How to Adjust the Headlight Height of the Elysion?

What is the lifespan of the Eado EV460?

The Eado EV460 uses a lithium battery with a lifespan of 3-5 years. Here are the specific details about the Eado EV460: 1. Body dimensions: The body dimensions remain 4740mm/1820mm/1530mm, with a wheelbase of 2700mm. 2. Powertrain: The model is equipped with a permanent magnet synchronous motor, with a maximum power of 100KW. Although the power is not high, thanks to the motor's ability to deliver maximum torque from the start, the acceleration performance is quite good. 3. Exterior: The exterior of the Changan Eado EV460 battery-swapping version is expected to be consistent with the current model, featuring a leather multifunction steering wheel, in-car multimedia system, and sunroof, among others.

11

4

Share

How Does the Airbag Deploy?

Below are the conditions for airbag deployment: 1. The impacted object must be hard and have sufficient force; 2. A certain vehicle speed must be met; 3. The impact point must be near the sensor. Here are precautions for using airbags: 1. Use them in conjunction with seat belts. 2. Maintain an appropriate distance from the airbag while seated. 3. Avoid placing objects in front of, above, or near the airbag. 4. Maintain good driving habits to ensure a certain distance between your chest and the steering wheel. 5. Avoid high temperatures and store airbag components properly.

10

0

Share

What is the fuel tank capacity of the Prado in liters?

The fuel tank capacity of the Prado is 87 liters. The Prado is a mid-to-large SUV under Toyota, with a wheelbase of 2790 mm, and its length, width, and height are 4840 mm, 1885 mm, and 1890 mm respectively. The Prado has been domestically produced, and the domestic version uses a 3.5-liter naturally aspirated V6 engine. Precautions for using the fuel tank are as follows: Do not wait for the yellow light to refuel: Before driving, check the fuel gauge and calculate whether refueling is needed during the trip based on the distance and the fuel gauge reading. It is advisable to refuel in advance rather than waiting for the fuel light to come on. The fuel pump is located inside the tank and operates at high temperatures during continuous use; being immersed in fuel helps to cool it effectively. When the fuel light comes on, it indicates that the fuel level is below the pump. Refueling only when the light is on can shorten the pump's lifespan, and having too little fuel in the tank may even burn out the pump. Choose to refuel in the morning or evening: Generally, temperatures are lower in the morning and evening, and since gasoline has a low vaporization point, it is better to refuel during these times. Gasoline expands with heat and contracts with cold, and it is charged by volume. At lower temperatures, gasoline has a relatively higher density, meaning the mass per unit volume increases, allowing you to get more fuel for your money. Avoid filling the tank completely for city driving: When driving in the city, there is no need to fill the tank completely. A full tank adds extra weight to the engine, increasing fuel consumption. Since refueling is convenient in the city, there's no need to fill the tank to the brim.

5

4

Share

How to Read the Temperature on the Car's Water Temperature Gauge?

The 'C' on the water temperature gauge stands for the English word 'cold,' meaning cold, and 'H' stands for 'hot,' meaning heat. The 'water temperature gauge' includes numbers, temperature units, and a thermometer icon. The normal water temperature while driving should be around 90 degrees, slightly above the middle mark (the middle water temperature symbol is 85 degrees). Temperatures exceeding or falling below 90 degrees are abnormal. Here are the reasons for overheating: 1. Insufficient coolant: Coolant leakage can cause its temperature to rise. Check for coolant leaks; if found, repair the leaking pipes, etc. If not, promptly add the same brand of coolant. 2. Issues with the cooling fan: A faulty cooling fan can prevent heat generated during high-speed operation from being transferred to the antifreeze in time, affecting heat dissipation and causing the antifreeze temperature to rise, leading to boiling, etc. 3. Problems with the circulation water pump: If the water pump malfunctions, the water circulation on the engine's heat-conducting side cannot proceed normally, resulting in engine cooling system failure.

10

3

Share

What are the symptoms of insufficient fuel pump pressure?

Symptoms of insufficient fuel pump pressure in a car are as follows:1. Insufficient driving power, weak acceleration, and symptoms like stalling;2. The fuel pump is a professional term in the automotive parts industry. It is one of the basic components of the fuel injection system in electronically fuel-injected cars. Its function is to draw fuel from the fuel tank, pressurize it, and then deliver it to the fuel supply pipe, working in conjunction with the fuel pressure regulator to establish a certain fuel pressure;3. Common fuel pump failures include: Damaged fuel pump check valve: Results in no residual pressure, causing difficulty in starting. Worn centrifugal pump impeller: Leads to reduced fuel supply pressure and weak acceleration;4. Worn carbon brushes: Causes the fuel pump to stop rotating, making it impossible to start. In such cases, tapping the bottom of the fuel tank may temporarily restore operation. Mechanical failures like rotor jamming: Increases the working current of the fuel pump, potentially damaging the relay or fuse.

4

0

Share

Does Undercoating Have Any Effect?

Here are the functions of undercoating: 1. Anti-corrosion for the chassis: Northern regions have rain and snow weather, while southern regions have rainy and foggy weather. Moisture naturally corrodes the car's chassis over time, and residual wastewater after car washing can also cause certain damage. However, undercoating forms a protective film on the bottom of the car. 2. Protection against stone impacts: While driving, vehicles often kick up small stones, and the impact force of these stones on the car's underbody is proportional to the vehicle's speed. 3. Thermal insulation: When the air conditioning is turned on, the cold air inside the car sinks, while the hot air outside rises, eventually gathering near the car's chassis for exchange. Therefore, the protective effect of the car's chassis directly determines the vehicle's cooling efficiency. 4. Prevention of underbody scraping: Each layer of undercoating can be 1.2-2.5 mm thick, reducing damage when the car's bottom is scraped by protruding objects. 5. Savings on maintenance costs and car value preservation: The chassis supports the car's four major systems, so protecting the chassis means protecting these systems, saving a series of maintenance costs. Typically, rust starts to appear on new cars after about three years of use. Correspondingly, the better a vehicle is maintained, the higher its value. After some time of driving, whether for personal use or preparing to trade in for a new car, a vehicle that has undergone undercoating protection (especially with quality assurance from reputable large companies) will undoubtedly have higher value.

20

1

Share

How to Adjust the Headlight Height of the Elysion?

What is the lifespan of the Eado EV460?

How Does the Airbag Deploy?

What is the fuel tank capacity of the Prado in liters?

How to Read the Temperature on the Car's Water Temperature Gauge?

What are the symptoms of insufficient fuel pump pressure?

Does Undercoating Have Any Effect?

Can I Take the Driving Test If I Lost My ID Card?

What is the reason why the Benben mini odometer is not working?

Is There a Water Wading Insurance in Auto Insurance?

Will driving at 100 km/h in an 80 km/h speed limit zone during rain be captured by speed cameras?