How to Adjust the Headlights of the Buick Envision?

1 Answers
SanZachary
07/30/25 1:13am
The headlight adjustment for the Buick Envision is located on the left front side of the steering wheel, featuring two rollers that can adjust the distance of the high and low beams. It can automatically adjust the height of the lights based on vehicle speed, front and rear load, and hill-climbing angle. Here are some related introductions about the Buick Envision: 1. The new Buick Envision adopts the latest family design language, including a winged front grille, a more three-dimensional rear design, 19-inch new-style wheels, and trapezoidal dual exhaust tailpipes. Additionally, the vehicle comes standard with an aluminum roof rack and adds two new body color options: Meteorite Gray and Mahogany Red. 2. In terms of configuration, the vehicle comes standard with six airbags, LED daytime running lights, LED taillights, keyless entry and one-button start, ANC active noise cancellation technology, engine auto start-stop, EPB electronic parking, TPMS intelligent tire pressure monitoring system, rear parking sensors, a multifunction steering wheel, cruise control, dual-zone independent automatic air conditioning, power-folding and heated exterior mirrors, and a panoramic sunroof. 3. Regarding the powertrain, the 20T model is equipped with a 1.5T engine, delivering a maximum power of 124kW (169PS) and a peak torque of 250N·m. The 28T model features a 2.0T engine with a maximum power of 191kW (260PS) and an increased peak torque of 400N·m. Moreover, the 28T model is paired with a 9-speed Hydra-Matic intelligent transmission across the entire lineup.
Was this review help?
5
0
Share
More Forum Discussions

Should I Replace a Tire That Has Been Patched 4 Times?

In general, a tire should be replaced directly after being patched 3-5 times. When a tire has a puncture wound, even if it is repaired by patching, the wound area remains the weakest part of the tire. Over time, especially when driving in rainy conditions, water can seep into the wound, eventually causing it to leak again. Therefore, when a tire's wound reaches 3-5 centimeters, it has essentially reached its service limit. The following situations require immediate replacement: 1. Severe damage to the tire tread or sidewall: This indicates that the tire can no longer be used and must be replaced to ensure driving safety. 2. Severe tread deformation or significant damage to the tire body: In cases of severe tread deformation or damage to the tire body, a new tire must be installed. Tread deformation is actually influenced by the tire body. When the tire body is subjected to significant force, its internal structure is damaged, leading to deformation, and the tread follows suit. At this point, the tire's lifespan has effectively ended.
17
2
Share

How many points are deducted for hitting the corner when exiting parallel parking?

Hitting the corner when exiting parallel parking deducts 10 points. Below is a detailed introduction about the driver's license examination: Overview: The motor vehicle driver's license examination is an official driving skills test conducted within the territory of the People's Republic of China to obtain legal authorization to drive motor vehicles. Passing the examination grants the corresponding class of license. Additional Information: The Ministry of Public Security of China has published the revised "Regulations on the Application and Use of Motor Vehicle Driver's Licenses" on its official website. According to these regulations, the content and passing standards for the driver's license examination will be unified nationwide. On May 10, 2021, the Ministry of Public Security held a press conference to announce 12 convenience measures as part of the "I Do Practical Things for the People" initiative to deepen the reform of public security traffic management "simplification, decentralization, and optimization of services."
19
0
Share

Where to Find a Nearby Shop for Dentless Car Dent Repair?

For dentless car dent repair, you can visit nearby sheet metal repair shops or go directly to a 4S store. Advantages of dentless car dent repair: Preserves original paint: Dentless car dent repair technology uses professional techniques and quick processes to maintain the original appearance of the car paint, thereby preserving and reflecting the car's original value. Traditional sheet metal painting involves many complex steps such as disassembly, sheet metal work, applying putty, painting, and baking. Even a small dent on a door requires repainting the entire door to avoid color discrepancies. Short repair time: Dentless car dent repair technology takes about 15 to 90 minutes to fix a dent, whereas traditional sheet metal painting takes 1 to 2 days, delaying normal vehicle use. Excellent long-term results: After using dentless car dent repair technology, the car body will not deform or fade, maintaining the car's original condition. If sheet metal painting is not up to standard or technicians do not follow proper procedures, issues like cracking or fading may occur later.
10
1
Share

How many labels should be affixed on the car window?

Two labels are required: the Motor Vehicle Inspection Compliance Label and the Compulsory Insurance Label. Below is more information about these two labels: 1. Compulsory Insurance Label: According to laws and regulations, this is insurance that must be purchased by individuals or entities within the specified scope. It mandates that motor vehicle owners or managers purchase corresponding liability insurance, thereby increasing the coverage rate of third-party liability insurance. In the event of an accident, compulsory insurance can provide timely and basic protection to the greatest extent for victims of traffic accidents. 2. Motor Vehicle Inspection Compliance Label: A green environmental inspection compliance label (commonly known as the green label) is issued to motor vehicles equipped with spark-ignition engines (mostly gasoline or natural gas vehicles) that meet National Standard I or above, and to motor vehicles equipped with compression-ignition engines (mostly diesel vehicles) that meet National Standard III or above. A yellow environmental inspection compliance label (commonly known as the yellow label) is issued to other motor vehicles that comply with the emission standards at the time of manufacture.
15
5
Share

Will the 4S shop arrange a replacement car for customers during car repairs?

If the repair time exceeds 5 days, the 4S shop will arrange a replacement car for customers. If it is less than 5 days, a replacement car is generally not provided. According to Article 19 of the "Regulations on the Responsibility for Repair, Replacement, and Return of Household Automobile Products," during the warranty period of household automobile products, if each repair due to quality issues (including waiting time for repair spare parts) exceeds 5 days, the consumer should be provided with a replacement car or reasonable transportation cost compensation. The repair time is calculated from the time the consumer and the repairer confirm the repair until the repair is completed. A repair that takes less than 24 hours is counted as one day. If the 4S shop indeed cannot provide or has no replacement cars available, you may consider nearby 4S shops that have been operating for a shorter time. Generally, long-established and large-scale 4S shops have more vehicles sent for repairs, and replacement cars are usually all allocated, while newer 4S shops may still have replacement cars available.
9
1
Share

Why does the tire pressure warning light remain on after a tire repair?

It indicates that the air pressure in the recently repaired tire is abnormal (usually overinflated). It must be adjusted to match the pressure of the other three tires. The tire pressure warning cannot be cleared manually. The vehicle's tire pressure warning system alerts when tire pressure is either too high or too low. It is recommended to check the pressure of all four tires. The standard tire pressure values are usually marked on the driver/passenger door edges or fuel cap, typically 2.2 bar for front tires and 2.4 bar for rear tires. After confirming all tires are properly inflated: 1. Use an OBD scanner to clear the fault code. 2. Drive at speeds above 30 km/h for some time to reset the system. Additional information: Tire pressure maintenance: Generally, car tires should be checked at least once a month. Seasonal adjustments are particularly important, with ideal times being November and May. In November when winter approaches, tire pressure usually decreases and should be slightly increased. In May when temperatures rise, check if pressures are normal. Note: Unless the tire pressure significantly exceeds standard range, avoid deliberately reducing pressure during this period.
9
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.