How to adjust the headlights of Wuling Hongguang S3?
2 Answers
The method to adjust the headlights of Wuling Hongguang S3 is: Open the engine hood, locate the two adjustment screws near the headlights—one for adjusting height and the other for adjusting left-right. The driver can adjust them according to actual needs. The dimensions of the Wuling Hongguang S3 are 4655mm in length, 1735mm in width, and 1780mm in height, with a wheelbase of 2800mm. In terms of power, the Wuling Hongguang S3 is equipped with two engines: a 1.5L and a 1.5T. The former delivers a maximum power of 82kW and a maximum torque of 146.5Nm, while the latter provides a maximum power of 110kW and a maximum torque of 230Nm. The transmission is paired with a 6-speed manual gearbox.
I've been driving my Wuling Hongguang S3 for almost three years now, and I often need to manually adjust the headlight height, especially on uneven roads where the beams are too low to see clearly. When parked on a completely level surface like a garage, turn off the engine, open the hood, and locate the adjustment screws behind the headlights—usually small white plastic or metal screw holes. Use a Phillips screwdriver to gently turn clockwise to lower the beams or counterclockwise to raise them. It's recommended to test the adjustment at night by aiming at a wall with the car parked 5 meters away; the center point of the beam should be about half a meter above the ground to avoid blinding oncoming traffic, which is unsafe. Don’t forget to first check if the bulbs are burnt out or if the lenses are dirty, as these can affect brightness. I perform these simple maintenance checks myself once a month to prevent nighttime mishaps. The whole process is quite straightforward, but if you're unsure, it's safest to refer to the owner's manual for the location diagram and follow the instructions.
