How to Adjust the Fuel Consumption Display on the Teana?

What does the letter K represent in a car's model year?

The Vehicle Identification Number (VIN) is a 17-character code formed by a combination of letters and numbers, often referred to as the "car's ID card." The 10th character represents the model year, with K indicating vehicles manufactured in 2019. Below is relevant information: 1. The Vehicle Identification Number (VIN), also known as the chassis number, is a unique 17-character alphanumeric code assigned to each vehicle. It identifies the manufacturer, engine, chassis serial number, and other specifications of the car. 2. How to read a car's VIN: The 1st character "L" represents China. The 2nd and 3rd characters indicate the manufacturing plant. Characters 4-9 represent the vehicle type and configuration. The 10th character denotes the model year, using a letter or number (excluding 0, O, Q, I, and Z). The 11th character identifies the assembly plant with a letter or number. The last 6 characters are the production sequence number.

6

4

Share

What Causes the Clutch Pedal Not to Return to Position?

The reasons for the clutch pedal not returning to position are as follows: 1. There are two main causes for the clutch pedal not returning. First, with sufficient brake fluid, if the clutch master cylinder is damaged, the clutch pedal will not return, and the vehicle can only be driven after replacing the faulty clutch master cylinder. 2. Second, if there is no brake fluid or if the brake fluid delivery pipe is cracked and leaking, causing the brake fluid level to drop to an unreasonable state, the clutch will not automatically return. Additional Information: 1. The clutch refers to the separation device between the car engine and the transmission, also known as the clutch. In automatic transmission vehicles, the clutch is integrated into the transmission to enable automatic shifting. The clutch is not the brake. In purely automatic transmission vehicles, there is no clutch, only the brake and accelerator pedals. 2. The clutch should not be used as a brake. If the clutch is pressed while going downhill, the car will accelerate because the drivetrain is disconnected from the wheels, and the engine can no longer control the vehicle. The car's speed will increase under the influence of inertia and gravity.

16

3

Share

How to turn off the NIO ES8?

The NIO ES8 does not have a start button or a shut-off button. The NIO ES8 is equipped with a smart key that can be used to perform the shut-off operation. The steps are as follows: 1. After parking, shift to P gear and take the car key with you. 2. After exiting and closing the door, press the lock button on the key to automatically shut off the engine and lock the car. Here is some information about this car: 1. Exterior. The NIO ES8 features a large front grille, with unique and bold designs for the daytime running lights and headlight areas. The side profile includes a floating roof, while the rear adopts streamlined LED taillights, resulting in a design that is both simple and elegant. 2. Interior. The NIO ES8 primarily uses a vertical 10.4-inch in-car screen to control most functions, equipped with an "In-Car AI Assistant" human-machine interaction system. 3. Performance. The NIO ES8 is equipped with dual front and rear AC asynchronous motors, each with a maximum power output of 240kW (326PS) and a peak torque of 420N·m. The official 0-50km/h acceleration time is 2.2 seconds, and the 0-100km/h acceleration time is just 4.4 seconds. It comes with a 70kWh ternary lithium battery, which can charge from 0 to 80% in 1 hour under fast charging mode.

14

4

Share

What does a triangle with an exclamation mark inside indicate?

It indicates an important warning in the vehicle. You can press the function button on the left side of the steering wheel to access the warning section and see what it is alerting you about. Generally, it could be one of the following situations: 1. It might indicate low fuel, low tire pressure, or low engine oil. In some vehicles, this light serves as the traction control system warning light, which may appear after a wheel loses signal during an inspection (when the wheels are suspended) and can be resolved by visiting a service station for adjustment. 2. It could also indicate issues with the ABS or traction control system, alerting you that driving may be affected on poor road conditions. It is recommended to visit a service station for inspection when possible. This indicator is the TCS (Traction Control System) light. 3. The dashboard varies among different vehicles, but common gauges include the speedometer, tachometer, oil pressure gauge, coolant temperature gauge, fuel gauge, and charging gauge. 4. The brake warning light is red and features a circle with an "!" symbol inside. If the red brake warning light is illuminated, it indicates one of the following issues with the braking system: severely worn brake pads, low brake fluid level, or the parking brake being engaged (parking brake switch closed).

