···
Log in / Register

How to adjust the headlight height of Porsche 718?

4 Answers
VonAthena
09/06/25 2:41am

First, locate the headlight height adjustment knob on the left side of the Porsche 718's dashboard. The "-" position is the lowest height setting, "1" raises the headlight height by one level, "2" provides a relatively higher position, and "3" is the highest setting. Adjust the knob according to your needs. Below is some related information about car headlights: 1. The purpose of headlight height adjustment is to obtain the optimal illumination distance by regulating the headlight height, thereby avoiding potential hazards. 2. Normally, the headlight height adjustment switch uses a rotary wheel marked with numerical positions. These numbers indicate the headlight height level—the higher the number, the higher the headlight position. Choose the appropriate setting based on actual conditions, as vehicle load may cause variations.

Was this review help?
1
0
Share
NovaLee
09/18/25 2:45am

I recently got my hands on a Porsche 718 and found adjusting the headlight height incredibly simple and convenient. After starting the car, I scroll through the multifunction buttons on the steering wheel to access the settings menu, where I find the lighting options. Inside, there's a slider for headlight height adjustment. With a gentle up or down drag, I can control the beam position, aiming for even light projection on the ground several dozen meters ahead—neither glaring nor too dim. This is crucial because uneven roads or changes in vehicle load can cause misalignment. I usually test it at night on empty roads, observing the shadow against a wall to ensure it's straight. Once adjusted, the system saves automatically, so no need to repeat the setup next time. Porsche's design is truly thoughtful—the operation is smooth, making it easy even for an average driver like me to master. Developing a habit of regular checks can prevent many driving hazards.

Was this review help?
7
5
Share
Expand All
VonTravis
11/01/25 3:13am

As a driver who frequently takes long-distance trips, I place great importance on the safety significance of headlight height adjustment. The Porsche 718 offers an intuitive adjustment method: after starting the vehicle, open the vehicle menu on the central display screen, select the lighting settings, and move the height slider to fine-tune the beam range. The key is to ensure that the light does not shine into the eyes of oncoming drivers or is too low to see the road ahead. I recommend testing on a flat road surface, with the ideal height focusing approximately 50 meters in front of the car. Safety comes first, and neglecting adjustment can lead to a sharp increase in the risk of nighttime accidents. When carrying more passengers or a full trunk, the headlight position may change, so timely correction is necessary. During maintenance, it's advisable to check the system as well—Porsche's system responds with precision.

Was this review help?
20
2
Share
Expand All
ThomasLee
12/15/25 3:21am

I've been modifying my Porsche 718 for years, and headlight height adjustment isn't just basic operation—it can be done with creativity. You can quickly complete it through the in-car menu: after starting, navigate to the lighting settings and slide the adjustment knob to change the height. But if you're like me and enjoy DIY, you can manually fine-tune the screw positions under the hood for more personalized needs. Just be careful not to overdo it, as it might violate light regulations or affect others. Use auxiliary tools during adjustment to ensure accuracy. The whole process is simple and fun, enhancing driving pleasure and personal style.

Was this review help?
6
5
Share
Expand All
More Forum Discussions

How often should the transmission fluid be changed in a Ford Escort?

Here is an introduction to the transmission fluid change interval for the Ford Escort: 1. Generally, the fluid should be changed every three years or around 60,000 kilometers. 2. Typically, manual transmissions require 2-3 liters, while automatic transmissions need about 5-6 liters. 3. It is recommended to replace the oil filter screen at the same time. Here is some related information about transmissions: 1. The transmission mainly refers to the car's gearbox, which is divided into manual and automatic types. 2. A manual transmission primarily consists of gears and shafts, achieving speed and torque changes through different gear combinations. 3. An automatic transmission (AT) is composed of a torque converter, planetary gears, a hydraulic torque system, and a hydraulic control system, achieving speed and torque changes through hydraulic transmission and gear combinations. 4. The internal control mechanism of an automatic transmission is precise with small matching clearances, and most automatic transmissions have a fluid change cycle of about two years or 40,000 to 60,000 kilometers.
15
0
Share

What does 1.2T mean in a car?

1.2 refers to the engine displacement of 1.2 liters in the car, and the T stands for Turbo, which means turbocharging. The preceding number indicates the engine displacement, with 1.2 representing 1.2 liters, while the T denotes forced induction, indicating the engine employs turbocharging technology. Typically, small-displacement engines use turbocharging. Below is relevant information about turbocharged engines: 1. A turbocharged engine relies on a turbocharger to increase the engine's air intake. The turbocharger (Turbo) is essentially an air compressor. 2. It utilizes the exhaust gases from the engine as power to drive the turbine in the turbine housing (located in the exhaust passage). The turbine, in turn, drives the coaxial impeller located in the intake passage, compressing fresh air delivered through the air filter pipe and then sending it into the cylinders. As the engine speed increases, the exhaust gas velocity and turbine speed also increase synchronously, enhancing the air compression level and correspondingly increasing the engine's air intake, thereby boosting the engine's output power. 3. The greatest advantage of a turbocharged engine: It can significantly increase the engine's power and torque without enlarging the engine displacement. After installing a turbocharger, an engine's maximum output power can increase by approximately 40% or more compared to without a turbocharger.
9
2
Share

Where do the three major components of Aeolus Yixuan come from?

