How to Adjust the Headlight Height of a Magotan?
2 Answers
Steps to adjust the headlight height of a Magotan: 1. Find a wall, ensure the ground is level, and park the car about 10 meters away from the wall. 2. Measure the height from the ground to the center of the headlights and the distance between the two headlights. 3. Place a horizontal masking tape on the wall 0.1 meters lower than the headlights, ensuring the tape is centered directly in front of the car. 4. Turn on the headlights. 5. Adjust the vertical adjustment screw until the headlight beam is centered on the tape on the wall. 6. Continue adjusting the vertical adjustment screw until the headlight beam is straight ahead. To ensure the adjustment is correct, measure the height of the beam on the wall and the height of the headlights to confirm they are equal.
I'm an experienced driver who's been driving a Magotan for years, and adjusting the headlight height is pretty straightforward. Look for the control panel on the left side of the steering wheel, near the light switch—there's a small rotary knob marked with a scale from 0 to 5. At night, park in a flat parking lot or in front of a garage, turn on the headlights, and face a wall to see where the light beam falls. Slowly turn the knob to adjust it to the right height. If it's too low, you'll strain your eyes to see the road; if it's too high, others might think you're using high beams and get blinded. Remember to double-check after every car wash or when carrying heavy loads—properly leveled headlights ensure safe and worry-free driving. This small adjustment can prevent accidents and reduce risks during night driving. I recommend checking it once a month to ensure the lights are accurately aligned.
