How to Adjust the Front and Rear Seats of the Haval H6?

2 Answers
SanMadelyn
07/25/25 4:53am
Haval H6's front and rear seats can be adjusted using the electric adjustment buttons. The rear seats allow for adjusting the backrest angle. There is a pull ring on both sides of the rear seats; manually pull the ring and then move the seat to adjust the backrest angle. The rear seats cannot be adjusted for height. By using the pull ring on the seats, the rear seats can be fully reclined. The Haval H6 is a flagship model under the Haval brand, positioned as an urban intelligent SUV. It measures 4640mm in length, 1825mm in width, and 1690mm in height, with a wheelbase of 2680mm, offering a spacious interior that surpasses other SUVs in its class and even some joint-venture sedans.
Was this review help?
19
1
Share
DelSavannah
08/10/25 5:31pm
Adjusting the front and rear position of the Haval H6 seat is quite simple, and I often do it myself while driving. There's usually a small lever under the seat, right where your feet can reach it, made of metal. Pull it upward to unlock the seat. Then, lean slightly forward or backward, and the seat will slide to your desired position. Once adjusted, release the lever, and it will lock into place. The key is to find a comfortable spot where your knees aren't too bent, your right foot can easily reach the brake, and your arms are slightly bent when extended on the steering wheel. This way, you won't get back pain from long drives. I recommend practicing a few times when you first get the car to familiarize yourself with the position, so you don't get distracted while driving. Also, make sure the car is parked and stable before adjusting the seat—safety first. Most Haval H6 models have manual seat adjustments, which are quite convenient.
Was this review help?
7
2
Share
Expand All
More Forum Discussions

What transmission does the Mustang EC30 use?

The Mustang EC30 uses a fixed gear ratio single-speed transmission, with a front-engine, front-wheel-drive layout. The body structure is a monocoque design, featuring MacPherson strut independent front suspension and multi-leaf spring rear suspension. The Mustang EC30 is equipped with a permanent magnet electric motor delivering a maximum power of 70kW and maximum torque of 200Nm, with a driving range of 301km. The vehicle dimensions are 4580mm in length, 1730mm in width, and 1825mm in height, with a wheelbase of 2800mm. It offers a trunk capacity of 50 liters and has a curb weight of 1765kg.
9
0
Share

Where is the cabin air filter of Citroen C3XR located?

The cabin air filter of Citroen C3XR is located in the central tunnel next to the left foot of the front passenger seat. The functions of the cabin air filter are: 1. Filtering the air entering the cabin; 2. Absorbing moisture from the air; 3. Keeping the air clean and preventing bacterial growth. Taking the 2020 Citroen C3XR as an example, its body dimensions are: length 4282mm, width 1748mm, height 1557mm, with a wheelbase of 2655mm. The 2020 Citroen C3XR is equipped with a 1.2T turbocharged engine, delivering a maximum horsepower of 136PS, maximum torque of 230Nm, and maximum power of 100kW.
15
1
Share

What are the eligibility criteria for applying for a new energy vehicle license plate in Beijing?

The application conditions for new energy vehicles in Beijing are as follows: 1. Residence in the city; 2. No passenger car registered in the city under the applicant's name; 3. Possession of a valid motor vehicle driving license; 4. No motor vehicles that should be scrapped but have not been deregistered under the applicant's name. Individuals cannot apply for both the conventional passenger car allocation quota and the new energy passenger car quota simultaneously. If an application for the conventional passenger car allocation quota is under review, it must be canceled before applying for the new energy passenger car quota. Once approved, before the 8th of the even-numbered month, applicants can log into the system, enter the user center, click on the "Application Form" in the quota allocation function area, and then click on "Switch Quota Type" to switch directly without the need for re-review.
19
4
Share

What mirror is installed at the front of a car?

At the front of a car, a rearview mirror is installed, whose function is to reflect the situation behind, beside, and below the car, allowing the driver to indirectly see these areas clearly, expanding the driver's field of vision, and enhancing safety during reversing and driving. The adjustment method for car rearview mirrors is as follows: 1. Adjust the horizon image in the left rearview mirror to the center of the mirror; 2. Adjust the image of the left side of the car to occupy one-quarter of the right side of the mirror; 3. Adjust the horizon image in the right rearview mirror to two-thirds of the mirror's height; 4. Adjust the image of the right side of the car to occupy one-quarter of the left side of the mirror.
15
0
Share

Is it necessary to insert a TF card into a dash cam?

A TF card is essential for a dash cam, and its functions include: 1. Recording video images and audio of the entire driving process; 2. Serving as a parking monitor; 3. Providing footage to assist in accident handling. The installation method for a dash cam is as follows: 1. Install the dash cam rearview mirror; 2. Arrange the wiring; 3. Install the camera near the rear license plate; 4. Connect the camera wiring harness to the dash cam. The usage method for a dash cam is: 1. Insert the memory card and press the power button to turn it on; 2. Press the mode button to select among three modes: recording, photo-taking, and preview; 3. Selecting the recording mode will automatically start the recording.
10
3
Share

Will stopping in 3rd gear during Subject 3 test result in point deduction?

Stopping in 3rd gear during Subject 3 test will result in point deduction. Here are the precautions for roadside parking in Subject 3: 1. Speed: The vehicle speed must be slow, properly control the clutch to avoid stalling, and the slow speed facilitates adjusting the distance between the vehicle body and the roadside line. Reduce speed and shift to 2nd gear. 2. Parking: Depress the clutch and brake to stop, engage the handbrake, shift to neutral, and turn off the turn signal. 3. Rearview mirror: Always check the rearview mirror. Even when adding the head-turning observation action, don't neglect the mirror. Failing to check the rearview mirror may lead to point deduction. 4. Head-turning observation: Don't forget to turn your head for observation. Not checking the left rear traffic situation by turning your head before opening the door will also be judged as unqualified.
12
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.