can easily lead to traffic accidents. It diverts the driver's line of sight: Whether using a handheld or hands-free mobile phone while driving, it reduces the number of times the driver shifts their line of sight and prolongs the time of each shift. This makes it difficult for the driver to promptly notice changes in road conditions, increasing the likelihood of traffic accidents when unexpected situations arise.
8
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.