How to Adjust the Headlight Height of the Tayron?

1 Answers
DeJourney
07/30/25 12:04am
The method to adjust the headlight height of the Tayron is: Press the small lever near the front wheel, and the two sensors at the front and rear will detect the vehicle's height. Adjust the height of the headlights by raising the front sensor or lowering the rear sensor. The dimensions of the Tayron are: length 4453mm, width 1841mm, height 1632mm, with a wheelbase of 2680mm. The Tayron is equipped with a 1.4T turbocharged engine, delivering a maximum power of 110kW and a maximum torque of 250Nm, paired with a 7-speed dual-clutch transmission. It features a front MacPherson independent suspension and a rear multi-link independent suspension.
Was this review help?
17
0
Share
More Forum Discussions

Does Engine Oil Affect a Car's Power?

Engine oil does affect a car's power. If the quality of the engine oil is poor, it can increase the engine's resistance, leading to higher fuel consumption and a reduction in the vehicle's power. Below is some relevant knowledge about engine oil: The role of engine oil: The use of engine oil serves to lubricate and prevent wear, thereby maintaining the engine's optimal operation and ensuring minimal power loss. This allows the engine's full power to be effectively translated into the car's performance. Choosing engine oil: When selecting engine oil, it is advisable to opt for well-known brands and high-quality products. Additionally, pay attention to the oil's cleaning efficiency and noise reduction properties. The impact of engine oil quality: In poor working conditions, low-quality engine oil can result in louder engine noise, noticeable body vibrations, and poorer acceleration performance.
7
2
Share

Can You Wash the Car Right After Painting?

It is recommended not to wash the car immediately after painting. Below is relevant information about washing a car after painting: Painting in a paint booth: If the painting is done in a paint booth, the car can be washed as soon as it is driven out, as the car has already stayed in the booth for 3 to 4 hours. Painting at a professional shop: If the painting is done at a professional shop, the car can be washed once the staff hands it over, as professional shops follow proper painting procedures, and washing after baking the paint will not cause any issues. When painting is completed on the same day: If the car is painted and picked up on the same day, it is advisable to wait 2 days before washing. Ensure sufficient ventilation and humidity; the car can be washed after 6 to 7 hours. If the paint dries properly, the car can be washed after two days.
7
5
Share

How to Remove the Center Cap of Hongqi H5 Tire?

Open the front hood, after removal, you will see a thin water pipe joint clamped at the water inlet. Use a flathead screwdriver to pry off this black retaining ring. Pull the spray pipe out of the small hole bit by bit, remove the small black height adjustment pad on the front hood, pinch it with your hand, and unscrew it counterclockwise to remove it. Take out the small ratchet, extension bar, and use a T-30 spline head to remove the front hood lock, then place it together with the screws. Gently pry open a gap with a flathead screwdriver, then hold the hydraulic tappet with your hand and pull it outward to remove it. Use an extension bar with a 10mm socket to remove the screws securing the front hood. You will need someone to assist in holding the front hood.
2
0
Share

Where is the air intake on the BMW 3 Series?

The air intake of the BMW 3 Series is located approximately 50mm below the BMW emblem on the hood, behind the corner of the right headlight, and can be seen through the grille. Below is some extended information about the BMW 3 Series: 1. In terms of exterior configuration, the long-wheelbase models will come standard with features such as a panoramic sunroof and LED headlights (including adaptive cornering function), while the launch edition offers a luxury design package. The other three configurations provide M Sport packages, M aerodynamic components, etc. 2. For the interior, the new BMW 3 Series long-wheelbase version largely retains the main design of the overseas model. For example, it features a new floating LCD screen paired with a redesigned electronic gear lever and an M-branded three-spoke multifunction steering wheel. In terms of power, the new BMW 3 Series long-wheelbase version is equipped with the latest B-series 2.0T engine (model B48B20B), which has the same 184 horsepower output as the current 320i/Li, but the tail badge has been changed to 325Li.
13
4
Share

Where is the handbrake of Audi Q7 located?

Audi Q7's handbrake is located in the central console of the vehicle, to the left of the gear shift lever. Below is some relevant information about Audi: 1. Introduction: A luxury car brand with a logo of four interlocking rings. Currently a subsidiary of Volkswagen Group in Germany. On December 20, 2018, Audi ranked 51st in the 2018 World's 500 Most Influential Brands list. 2. History: The history of German Audi AG in manufacturing cars and motorcycles can be traced back to the 19th century. Originally, four car companies in Saxony - Audi and Horch in Zwickau, Wanderer in Chemnitz-Siegmar, and DKW in Zschopau - made outstanding contributions to the advancement of the German automotive industry at that time.
14
5
Share

What is the reason for adding urea to a car?

Adding urea to a car is primarily aimed at meeting exhaust emission standards. The exhaust contains hundreds of different compounds, and these emissions not only have a peculiar odor but can also cause dizziness, nausea, and affect human health. The function of adding urea to a car: The scientific name of automotive urea is Diesel Exhaust Fluid (DEF), which is mainly used in diesel engines. National regulations require that electronically controlled diesel engine vehicles must add urea because diesel vehicles emit a large amount of exhaust. Adding urea can reduce carbon oxides in the exhaust, lower pollutant emissions, and thus make diesel vehicles more environmentally friendly. Environmental protection departments worldwide have proposed further reductions in nitrogen oxide pollutants emitted by diesel engines. This is commonly referred to as the Euro IV standard in China. Currently, most diesel engines employ Selective Catalytic Reduction (SCR) technology. After the engine exhaust is discharged from the turbocharger, it needs to pass through a catalytic converter before entering the vehicle's exhaust pipe. The urea injector on the exhaust pipe sprays urea under the control of the vehicle's computer. When the urea solution encounters hydrocarbons emitted by the diesel engine, a chemical reaction occurs, converting the hydrocarbons into nitrogen and water, which are non-toxic to both the air and the human body.
10
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.