How to Adjust the Height Standard of Car High and Low Beams?

What is the real fuel consumption of the Polo 1.6 automatic transmission?

The average fuel consumption of the Polo 1.6 automatic transmission is 6.3-7.7L/100km. However, since fuel consumption is related to multiple factors, the actual fuel consumption should be based on real-world usage. The factors affecting fuel consumption are as follows: 1. Rough roads consume more fuel: Poor road conditions or uneven surfaces force the vehicle to drive in low gears for extended periods, inevitably increasing fuel consumption; 2. Using the trunk as storage increases fuel consumption: Loading the trunk with unnecessary items adds weight to the car. It's important to note that vehicle weight is directly proportional to fuel consumption. A 10% reduction in weight can lead to a corresponding percentage drop in fuel consumption; 3. Incorrect driving habits can double or triple fuel consumption: Poor driving habits have the most significant impact on fuel consumption. During driving, especially in heavy traffic, at red lights, or when changing lanes, sudden acceleration and hard braking are the most common issues.

13

0

Share

What does the yellow exclamation mark on the Sylphy dashboard mean?

The yellow exclamation mark on the Sylphy dashboard may be caused by poor gasoline quality, insufficient tire pressure, or automatic transmission failure. Poor gasoline quality: This usually occurs when low-quality gasoline is filled at non-standard gas stations, leading to incomplete combustion of the air-fuel mixture during engine operation and triggering the engine fault light. While this does not affect driving safety, it may cause some degree of harm to the engine. The solution is to choose high-quality fuel. Insufficient tire pressure: When the tire pressure monitoring system detects insufficient pressure in any tire, a yellow exclamation mark will appear on the dashboard. The solution is to promptly replenish the tire pressure and, if necessary, visit a 4S store for relevant inspections. Automatic transmission failure: When there is a transmission issue, a yellow exclamation mark will also appear on the dashboard. This is typically due to transmission faults, transmission lubricant levels below the normal range, or the need for lubricant replacement. In such cases, it is advisable not to continue driving and to promptly visit a professional repair shop for inspection.

10

5

Share

How long does it take to fully charge a dead car battery by driving?

It takes about 3 to 4 hours of driving to fully charge a dead car battery. The functions of a car battery are: 1. Providing power to the starting system, ignition system, and electronic fuel injection system when starting the engine; 2. Supplying power to the car's electrical equipment when the engine is off or idling at low speed; 3. Assisting in powering electrical devices when the generator's output is insufficient; 4. Mitigating voltage surges in the electrical system to protect the car's electronic equipment; 5. Storing excess electricity generated by the alternator. Methods for maintaining the battery include: 1. Starting the car regularly to charge the battery; 2. Adding distilled water or a special replenishing fluid when the electrolyte level is low; 3. Frequently checking the ventilation holes on the battery cover during daily driving; 4. Inspecting the battery's positive and negative terminals for signs of oxidation; 5. Checking all parts of the circuit for aging or short circuits; 6. Turning off all electrical devices when leaving the car.

13

2

Share

Where is the horn wire located in the Sylphy?

The horn wire in the Sylphy is located under the steering wheel airbag. It is recommended to have it repaired by a professional, as the clock spring under the steering wheel is prone to breaking, avoiding unnecessary risks. The brown wire is the horn wire, usually connected to the horn in an up-down configuration—do not cross them, otherwise it may burn out the audio amplifier. Typically, there are four positions: front left, front right, rear left, and rear right. You can use the ohmmeter setting on a multimeter to distinguish them; momentary power will produce a buzzing sound, helping to identify the positions of the four horns. The main reasons for a car horn not working or sounding hoarse include insufficient battery charge, damaged horn relay and button, or a faulty horn. To check the power system, turn on the headlight switch. If the headlights do not light up or appear dim, start the engine and slightly increase the throttle. If the headlights then function normally and the horn sounds, the issue is likely insufficient battery charge.

2

0

Share

Why does the white color of the Sylphy turn yellowish?

This is because the manufacturer's paint formulation includes other color mixtures, resulting in a pearl white shade that inherently has a yellowish tint. Below are specific details about the Sylphy: 1. Body Dimensions: The Sylphy is a sedan series launched by Dongfeng Nissan Passenger Vehicle Company in 1959. The vehicle measures 4641mm in length, 1815mm in width, and 1447mm in height, with a wheelbase of 2712mm. It features front-engine, front-wheel-drive layout, a fuel tank capacity of 47L, and standard seating for five. 2. Powertrain Configuration: Equipped with a 1.6 HR16DE engine, it incorporates an all-aluminum cylinder block, true round machining process (F1 engine technology), reverse intake and exhaust layout, ultra-thin silent timing chain, CVTV continuously variable timing valve, double overhead camshaft, 16V, and platinum spark plugs. Maximum power output is 80KW, with a peak torque of 153NM.

2

Share

How often should the spark plugs be replaced in a BMW 3 Series B48?

BMW 3 Series spark plug replacement interval: Under normal maintenance conditions, replacement is recommended every 40,000 to 60,000 kilometers. However, this may vary depending on the brand and engine type, so it's advisable to follow the owner's manual. You can refer to the following maintenance standards for replacement: Platinum spark plugs should be replaced at 40,000 km, ordinary nickel alloy spark plugs at 20,000 km, and iridium spark plugs at 60,000-80,000 km. How spark plugs work: The spark plug's ground electrode is connected to the metal shell, which is threaded into the engine block via the cylinder head. The insulator primarily serves to isolate the metal shell from the center electrode. The terminal nut is the part of the spark plug that contacts the ignition coil. When current passes through the terminal nut and center electrode, it ionizes the medium between the center electrode and ground electrode to create a spark, thereby igniting the air-fuel mixture in the cylinder.

12

4

Share

How to Adjust the Height Standard of Car High and Low Beams?

What is the real fuel consumption of the Polo 1.6 automatic transmission?

What does the yellow exclamation mark on the Sylphy dashboard mean?

How long does it take to fully charge a dead car battery by driving?

Where is the horn wire located in the Sylphy?

Why does the white color of the Sylphy turn yellowish?

How often should the spark plugs be replaced in a BMW 3 Series B48?

Should I use S gear or D gear on the highway?

What are the differences between the 2013 Magotan and the 2015 Magotan?

What is the appropriate RPM for vehicle startup?

Does the 2021 Corolla come with a manual transmission?