Aeolus Yixuan's three major components are all independently developed domestically. More details about Yixuan's three major components are as follows: 1. Engine: Aeolus Yixuan offers two engine options: 1.0T and 1.5T. The 1.0T engine, coded DFMC10TDS, delivers a maximum output of 125 horsepower and 196 Nm of torque. The 1.5T engine, coded DFMA15T, produces 150 horsepower and 230 Nm of torque. 2. Transmission: Except for the base model equipped with a 5-speed manual transmission, all other Yixuan models use Getrag's 6-speed wet dual-clutch transmission. In any driving mode, there is slight jerkiness during low-gear shifts, a common issue with many models using Getrag DCT transmissions. 3. Chassis: The Yixuan features MacPherson strut front suspension and torsion beam rear suspension. The initial damping of the suspension is relatively stiff, resulting in noticeable bumpiness on rough roads, indicating average tuning.
10
4
Share

What is the fuel tank capacity of the Roewe i5 in liters?

The fuel tank capacity of the Roewe i5 is 50L, as officially announced. Owners who have purchased the Roewe i5 can also check this information on the vehicle's configuration sheet. The recommended fuel grade for the Roewe i5 is 92 octane, with a fuel consumption of 5.5-5.9L per 100 kilometers. A full tank can provide a driving range of approximately 847-909km. During daily driving, it is important to always monitor the remaining fuel level in the tank. This is typically done by observing the fuel gauge inside the vehicle. Under normal circumstances, the fuel level will be accurately reflected on the gauge. The fuel gauge usually has 5 to 6 segments, and it is advisable to refuel when only 2 segments remain to avoid running out of fuel on the road. In actual refueling situations, the amount of fuel added may exceed the marked capacity. This is because the fuel tank capacity specified by the manufacturer is measured from the bottom of the tank to the safety limit, leaving some space from the safety limit to the tank opening. This space is designed to accommodate fuel expansion due to temperature increases without causing overflow. If fuel is added up to the tank opening during refueling, the actual amount of fuel added may exceed the marked tank capacity.
11
0
Share

What is the reason why the Mazda 6 key can unlock but not lock?

Mazda 6 key can only unlock but not lock is generally caused by remote control damage, or poor lock block actuator and its circuit. It is recommended to go to a repair shop for specific inspection. Below is relevant information about car smart keys: 1. Car smart keys are common keyless entry systems, also known as smart key systems, which consist of a transmitter, remote central lock control module, driving authorization system control module, three receivers, and related wiring harnesses. 2. This smart key can emit infrared signals, which can open one or two doors, the trunk, and the fuel filler cap, and can also operate the car's windows and sunroof. More advanced smart keys are like a credit card. When the driver touches the door handle, the central lock control system starts working and emits a wireless query signal. After the smart key card responds correctly, the car lock automatically opens. The engine will only start when the central processor senses that the key card is inside the car. 3. This system uses RFID (Radio Frequency Identification) technology. Normally, when the owner approaches the vehicle within about one meter, the door lock will automatically open and the anti-theft system will be deactivated; when leaving the vehicle, the door lock will automatically lock and enter the anti-theft state. When the owner enters the car, the in-car detection system will immediately recognize the smart card. At this time, just lightly press the start button (or knob) to start the vehicle normally. Throughout the entire process, the car key does not need to be taken out.
1
3
Share

Is the Volkswagen Lavida in Pearl White or White?

The white color of the Lavida is not pearl white. The official website lists the color as Candy White. The Lavida comes in seven main colors: Reflex Silver, Deep Blue, Magma Red, Deep Black, Candy White, Lake Silver, and United Gray. The white is a standard paint, while the other colors are metallic paints. You can choose a metallic white paint on the official website, which could be pearl white with fine shimmer. Below is more information about the Lavida: Dimensions: Length 4608mm, width 1743mm, height 1465mm, with a maximum trunk opening width of 1215mm and a volume of 472L. Exterior: Features the traditional Volkswagen grille and U-shaped front face design, teardrop-shaped headlights, and a very unique appearance. It retains a side profile similar to the Octavia, with four prominent round air vents, chrome paddles, and rings. The steering wheel and dashboard include Bluetooth headset controls and volume adjustment, and it comes standard with ESP (Electronic Stability Program) and front side airbags.
10
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.