How to Adjust the Headlights of Geely New Vision?
1 Answers
Geely New Vision adjusts the headlights through the knob at the rear of the headlight assembly, allowing owners to adjust the lights themselves with tools. Lift the engine hood, locate the adjustment knob at the rear of the headlight assembly, and use the appropriate tool to adjust. Before adjusting, determine whether the knob adjusts left-right or up-down. The steps for adjusting the headlights of Geely New Vision are as follows: 1. Choose a dim environment: such as an underground parking lot or at night, park the car facing a wall, aligning the front of the car as straight as possible with the wall, about 5 to 6 meters apart; 2. Turn on the headlights, cover one headlight with an opaque thick cloth, and adjust each headlight separately. To ensure the headlight beam position is at the normal driving position, it's best not to leave the vehicle unloaded; you can have a friend sit in the driver's seat; 3. Use a marker or chalk to mark the center of the headlight's illumination range on the wall, and also make a mark on the wall corresponding to the car emblem (the center of the front). Measure the distance between the marks of the two headlights and the center position; the two distances should be equal. Note: If there is a phenomenon of outward or inward deviation, refer to the vehicle's user manual and use a screwdriver for fine adjustments to ensure the two headlights are symmetrically positioned left and right; 4. Adjust the height of the beam. The right headlight should be completely level and straight, while the left headlight should be adjusted upward by about 10cm, but not too high to avoid shining directly into the eyes of oncoming drivers. Note: The illumination range of the right headlight can be slightly biased to the right to improve visibility on the right side of the vehicle.