9

1

Share

Where is the VIN number on the Haval H6?

The VIN number of the Haval H6 is located at: 1. The lower right corner of the front windshield; 2. On the crossbeam under the front passenger seat; 3. Behind the engine side. More details are as follows: 1. The Haval H6 is a compact SUV with body dimensions of 4653mm in length, 1886mm in width, 1730mm in height, and a wheelbase of 2738mm. 2. The Haval H6 is equipped with a 2.0L turbocharged engine, delivering a maximum horsepower of 211PS, a maximum power of 155kW, and a maximum torque of 325Nm. Its tire specification is 235/60R18, with a non-full-size spare tire. It features a MacPherson independent front suspension and a double-wishbone independent rear suspension.

7

0

Share

What is the best position to install ETC in a car?

For small cars, the ETC is generally installed in the upper middle part of the front windshield, while for large vehicles such as trucks and buses, the installation position is in the lower middle part. The suitable installation position should be no lower than 1.2 meters and no higher than 2.5 meters, with an installation angle between 30 to 90 degrees. For vehicles with anti-explosion film or those that have been retrofitted with anti-explosion film, it may affect the signal transmission of the microwave communication link, so it should be installed in the microwave skylight zone. ETC stands for Electronic-Toll-Collection, meaning electronic toll collection system. To apply for ETC, you need to provide the original and photocopy of the vehicle owner's valid ID card and vehicle license. If the application is not made by the owner, the agent's valid ID card is also required. The photocopy of the vehicle license should include the page with the most recent annual inspection seal. Additionally, a bank card for deducting highway tolls is required, and the vehicle must be registered under the name of an individual aged between 18 and 60. Here are some precautions for installing ETC: Do not obstruct the view; it is best to install it behind the rearview mirror: Many car models have a large inclination angle of the windshield, which can reduce the driver's field of vision. If this is not considered during ETC installation, it can increase the driver's blind spot. Installing it behind the rearview mirror on the right side can avoid obstructing the view. Do not affect charging: The ETC electronic tag consumes power but generally does not require charging or battery replacement because it has a solar panel on the back that can charge itself. Therefore, during installation, avoid the black areas on the windshield and positions that may block the solar panel. Once installed, do not remove it arbitrarily: The button in the middle of the adhesive is an anti-removal lever, connected to a switch below. After the electronic tag is installed, the windshield will press the anti-removal lever in. If the tag is removed arbitrarily, the lever will pop out and trigger the switch, locking the electronic tag and rendering it unusable. You will then need to go to an ETC service point to unlock it. This is designed to prevent multiple vehicles from sharing one device. When using ETC, note the following: The ETC transaction sensing range is 8 meters. To prevent the ETC device of the vehicle in front from malfunctioning, maintain a distance of more than 10 meters from the vehicle in front to avoid automatic sensing and paying for the vehicle ahead. The ETC lane recognition speed is 20 kilometers per hour; driving too fast may result in failure to read the vehicle device information and cause payment failure. When using a debit card linked to ETC, insufficient balance may also lead to payment failure.

6

3

Share

How to Adjust the Fuel Consumption Display on the Teana?

What does the letter K represent in a car's model year?

What Causes the Clutch Pedal Not to Return to Position?

How to turn off the NIO ES8?

What does a triangle with an exclamation mark inside indicate?

Where is the VIN number on the Haval H6?

What is the best position to install ETC in a car?

What are the gas-electric hybrid vehicles available?

Which car has a horse on its license plate?

How to Turn on the Rear Fog Light of a Passat?

How to Adjust the Clock on a Buick GL8?