How to Adjust the Gap of a Car Trunk?

Can You Reverse Park Without Adjusting the Mirrors?

You can reverse park without looking at the mirrors. Here are the relevant introductions: Non-Shaped: For "Non-shaped" reverse parking, the vehicle should be perpendicular to the target parking space. Using the B-pillar of your vehicle as a reference point and the first parking space as a guide, you can generally reverse into the third parking space. This positioning method is more suitable for novice drivers. The advantage is that if mastered well, it's relatively easy to complete in one attempt, but the downside is that it's somewhat mechanical. Linear: For "linear" parallel parking, use the car in front as a reference. Align your car's body, turn the steering wheel to the right, and when the angle between the two cars reaches 45 degrees, observe and straighten the steering wheel while reversing. If estimated correctly, you can complete the parking in one go. Diagonal Parking: When the side mirror aligns with the parking space boundary line, turn the steering wheel fully outward and move forward. When the car body aligns straight with the parking space, straighten the wheels and start reversing, directly backing into the parking space.

6

3

Share

What does the EPC light on in a Volkswagen Golf indicate?

Volkswagen Golf's EPC light coming on is mainly caused by a dirty throttle body. In this case, simply cleaning the throttle and then performing a reset can resolve the issue. Another reason could be a leak in the intake system, which triggers the engine control unit to detect the problem and illuminate the EPC warning light. Below is an extended introduction to this issue: 1. Introduction to EPC: EPC stands for Electronic Power Control (full name: Engine Electronic Stability System), and many people also refer to it as the electronic throttle. The EPC indicator light is quite common in Volkswagen vehicles. After turning the ignition key, the vehicle begins a self-check, during which the EPC light will illuminate for a few seconds and then turn off. If the light remains on after the vehicle starts, it indicates a fault in the vehicle's mechanical or electronic systems. 2. Other reasons for the EPC light to come on: A leak in the crankcase ventilation system can also cause this fault. Severe or obvious vacuum leaks are not the issue; rather, it's the minor leaks that the control unit cannot effectively detect. When the compensation adjustments made by the control unit exceed the limits allowed by its internal program, the control unit will determine that there is a problem with the electronic throttle system, and the EPC fault light will illuminate. However, the actual reason for the EPC light coming on in this process is not due to a functional issue with the electronic throttle control system itself. A faulty brake light switch can also lead to this phenomenon.

13

0

Share

Is the Purchase Tax the Same for the First and Second Car?

First car and second car purchase tax are the same. Here are the specific details about automobile taxes: 1. Automobile taxes include: purchase tax, vehicle and vessel usage tax, comprehensive tax paid when purchasing imported vehicles, etc. 2. Calculation rule: Vehicle purchase tax payable = taxable price × 10%. 3. Vehicle and vessel tax: Collected annually per vehicle. Divided into 7 tiers based on vehicle displacement. 4. Vehicle purchase tax: A tax levied on individuals and units purchasing specified vehicles within China. It evolved from the vehicle purchase surcharge.

14

1

Share

What can be done when the car's rearview mirror is unclear in the rain?

Here are specific solutions for unclear rearview mirrors during rain: 1. Soapy water: Soap breaks the surface tension of water, preventing water droplets from forming. 2. Install rain deflectors: Cars equipped with rain deflectors don't need to worry about obscured rearview mirrors due to raindrops. 3. Apply waterproof film: This method works similarly to soapy water but offers long-lasting protection. Waterproof films are durable, cost-effective, and a worthwhile choice for many car owners.

1

2

Share

Are the vehicle manufacturing date and the factory release date the same?

Vehicle manufacturing date and factory release date are not the same. The following is additional information: Methods to check a car's production date: Check the nameplate in the engine compartment; Look at the small nameplate around the door seam; Check the VIN number under the windshield; Refer to the car's manual. The significance of a car's production date: It is used for depreciation valuation when purchasing car damage insurance; When buying a new car, it helps determine if the vehicle is from inventory; In case of safety-related quality issues requiring manufacturer recalls, the production date is used to identify affected vehicles; The production date determines the car's model year, which affects its configuration and the part numbers of installed components.

16

1

Share

What is the fuel consumption of the Tang DMI?

The comprehensive fuel consumption of the Tang DM is 9L/100km. The above is the NEDC comprehensive fuel consumption, which is the data of comprehensive working condition fuel consumption measured under the NEDC test procedure. The actual fuel consumption is higher than this value, ranging from 6.1-6.6L/100km. The level of car fuel consumption is directly related to five major factors, namely driving habits, the car itself, road conditions, natural wind, and environmental temperature. The specific factors that will increase car fuel consumption are as follows: Driving habits: Rough driving, such as sudden acceleration, frequent overtaking, and not releasing the throttle in advance when encountering a red light, will increase fuel consumption. The car itself: Cars with larger displacement consume more fuel than those with smaller displacement, because larger displacement generally means greater power, requiring more gasoline to burn and do work. Cars with greater self-weight will have higher fuel consumption because greater self-weight requires larger driving torque. Road conditions: Dirt roads, muddy roads, soft roads, mountain roads, etc. Driving on these roads increases resistance and fuel consumption. Natural wind: Driving against the wind or on windy days increases car resistance and fuel consumption. Low environmental temperature: When the engine block temperature is low, the gasoline injected during cold starts is not easy to atomize, requiring more gasoline to be injected for combustion, increasing fuel consumption. At the same time, when the temperature is low, the engine computer will control the use of higher RPM to warm up the car, which will also increase fuel consumption.

18

1

Share

How to Adjust the Gap of a Car Trunk?

Can You Reverse Park Without Adjusting the Mirrors?

What does the EPC light on in a Volkswagen Golf indicate?

Is the Purchase Tax the Same for the First and Second Car?

What can be done when the car's rearview mirror is unclear in the rain?

Are the vehicle manufacturing date and the factory release date the same?

What is the fuel consumption of the Tang DMI?

Why are there few buyers for the Audi S8?

What size wrench is used for an M8 hex bolt?

What does Audi drive-select mean?

What are the differences between SUV, MPV, XRV, and CRV?