How to Adjust the Headlights on the Envision?

3 Answers
JuniperMarie
07/24/25 10:36pm
Method for adjusting the headlights on the Envision: There is a circular headlight adjustment button below the left side of the steering wheel. Rotate it clockwise to the AUTO mode, and the headlight height will be automatically adjusted. Adjustable headlight height refers to adjusting the height of the headlights to obtain an optimal illumination distance, thereby avoiding potential hazards. This is a safety feature in vehicle lighting. The Envision is a midsize SUV that continues Buick's consistent high-quality interior standards and introduces a newly designed 10-inch HD touchscreen to enhance the technological feel. The vehicle also features front-row multifunctional seats, rear-row sliding seats with adjustable backrest angles, a large split-center storage box, a heated steering wheel, and a two-piece oversized panoramic sunroof.
Was this review help?
3
3
Share
LeAmir
08/10/25 3:03pm
A few days ago, I just adjusted the headlights of my Envision, and the operation was quite simple. All you need to do is sit in the driver's seat and locate the instrument panel on the left side of the steering wheel, where there's a headlight height adjustment knob, usually marked with a scale from 0 to 5. Turning it to 0 sets the lowest angle, suitable for city roads, while turning it to 5 is for mountainous areas. After starting the vehicle and turning on the headlights, adjust the knob while stepping out to observe if the light beams are level—avoid setting them too high to prevent blinding oncoming traffic or too low to ensure proper road visibility. I’ve used this method a few times, and it once helped me avoid a near rear-end collision. Nighttime safety is crucial. If manual adjustment doesn’t work, it might be a motor issue, requiring a visit to the repair shop. Don’t skip this step—check before every long trip to minimize risks. Remember, safety comes first, and properly adjusted headlights make driving much more comfortable.
Was this review help?
16
3
Share
Expand All
StLeah
08/10/25 3:04pm
As a seasoned driver, I place great importance on the impact of light adjustment on driving safety. The headlights of the Envision can usually be adjusted via the knob inside the car, located either at the lower left of the dashboard or behind the steering wheel. I recommend first consulting the manual to confirm, then gently turning the knob with the lights on to ensure the beam illuminates the ground at a distance of about 50 meters—not too high to avoid glare. I've seen people who didn't take it seriously end up in accidents at night due to being blinded by lights, which really isn't worth it. If the lights still aren't bright or the angle is off, it might be a burnt-out bulb or aging wiring, so get it checked as soon as possible. Develop a habit of regular maintenance, checking it yourself monthly to ensure clear visibility in rain or fog. Good lighting is your lifeline when driving at night—don't slack off.
Was this review help?
6
1
Share
Expand All
More Forum Discussions

What are the body dimensions of the CR-V?

The length, width, and height of the currently available Honda CR-V models are 4585mm, 1855mm, and 1679mm respectively, with a wheelbase of 2660mm. Below is an introduction to the Honda CR-V: 1. The currently available Honda CR-V models adopt a front-engine, four-wheel-drive layout, with the four-wheel-drive system being an on-demand type and the central differential utilizing a multi-plate clutch. 2. The CR-V employs Honda's family-style design language, with its front fascia drawing inspiration from the design concept of the new-generation Civic. The new model features a wider chrome grille trim, more pronounced three-dimensionality and muscularity in the fenders, and a lower air intake. Additionally, the new model is equipped with LED headlights and L-shaped taillight clusters. Moreover, the body dimensions of the Honda CR-V have been increased, offering more interior space, with both five-seat and seven-seat versions available. 3. The new CR-V boasts a more youthful design compared to the current model, with numerous youthful elements visible at both the front and rear. This reflects Honda's current design trend and aligns with the overall direction of the automotive industry. The side profile of the vehicle does not differ significantly from the current model, but the increased height of the engine hood gives the new model a more sporty appearance, while the prominent front and rear wheel arches enhance its muscular appeal.
6
0
Share

Is the Toyota Camry Front-Wheel Drive or Rear-Wheel Drive?

Camry adopts front-engine, front-wheel drive. The eighth-generation Camry is equipped with a new 2.5L Dynamic Force Engine. The new 2.5L Dynamic Force Engine has a maximum output power of 154kw and a maximum torque of 250Nm. Introduction to the Camry: 1. Body dimensions: length 4885mm, width 1840mm, height 1455mm, wheelbase 2825mm. 2. Suspension: the front suspension uses MacPherson strut independent suspension, and the rear suspension is an E-type multi-link independent suspension.
2
3
Share

Will the car air conditioning vent be damaged if water enters?

A small amount of water entering the car air conditioning vent will not cause damage. The reason is that water entering from the air conditioning intake can be discharged through the air conditioning drain and will not remain inside the car air conditioning system. Here is more information about car air conditioning: 1. When designing air conditioning systems, manufacturers conduct leak tests by spraying water into the intake or outlet vents to ensure that all water flows out through the drain and does not leak from the car's shell. 2. The air conditioning ventilation system effectively ensures fresh air inside the vehicle while also defogging the windshield. China has strict standards for air quality in car air conditioning, requiring a minimum of 20 cubic meters of fresh air per person per hour.
18
4
Share

How many cylinders does the MG6 engine have?

The MG6 is equipped with a four-cylinder engine. This model uses a 1.5-liter four-cylinder turbocharged engine with a maximum power output of 124 kW and a peak torque of 250 Nm. The engine reaches its maximum power at 5,500 rpm and delivers peak torque between 1,700 and 4,300 rpm. It features direct fuel injection technology and an aluminum alloy cylinder head and block. The engine is paired with either a 6-speed manual or a 7-speed dual-clutch transmission. The MG6 is positioned as a compact car, with dimensions of 4,695 mm in length, 1,848 mm in width, and 1,462 mm in height, and a wheelbase of 2,715 mm. In terms of features, the car comes equipped with keyless start, an electronic parking brake, and a vehicle stability control system, among other configurations.
16
0
Share

What Does the Second Maintenance of a Car Include?

Car second maintenance includes the following items: 1. Engine. After performing the three cleans and three filters on the engine, ensure that the engine starts easily, runs smoothly, meets exhaust emission standards, and shows no abnormal noises, water leakage, oil leakage, electrical leakage, or air leakage. 2. The free travel of the steering and the toe-in meet the requirements. The steering should be light, flexible, and free from wobbling or deviation of the front wheels during driving. 3. The free travel of the clutch meets the requirements. It should be easy to operate, completely disengage, engage smoothly, have no abnormal noises, and show no oil leakage in the hydraulic system. 4. Check whether the transmission, drive, and front half-shaft are well lubricated, reliably connected, easy to shift, and free from oil leakage. 5. Check whether the brake pedal and service brake meet the requirements, which include good braking performance, no deviation, and no oil leakage. 6. Normal tire pressure. 7. The suspension arms and shock absorbers are fixed properly, functioning normally, and the wheel hub bearings do not overheat during driving. 8. The generator, starter, lights, instruments, signal lights, buttons, switches, and auxiliary equipment are complete, intact, and functioning normally. 9. Perform a full car wash and maintenance.
10
4
Share

What engine does the Changan CS35 use?

Changan CS35 is equipped with the Blue-Core efficient H series 1.6L engine. The following is the relevant introduction about Changan CS35: 1. The CS35 is powered by the new generation Blue-Core H series efficient 1.6L engine, which has a maximum output power of 125 horsepower and a maximum torque of 160N·m. 2. Its maximum power reaches 121kW, and the maximum torque reaches 250N·m. It has three major advantages: powerful, clean, and quiet. The engine idle noise is only 38.5 decibels, which is lower than the industry average of 45 decibels.
18
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.