How to adjust the headlight height of Audi A4?

1 Answers
JuneLynn
07/29/25 1:28pm
Audi A4 headlight height adjustment methods: 1. High-end models can control the headlight height through the knob on the center console; 2. If there is no headlight height adjustment function, you can directly open the engine hood and use the knob on the headlight to adjust the height. Headlight height adjustment is a function available in many cars. Cars with this configuration have a knob in the headlight control area, which can be used to directly adjust the headlight height inside the car. The Audi A4 is a B-class model manufactured by FAW-Volkswagen. In terms of body dimensions, its length, width, and height are 4818mm, 1843mm, and 1432mm respectively, with a wheelbase of 2908mm.
Was this review help?
14
2
Share
More Forum Discussions

What Should Be Noted for Safe Driving in Summer?

Summer driving requires attention to mirror reactions, inspection of car components, and weather temperatures. Be aware of the impact of high temperatures on the vehicle: Many parts of a car are sensitive to high temperatures. For example, the engine can easily overheat when temperatures rise, which is one of the significant factors contributing to unsafe conditions. It is essential to enhance preventive measures. Regularly inspect and maintain the engine's cooling system, ensuring that components like the fan and thermostat function correctly. Any malfunction should be repaired promptly. Before driving, check that the coolant level is within the normal range to avoid unnecessary accidents. Pay attention to vehicle component issues in summer: Prevent tire blowouts effectively by regularly checking the tires. If bulges, cracks, or other damages are found, repair or replace them immediately. Adjust the tire pressure to the lower end of the recommended range to prevent blowouts due to excessive heat. Regularly inspect the fuel and electrical circuits for damage or looseness to prevent leaks and other issues, thereby eliminating the risk of fire at the source.
17
2
Share

What are the requirements for participating in the license plate lottery?

The primary requirement for participating in the license plate lottery is that the applicant must be a resident of the city, possess a valid motor vehicle driver's license, and either have no small passenger vehicle registered in their name within the city or have all such vehicles registered as forcibly deregistered. Application for the car license plate lottery: Submit an application to the city's regulation office and participate in the license plate lottery or bidding with a valid code. Both individuals and organizations need to obtain a quota by applying to the city's regulation office. Applications for incremental quotas or renewal quotas can be processed through the designated website. For those unable to apply online or required to confirm in person, applications can be made at service windows. Checking the results of the car license plate lottery: The results are generally announced on the 26th of each month. The lottery takes place around 10 a.m. on the 26th, and the results can usually be checked about an hour after the lottery. To participate in the lottery, applications must be completed by the 8th of each month. Applications submitted before the 8th will have their review results announced on the 25th of the same month, while applications submitted after the 8th will have their review results announced on the 25th of the following month.
5
0
Share

What does the M gear in a manual-automatic transmission mean?

M gear in a manual-automatic transmission refers to the manual shifting mode. Below is relevant information about the M gear in a manual-automatic transmission: Tips for using the M gear in a manual-automatic transmission: When overtaking, if you are in D gear, the vehicle speed will not increase rapidly even if you press the accelerator hard, and you can only shift up sequentially to overtake. However, switching to M gear makes a big difference. At this time, pressing the accelerator allows the vehicle to utilize the high torque of lower gears for instant acceleration, completing the overtaking action more quickly. When going down a long slope, if driving an automatic transmission, the vehicle speed will uncontrollably increase, requiring timely braking while coasting. But if you engage manual mode when going downhill and shift the gear lever backward to lower the gear, you can fully utilize engine braking to reduce speed. Upon reaching the bottom of the slope, you can quickly shift up or switch back to automatic mode to resume normal driving. Functions of the M gear in a manual-automatic transmission: M gear is the manual mode of a manual-automatic transmission or the simulated manual mode of a CVT transmission. It can also be used to shift up or down via paddle shifters on the steering wheel.
17
0
Share

Can Trailers Go on Highways?

It depends on the specific situation. If it is a personal trailer, it is not allowed on highways. Legal Basis for Trailers: According to Article 56 of the "Regulations for the Implementation of the Road Traffic Safety Law," motor vehicles towing trailers must comply with the following provisions: Trucks, semi-trailer tractors, and tractors are only allowed to tow one trailer. The lighting signals, brakes, connections, and safety protection devices of the trailer must comply with national standards; small passenger cars are only allowed to tow travel trailers or trailers with a total mass of less than 700 kilograms. Trailers must not carry people; the load capacity of the trailer towed by a truck must not exceed the load capacity of the truck itself. Large and medium-sized passenger cars, low-speed trucks, three-wheeled vehicles, and other motor vehicles must not tow trailers. Regulations for Towing Motor Vehicles: The towed motor vehicle must not carry people other than the driver and must not tow a trailer. The width of the towed motor vehicle must not exceed the width of the towing motor vehicle. When using a soft connection towing device, the distance between the towing vehicle and the towed vehicle must be more than 4 meters and less than 10 meters. Both the towing vehicle and the towed vehicle must turn on the hazard warning flashers. Truck cranes and wheeled special-purpose machinery vehicles must not tow other vehicles. Motorcycles must not tow vehicles or be towed by other vehicles.
11
5
Share

Can China 5 Vehicles Be Licensed After the Implementation of China 6 Standards?

After the implementation of China 6 standards, China 5 vehicles can no longer be licensed, but newly licensed China 5 vehicles can still continue to be used. Below is an introduction to China 5 and China 6: Introduction to China 6 Standards: Compared to China 5, China 6 standards impose stricter requirements on carbon monoxide, nitrogen oxides, and hydrocarbons in emissions. Additionally, China 6 standards include new regulations on PN particulate matter. Introduction to China 5 Standards: During the China 5 phase, emission standards for diesel and gasoline vehicles differed. However, China 6 adopts a fuel-neutral principle, meaning the emission limits are the same regardless of the fuel type. Differences Between China 6 and China 5: After the formal implementation of China 6 standards, the main impact will be on the production, import, sale, and registration of new vehicles. Existing China 5 vehicles will no longer be allowed to be registered or licensed. However, previously registered and licensed China 5 vehicles can still be used, will not affect normal annual inspections, and can be traded as used vehicles. The China 6 standard will be one of the strictest standards globally. After July 1, 2019, China 5 vehicles in most regions of the country will no longer be eligible for licensing, and many regions have already or will implement the China 6 standard ahead of schedule.
1
1
Share

What are the precautions for purchasing a new car?

When purchasing a new car, pay attention to the vehicle's manufacturing time, check the glass markings, and inspect the inner wall of the exhaust pipe. Check the vehicle's manufacturing time: On the nameplate of the co-driver's door, there is the vehicle's manufacturing date. For domestic cars, it should not exceed three months, and for imported cars, it should not exceed six months. Otherwise, it might be a stock car. Check the glass markings: Check if the glass markings are consistent with the original factory. The production date should not be later than the factory's date. The numbers represent the year, and the dots represent the month. If the dot is in front, subtract it from 7; if it's at the back, subtract it from 13. If the markings on all four glasses are different, it might be an accident car. Check the inner wall of the exhaust pipe: The mileage should preferably not exceed 50 kilometers. Inspect the inner wall of the exhaust pipe for any black traces. If it's noticeably black, it might be a test-drive car. Check the car paint under both direct and indirect light for scratches. Small dents should be repainted smoothly.
11
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.