How to Adjust the Front and Rear Seats of the Trumpchi GS4?

2 Answers
MacAugust
08/27/25 5:33am
The method to adjust the front and rear seats of the Trumpchi GS4 is to pull the backrest adjustment handle on the side of the seat. Taking the 2021 manual elite edition Trumpchi GS4 as an example, its body dimensions are: length 4545mm, width 1856mm, height 1700mm, wheelbase 2680mm, fuel tank capacity 55l, and body weight 1480kg. The 2021 manual elite edition Trumpchi GS4 features a MacPherson independent front suspension and a multi-link independent rear suspension. It is equipped with a 1.5T turbocharged engine, delivering a maximum horsepower of 169PS, maximum power of 124kW, and maximum torque of 265Nm, paired with a 6-speed manual transmission.
Was this review help?
10
4
Share
OliveDella
09/09/25 4:30am
Friends who drive the GAC GS4, adjusting the seat forward and backward is actually very simple. Look down at the left side under your seat—do you see a silver horizontal bar? That handle-like thing. Every time I get in the car, I use my left hand to pull it upward, and you can feel the seat unlock. Then, use the force of your back to lean backward or push forward, slowly moving to a comfortable position. Once you reach the desired distance, just release the handle, and it automatically locks. It's recommended to adjust while parked to avoid distractions while driving. Also, remember to check if the seat is securely locked—otherwise, it could slide during sudden braking, which is dangerous. I usually leave some space for my knees to move; being too close makes pressing the accelerator tiring, while being too far back makes braking harder. Finding the right position is crucial, especially for long-distance driving.
Was this review help?
9
5
Share
Expand All
More Forum Discussions

Is the Golf GTI domestically produced?

Volkswagen Golf GTI is available in both domestically produced and imported models. The main differences between the imported Golf GTI and the domestically produced Golf GTI are as follows: 1. The transmission equipped in the car is different. The domestically produced Golf GTI is equipped with a 7-speed DSG transmission, while the imported Golf GTI is equipped with a 6-speed DSG transmission. 2. The prices of the imported Golf GTI and the domestically produced Golf GTI are different. The same model of imported Golf GTI is more than 100,000 yuan more expensive than the domestically produced Golf GTI. 3. The imported Golf GTI lacks the DCC system compared to the domestically produced one. The DCC system equipped in the domestically produced Golf GTI is Volkswagen's original electronic controllable adaptive chassis system, which allows the owner to select different chassis tuning according to different needs through the buttons in the car. The imported Golf GTI is not equipped with the DCC system.
14
3
Share

What is the fuel tank capacity of the Mercedes-Benz S300?

The fuel tank capacity of the Mercedes-Benz S300 is 90 liters. Automobile fuel tank capacity: Small cars have a fuel tank capacity of 35-45 liters, while mid-sized cars have a fuel tank capacity of around 55-75 liters. Generally, the fuel tank volume of family cars is about 50 liters. Based on an average fuel consumption of 8L per 100 kilometers, a car can typically travel about 600 kilometers on a full tank under normal conditions. Method for calculating automobile fuel tank capacity: Taking a regular rectangular fuel tank as an example, with a width of 58cm, height of 58cm, and length of 110cm, the tank capacity equals 58 multiplied by 58 multiplied by 110, which equals 370,040 cubic centimeters. Since 1 liter equals 1,000 cubic centimeters, the capacity is approximately 370 liters.
20
5
Share

How to Extract Oil from a Sedan?

Here are the methods to extract oil from a sedan's fuel tank: 1. Drive the car onto a steep slope with the front facing the higher side, positioning the fuel tank at a lower level. 2. After opening the fuel tank cap, prepare a flexible tube and insert it into the fuel tank, extending it to the bottom. 3. You can use your mouth to suck on the other end of the tube, being careful not to ingest gasoline. Alternatively, you can use a flattened empty plastic bottle to simulate the sucking action to draw out the oil. 4. Once the oil starts flowing, place the outlet end of the tube into a container and wait for the gasoline to be extracted from the tank. The tools needed for extracting oil from the fuel tank are as follows: 1. A rubber or plastic tube with a diameter of about 1 centimeter. 2. A piece of metal about 3 centimeters long, along with a Phillips and a flathead screwdriver. 3. Locate the car's relay box, open it, and find the fuel pump relay.
6
0
Share

Where is the air pump relay for the Mercedes GL550 located?

The air pump relay for the Mercedes GL550 is located under the left rear seat. You can access it by manually pulling up the left rear seat, where you will find a fuse box underneath. Function of the air pump relay: Its role is to supply power to the air pump. Generally, a single-cylinder air pump is sufficient for small vehicles, while commercial or off-road vehicles require a high-power, preferably dual-cylinder air pump. As an electrical control device, the relay connects in the circuit to form two types of control systems: the control system (also known as the input circuit) and the controlled system (also known as the output circuit). Working principle of the air pump relay: The power line passes through the contactor and then connects to the relay. The relay's switch controls one of the lines. If the air pump is also three-phase, the remaining two lines do not need relay control and can be directly connected. If any one of the lines lacks power, the air pump will not operate.
3
4
Share

How often should a Teana be serviced?

Generally, it should be serviced every 5,000 kilometers or every six months, whichever comes first. Change the engine oil every 5,000 kilometers, and replace the air filter and oil filter every 10,000 kilometers. Car maintenance can usually be performed according to the manufacturer's instructions, such as changing the engine oil every 7,500 kilometers. For detailed information, please refer to the car's manual. Below is an introduction to car maintenance: 1. Car maintenance refers to the preventive work of regularly inspecting, cleaning, replenishing, lubricating, adjusting, or replacing certain parts of the car, also known as car upkeep. 2. Modern car maintenance mainly includes the engine system, transmission system, air conditioning system, cooling system, fuel system, power steering system, etc. 3. The purpose of car maintenance is to keep the car clean and in good technical condition, eliminate potential hazards, prevent faults, slow down the deterioration process, and extend the service life.
17
1
Share

What is the ground clearance of the Nissan Livina?

The ground clearance of the Nissan Livina is approximately 170 millimeters. The Livina is a model under Dongfeng Nissan. Livina Body Dimensions: The length, width, and height of the Livina are 4249mm (millimeters), 1695mm (millimeters), and 1577mm (millimeters) respectively. The wheelbase of this car is 2600mm (millimeters). Although the Livina is a compact car, it offers a surprisingly spacious interior. Livina Powertrain: The Livina is equipped with a 1.6-liter naturally aspirated engine across the entire lineup. The engine code is HR16DE, with a maximum power output of 91kW and a maximum torque of 153 Nm. The engine reaches its maximum power at 5600 rpm and its maximum torque at 4000 rpm. This engine features C-VTC technology and utilizes an aluminum alloy cylinder head and block.
7
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.