How to Adjust the Headlight Height of the Accord?
2 Answers
The method to adjust the headlight height of the Accord is as follows: 1. Pull the engine compartment lever located at the lower left corner of the Accord's cabin to unlock the engine compartment; 2. After lifting the engine hood, locate the headlight adjustment button based on the layout; 3. Use a screwdriver to adjust the screw—turning it upward will raise the headlight beam range, while turning it downward will lower it; 4. Adjust to the appropriate height according to your needs. Properly setting the vehicle's lighting system ensures driving safety and helps avoid traffic accidents. The Accord is a mid-to-high-end sedan under Honda, with an overall length of 4930mm, width of 1845mm, height of 1470mm, and a wheelbase of 2775mm. In terms of exterior design, the Accord features LED headlights paired with 18-inch cut and smoked sport rims. It is powered by a 2.4L iVTEC engine and incorporates an EGR (Exhaust Gas Recirculation) system, coupled with a CVT transmission, delivering a maximum power output of 192kW and a maximum torque of 297Nm.
I've been driving my Accord for almost ten years, and adjusting the headlight height is something I do regularly—safety first, right? The method is super simple: First, park on a flat surface, like a garage or an empty parking lot, with the front of the car about a meter away from a wall. Start the car and turn on the headlights. Look for a small dial or switch on the lower left side of the steering wheel—pushing it will make the lights move up or down. Observe the cutoff line of the beam on the wall and adjust it to about half the height of the car to avoid blinding others. I recommend doing this at night for better visibility, and avoid doing it on a slope. Check regularly, especially after rainy days or when replacing bulbs—I check mine every two months to ensure good lighting. If there's no switch inside the car, pop the hood and use a Phillips screwdriver to manually adjust the small screw behind the headlight—same steps apply. This not only saves trouble but also helps prevent accidents.
