How to Adjust the Headlight Height of the Orlando?
1 Answers
The method for adjusting the headlight height of the Orlando involves using a roller switch marked with numerical gears. The numbers indicate the height level of the headlights, with higher numbers corresponding to a higher headlight position. The most suitable gear should be selected based on the actual situation of the vehicle owner, as the vehicle's load can cause variations. Below are the instructions for using the lights on the Chevrolet Orlando: 1. Turn Signals and Parking Lights: Simply rotate the knob on the light control lever to switch between different light modes, but this operation must be performed with the ignition on. 2. Instant High Beam Function (also known as high-low beam alternation): Pull the light control lever toward the driver once to alternate between high and low beams. The high beam indicator light will illuminate on the instrument panel. 3. Fog Light Activation: The rear fog light switch is located in the middle of the light knob; press it to turn on the fog lights. 4. Automatic Headlights, Low Beams, and Position Lights: Rotating the control lever to the AUTO position activates the automatic headlights. Rotating the knob sequentially will turn on the position lights, automatic headlights, and low beams in order. 5. Headlight Washer (available on certain models): With the headlights on, activating the windshield washer switch will also wash the headlights. To clean only the windshield without washing the headlights, turn off the headlights first. 6. Adaptive Headlights (available on certain models): Press the button on the light control lever to activate the adaptive headlights.