···
Log in / Register

How to Adjust the Headlight Height of the 2019 Elysion?

3 Answers
VanJune
09/08/25 3:44am
Open the engine compartment, and you will find two holes marked "up" and "down" above the headlights, representing "up" and "down" respectively. Insert a screwdriver into this hole and rotate it to adjust the height of the headlights. The other hole is for adjusting the vertical range of the headlights, so be careful not to confuse them.
Was this review help?
20
3
Share
MacGianna
09/20/25 2:29am
As a frequent driver of the Elysion, let me share some experience. The headlight height adjustment for the 2019 Elysion typically involves two steps: First, try the automatic knob inside the car, located on the left panel of the steering wheel, labeled 'Headlight Height Adjustment' with a numbered knob. Rotate it to select height settings from 0 to 3, corresponding to different load conditions. If the knob malfunctions or requires finer adjustments, open the engine hood, locate the small screw holes at the rear of the headlights, and gently turn the horizontal and vertical screws with a Phillips screwdriver to fine-tune the height. Remember not to set it too high to avoid dazzling oncoming drivers. During regular maintenance, check the headlights to ensure even brightness and avoid nighttime driving hazards. Regular adjustments can extend bulb life and reduce unexpected expenses. In practice, I always lower the setting when fully loaded with luggage and restore it when empty, making it both convenient and safe.
Was this review help?
7
4
Share
Expand All
AaliyahLee
11/03/25 2:53am
As a new owner of this Elysion, adjusting the headlight height is quite straightforward. Just look for the control panel near the steering wheel, where there's a knob labeled for height adjustment. Turning it can change the beam angle—low setting is suitable for city night driving, while high setting is better for heavy-load conditions. If the knob doesn't work, manual adjustment might be needed by opening the engine hood and turning the screws at the back of the headlights to set the height. However, beginners might misadjust the angle, so it's advisable to take a photo of the original position or simply visit a 4S store for assistance to avoid hassle. Safe driving is crucial, and properly set headlights ensure clear visibility, reducing accident risks. Regularly checking tire pressure and headlight condition is sufficient for a worry-free journey.
Was this review help?
9
3
Share
Expand All
More Forum Discussions

Is Geely a domestic or joint venture brand?

Geely is a domestic vehicle model, not a joint venture car. Geely is a Chinese automotive brand primarily producing SUVs, sedans, and other vehicle types. It owns six automobile brands: Geely, Lynk & Co, Volvo, London Taxi, Proton, and Lotus. Taking the Geely Vision X6 as an example, this vehicle is a compact SUV under the Geely brand, with dimensions of 4546mm in length, 1834mm in width, and 1715mm in height, and a wheelbase of 2661mm. The Geely Vision X6 is equipped with safety features such as full-speed ACC adaptive cruise control, a 360-degree 3D panoramic imaging system, an 8-in-1 Bosch ESP electronic stability program, and a comprehensive safety warning system.
9
5
Share

What engine does the Lynk & Co 03+ use?

Lynk & Co 03+ is equipped with the B4204T23 engine model. Below is additional information: Introduction to Lynk & Co 03+: The Lynk & Co 03+ features a four-cylinder engine. This vehicle is powered by a 2.0-liter turbocharged four-cylinder engine. The Lynk & Co 03+ is the high-performance version of the Lynk & Co 03, competing with performance cars like the Golf GTI. The Lynk & Co 03+ has a wheelbase of 2730mm, with length, width, and height measurements of 4677mm, 1840mm, and 1461mm respectively. Lynk & Co 03+ Powertrain: The 2.0-liter turbocharged engine used in the Lynk & Co 03+ delivers a maximum power of 187kW and a maximum torque of 350N·m. This engine reaches its peak power at 5500 rpm and its maximum torque between 1800 to 4800 rpm. It incorporates direct fuel injection technology and utilizes an aluminum alloy cylinder head and block.
6
5
Share

Should I Add Coolant or Water to the Radiator?

You should add coolant to the radiator. The main function of coolant is to cool the engine, which can operate at temperatures above 100 degrees Celsius. If water is added instead, it will boil directly and fail to effectively cool the car, potentially leading to severe engine damage or even cylinder explosion. Additionally, during cold winter weather, adding water can cause the radiator to freeze, resulting in damage. Coolant, also known as antifreeze coolant, is designed to prevent freezing, ensuring that it doesn't solidify in cold temperatures and cause the radiator or engine block to crack. Antifreeze should be used year-round, and as part of regular vehicle maintenance, the engine coolant should be replaced annually.
10
1
Share

What are the procedures for vehicle registration?

The procedures for vehicle registration are: 1. Pay the vehicle purchase tax and submit the required materials; 2. Obtain the registration application form and external inspection form, fill out the registration application form, and take the certificate of conformity and application form to the environmental protection office to get the environmental protection seal; 3. Fill out the registration application form, take the certificate of conformity and application form to the environmental protection office to get the environmental protection seal; 4. Take photos, grind the code, and print the motor vehicle parameter table, which will indicate on the original certificate of conformity whether the vehicle needs to go through the inspection line; 5. External inspection and serial number generation; 6. File submission, photo number selection, payment, and inspection line process; 7. License plate installation, environmental protection card attachment, and receipt of the vehicle license and vehicle registration certificate. License plates, commonly known as vehicle plates, refer to the plates hung on the front and rear of the vehicle. They are usually made of aluminum, iron, plastic, or paper, and display the vehicle's registration number, registration region, or other relevant information.
3
3
Share

What brand is the engine of the Hongqi H5?

The engine of the Hongqi H5 is independently developed domestically. The vehicle is equipped with two turbocharged engines: a 1.5T and a 1.8T. The Hongqi H5 is a mid-size sedan under FAW Hongqi, with body dimensions of 4945mm in length, 1845mm in width, and 1470mm in height, and a wheelbase of 2875mm. The body structure is a 4-door, 5-seat sedan. The Hongqi H5 largely continues the design of the Hongqi B-Concept, featuring an inverted trapezoidal front grille connected to the headlights, with vertical chrome trim strips embedded inside. The interior layout includes an independent floating central control screen, a three-spoke multifunction steering wheel, and an electronic parking brake.
10
5
Share

How to Turn on the Heater in Qoros 5?

Method to turn on the heater in Qoros 5: Start the engine and wait until the coolant temperature reaches the normal operating level before activating the heating system. First, set the air conditioning to recirculation mode, then adjust the temperature control to the heating zone (red area). Next, set the blower speed to a comfortable level and adjust the air vent direction as desired. The Qoros 5 is a compact SUV from Qoros, measuring 4600mm in length, 1869mm in width, and 1658mm in height, with a wheelbase of 2710mm. Power comes from a 1.6-liter turbocharged four-cylinder engine delivering maximum power of 145kW and peak torque of 290Nm.
16
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.