How to Adjust the Headlight Height of the Excelle?

How to Turn on the Air Conditioning Cool Air in the X-Trail?

The air conditioning cooling operation in the X-Trail is relatively simple and similar to most vehicle models. To turn on the air conditioning cooling, press the A/C button, switch on the fan, turn the temperature control knob to the blue side for cool air, adjust the fan speed, and set the temperature. The correct method of using the air conditioning is as follows: 1. Do not press the A/C button before starting the car to prevent increasing the load during startup, which could damage the engine and compressor. Wait until the vehicle is started and the idle speed stabilizes before pressing the A/C button. Then adjust the air conditioning blower to the appropriate level and set the air vent direction to a suitable position. 2. Before parking each time after using the air conditioning, turn off the A/C button three to four minutes in advance, switch to external circulation, and let natural air dry the surface of the evaporator box. This prevents bacteria from growing. If the air conditioning cooling is not turned off in advance, the air conditioning will develop a sour and foul smell in a short time.

8

3

Share

What is the difference between 1.4t and 2.0t displacement?

The difference between 1.4t and 2.0t lies in their power output. The 1.4t displacement delivers 150 horsepower, while the 2.0t displacement offers 190 horsepower. Both 1.4t and 2.0t represent turbocharged engine displacements. The primary function of a turbocharger is to increase the engine's air intake through the turbocharger, thereby enhancing the engine's power output and torque. Here is a brief introduction to turbocharging: 1. Turbocharging (Turbo-Boost) is a technology that utilizes exhaust gases generated by the operation of an internal combustion engine (Internal-Combustion-Engine) to drive an air compressor (Air-compressor). 2. Regarding the negative effects of turbocharged engines, after being boosted, the pressure and temperature during engine operation significantly increase. As a result, the lifespan of a turbocharged engine is shorter compared to a naturally aspirated engine of the same displacement. Additionally, mechanical performance and lubrication properties are affected, which to some extent limits the application of turbocharging technology in engines.

16

4

Share

How to reset the tire pressure monitoring indicator on the Magotan?

The Magotan has a tire pressure reset switch located on the side of the gear lever. With the ignition switch turned on, pressing this button will reset the tire pressure monitoring indicator. Below are the specific details about the Magotan's tire pressure monitoring system: 1. The tire pressure monitoring system utilizes the ABS sensor function to compare the rotation counts of the tires. Insufficient tire pressure shortens the tire circumference, causing it to rotate differently from other tires during driving. 2. The Magotan's tire pressure monitoring alerts based on wheel speed sensor comparisons. Tire pressure display can be checked using a pressure gauge. While driving, the system monitors tire inflation pressure. If the inflation pressure in one tire is significantly lower than others, the system will alert. When tire pressure decreases, the wheel's effective radius changes, altering its rotation speed. 3. To obtain accurate tire fault information, the system requires tires to have appropriate initial pressure. Initialization must be performed after each tire pressure correction, tire or wheel replacement, and when towing a trailer or after towing.

17

2

Share

What is the tire model used in the Volkswagen Santana?

The Volkswagen Santana comes with original 185/60R15 specification tires from the Hankook KINERGY series. More details about the tires are as follows: 1. These tires focus on economy, featuring fuel-saving and wear-resistant characteristics. The disadvantages are road noise, and relatively weaker handling and comfort. The price is approximately 350 yuan per tire. 2. Do not arbitrarily change the tire model configured by the original manufacturer for the vehicle, including the tire width and aspect ratio. For example, the tire model 185/60/R15 refers to a tire width of 185, an aspect ratio of 60 (commonly referred to as thickness), and R15 indicates the diameter of the wheel rim (drum). The tire model configured by the manufacturer for a vehicle is the result of tens of thousands of tests, so do not change it casually. 3. Without changing the tire model, the choice of tires can be made based on personal lifestyle and preferences. Quietness, fuel efficiency, comfort, etc., may all be factors influencing the user's tire purchase decision.

18

4

Share

Which is Better: Wet or Dry Dual Clutch?

Dry dual clutch and wet dual clutch have similarities as well as differences. Of course, it's not to say that one is better than the other, as each has its own advantages and disadvantages. Below are the differences between the two: 1. Dual clutch transmissions are divided into dry dual clutch transmissions and wet dual clutch transmissions. Whether dry or wet, the transmission principles are basically the same, with two clutches taking turns to work. 2. However, the connection medium between the clutch's driving plate and driven plate differs. The dry dual clutch relies on air. The clutch plates of a dry dual clutch directly contact the engine flywheel. Due to poor heat dissipation, dry dual clutches are prone to high temperatures in congested urban areas, even risking clutch plate burning. In this regard, wet dual clutch transmission technology is more mature. 3. The wet dual clutch relies on oil. Wet dual clutch plates are immersed in transmission oil. In terms of technological maturity and reliability, wet dual clutches are more stable because the clutch plates operate in hydraulic oil, which provides some cooling effect. Wet dual clutches have a more complex structure and higher manufacturing costs, and their power transmission efficiency is not as high as that of dry dual clutches.

13

0

Share

How to Install an ETC Device?

ETC device installation process is as follows: Upon receiving the device, first check whether the ETC card and the electronic tag (OBU) are damaged. Press the anti-tamper button on the back of the OBU, and the red light will briefly illuminate. The OLED screen will display "Tag Invalid" or "Please Insert Card," indicating the device is functioning properly. Clean the front windshield, ensuring the glass surface is smooth, clean, and dry. Then peel off the adhesive backing of the OBU and stick it to the installation position. Press firmly for 2-3 minutes to remove any air bubbles. Insert the ETC card with the front side facing the driver and the back side facing the windshield, ensuring the chip is properly inserted into the OBU device. ETC installation positions: For small vehicles such as cars and minivans, the ETC card and OBU device should be installed in the upper middle section of the front windshield. For large vehicles like trucks and buses, the installation position is in the lower middle section. ETC installation requirements: height should be no less than 1.2 meters and no higher than 2.5 meters; the installation angle N should be between 30º and 90º (the angle between the surface of the electronic tag and the horizontal plane).

5

1

Share

How to Adjust the Headlight Height of the Excelle?

How to Turn on the Air Conditioning Cool Air in the X-Trail?

What is the difference between 1.4t and 2.0t displacement?

How to reset the tire pressure monitoring indicator on the Magotan?

What is the tire model used in the Volkswagen Santana?

Which is Better: Wet or Dry Dual Clutch?

How to Install an ETC Device?

What is the difference between 5w30 and 0w30 engine oil?

What are the dimensions of the Murano?

Where to Apply for a Fuel Card?

What is the solution for the P0137 trouble code?