How to adjust the headlight height on Lexus ES?

Can You Drive on the Highway with a Spare Tire?

You can drive on the highway with a spare tire, but non-full-size spare tires should not exceed 80 km/h. Below are the classifications for using different types of spare tires: 1. Full-size spare tires have no restrictions on mileage or speed and can replace any temporarily or permanently unusable tire, as they are the same size as the original tires. 2. Non-full-size spare tires can only be used on non-drive wheels and must not exceed a speed of 80 km/h, as their diameter and width are slightly smaller than the other four tires, making them suitable only for temporary use. 3. Run-flat tires (commonly known as "puncture-proof tires") do not lose air or lose air very slowly when punctured, maintaining their shape and keeping the tire bead fixed to the rim, allowing the car to drive stably for a long or short distance to a repair station.

20

2

Share

What is the function of the Jetta intake sensor?

The function of the Jetta intake temperature sensor: It detects the intake air temperature and provides the data to the ECU as a basis for calculating air density. Below is an introduction to the intake sensor: 1. Modern cars can classify sensors based on their functions, such as measuring temperature, pressure, flow, position, gas concentration, and speed. 2. The intake temperature sensor is a negative temperature coefficient thermistor. When the temperature rises, the resistance decreases; when the temperature drops, the resistance increases. The change in resistance in the circuit leads to a change in voltage, thereby generating different voltage signals to complete the automatic operation of the control system. 3. When the engine is cold, the signal from the intake temperature sensor is basically the same as that from the engine coolant temperature sensor. When the engine is warm, its signal voltage is approximately 2~3 times that of the coolant temperature sensor.

2

0

Share

How to Use Exhaust Brake and Where is the Switch?

The exhaust brake switch for heavy trucks is usually integrated with the wiper control; light trucks do not have this equipment. Methods for using the exhaust brake: 1. Integrated with the wiper switch, lift this switch, release the clutch pedal and accelerator pedal, and ensure the transmission is in a gear other than neutral for the exhaust brake to take effect. 2. To deactivate the exhaust brake, simply press the exhaust brake switch again. 3. The exhaust brake is typically activated via a manual switch. To prevent engine stalling when stopping and exhaust brake engagement during fuel injection, the exhaust brake automatically deactivates when the accelerator or clutch pedal is pressed. 4. Since fuel supply is cut off during operation, the exhaust brake cannot be used in gasoline vehicles. Proper use of the exhaust brake can significantly reduce the reliance on service brakes (foot brakes), thereby minimizing wear on brake pads (or discs) and greatly lowering the risk of driving safety hazards caused by overheating from continuous braking.

17

0

Share

What kind of engine oil should be used for the Avancier 370?

The Avancier 370 is recommended to use fully synthetic engine oil. Detailed information about the Avancier 370 is as follows: 1. The Avancier is a mid-size SUV launched by GAC Honda. Compared to models equipped with naturally aspirated engines, turbocharged engines require higher-performance engine oil to protect the engine. 2. In terms of power, this car has two models: the 240 model and the 370 model. The 240 model is equipped with a 1.5T turbocharged engine, while the 370 model is equipped with a 2.0T turbocharged engine. Since this car uses a turbocharged engine, it is recommended to use fully synthetic engine oil to protect the engine and extend the maintenance cycle. 3. There are three types of engine oil used in cars: mineral oil, semi-synthetic oil, and fully synthetic oil. Compared to mineral oil and semi-synthetic oil, fully synthetic oil performs better and has a longer usage cycle. In cold start conditions, using fully synthetic oil makes the engine run more smoothly, saves fuel, and improves the engine's fuel economy.

3

5

Share

How many liters of engine oil does the Ford Escort need for an oil change?

During regular maintenance, the Ford Escort requires 3.5 liters of engine oil; for an overhaul, it needs 4.2 liters, while the oil change process itself requires 3.5 liters. Below is some information about the Ford Escort: 1. The Ford Escort boasts a well-designed interior and exterior. The seats are wrapped in soft, zero-gravity perforated leather material, ensuring comfort and luxury; the headlights feature a strong technological appeal; the integrated instrument panel and central control screen form a smart connected display, enabling dual-screen linkage for multimedia, navigation, phone functions, and more, truly realizing the concept of seamless communication. 2. The Ford Escort offers outstanding safety performance. It is equipped with a large number of class-leading safety configurations and technologies, including a top-tier six-airbag protection system that provides comprehensive protection for all occupants. 3. The Ford Escort is known for its high fuel efficiency. The vehicle is powered by a 1.5L Ti-VCT four-cylinder engine, which utilizes Ford's advanced twin independent variable camshaft timing technology to precisely and independently control the opening and closing of the engine's intake and exhaust valves, optimizing both fuel economy and power output.

4

3

Share

What is the function of the car auxiliary water tank?

Car auxiliary water tank mainly has the following functions: 1. The auxiliary water tank serves as an auxiliary to the radiator and is also an important component of the cooling system. The radiator generates certain pressure when the temperature fluctuates, and the auxiliary water tank can regulate this. When the engine temperature is high, the liquid expands, and some of the antifreeze flows into the auxiliary water tank through the radiator cap; when the temperature drops and the cooling system pressure becomes negative, the system draws the antifreeze from the auxiliary water tank back into the cooling system through the radiator cap. 2. At the same time, the auxiliary water tank has corresponding markings indicating the liquid level, which can visually show the current water level in the radiator and whether it is sufficient.

13

2

Share

How to adjust the headlight height on Lexus ES?

Can You Drive on the Highway with a Spare Tire?

What is the function of the Jetta intake sensor?

How to Use Exhaust Brake and Where is the Switch?

What kind of engine oil should be used for the Avancier 370?

How many liters of engine oil does the Ford Escort need for an oil change?

What is the function of the car auxiliary water tank?

How to Install Dual Throttle Cables?

How to Install a Water Plug?

How to Drain the Water from the Radiator?

How to Repair a Flood-Damaged Car?