How to adjust the front and rear seats of Haval H6?

1 Answers
VanPresley
07/28/25 2:28pm
Haval H6 seat adjustment methods are as follows: 1. Move the vertical rectangular key back and forth to adjust the backrest; 2. Push the horizontal key forward and backward to adjust the seat front and rear; 3. Move the horizontal key up and down to adjust the seat height; 4. The circular key is used to adjust the inner part of the seat backrest, which is the lumbar support adjustment; 5. The rear seats cannot be adjusted in height, but they can be completely folded down by pulling the loop on the seat. The Haval H6 is a model under the Haval brand, with dimensions of 4640mm in length, 1825mm in width, and 1690mm in height. In terms of safety, the vehicle is equipped with ABS anti-lock braking system, brake force distribution, and brake assist configuration, making driving safer.
Was this review help?
8
2
Share
More Forum Discussions

How to Reset a Malfunctioning Door Lock?

Door lock malfunctioning reset method: First, check whether the door is properly closed. If the door is not properly closed, the door lock will automatically pop up. If the door has been involved in a collision, the impact may have triggered the door sensor, causing the car's computer to mistakenly judge that the door is not properly closed, leading to the door lock malfunctioning. You can go to a 4S shop for inspection and reset. The door lock is also called the central lock. The central lock in the car refers to the switch located on the driver's door, which can simultaneously control the closing and opening of all car doors. The central door lock is mainly composed of the door lock switch, door lock actuator, and door lock controller. Its working principle is to convert electrical energy into mechanical energy, using a motor to drive the gears to open and close the door.
1
2
Share

What is the reason for the abnormal noise during acceleration of the Chevrolet Cruze?

Chevrolet Cruze acceleration abnormal noise is caused by excessive engine carbon deposits, inappropriate engine oil usage, or dirty engine oil. When diagnosing the abnormal noise of the Cruze, it is important to create good auscultation conditions and try to eliminate interference from other noises to avoid affecting the accuracy of the judgment. The Chevrolet Cruze has a length, width, and height of 4666mm, 1807mm, and 1460mm respectively, with a wheelbase of 2700mm. It is equipped with a 6-speed manual transmission and can reach a top speed of 185 kilometers per hour. The vehicle is powered by a 1.5L L4 naturally aspirated engine, with a maximum engine power of 84 kilowatts and a maximum power speed of 6600 revolutions per minute. The driving method uses front-wheel drive.
18
1
Share

Is ACC Adaptive Cruise Control Useful?

ACC adaptive cruise control is useful. It is an intelligent automatic control system that replaces the driver in controlling the vehicle speed, avoiding frequent cancellation and resetting of cruise control. This makes the cruise system suitable for various road conditions. The driver can completely remove their foot from the pedal, focusing only on steering, which reduces fatigue from long-distance driving and provides a more relaxed driving experience. The adaptive cruise control system typically activates when the speed exceeds 25 km/h. When the speed drops below 25 km/h, manual control by the driver is required.
8
1
Share

What does 'auto' mean in a car?

In a car, 'auto' refers to the automatic air conditioning mode. When the automatic air conditioning is turned on, the system will control the air outlet temperature based on the sensors inside the car (providing warm air in winter and cool air in summer). Additionally, the driver can adjust the constant temperature setting to control the air conditioning intensity and fan speed. Normally, there is an 'auto' button on the center console. Pressing this button activates the mode, and the driver can then adjust the constant temperature setting based on their personal comfort level. Car air conditioning is an air regulation device installed in vehicles, capable of cooling, heating, ventilating, and purifying the air inside the cabin. It provides a comfortable environment for passengers, reduces driver fatigue, and enhances driving safety.
3
0
Share

What are the symptoms of a faulty power steering pump in a truck?

Truck power steering pump failure symptoms include stiff steering, heavy steering wheel, poor steering responsiveness, as well as unusual noises and vibrations. To ensure driving safety, it is essential to repair this component promptly to maintain the vehicle's normal handling performance. Power steering pumps are mainly divided into steering power pumps and brake booster pumps. The steering power pump, as the power source for vehicle steering, is the 'heart' of the steering system. The brake booster pump is a large-diameter vacuum chamber with a diaphragm (or piston) containing a push rod inside, dividing the chamber into two parts: one part is connected to the atmosphere, and the other part is connected to the engine intake pipe through a pipeline.
9
1
Share

How to Clean a Car Fuel Tank?

Car fuel tank cleaning methods are: 1. Cleaning the fuel tank is mainly divided into internal and external parts. First, inspect the fuel tank, then use a filter bucket to siphon out the fuel. Next, insert a cleaned plastic tube into the bottom of the fuel tank and gently blow to stir the fuel at the bottom, achieving the purpose of cleaning through agitation; 2. Use a clean cloth to block the fuel filler pipe, then proceed with cleaning. Avoid rubbing against the fuel level sensor as much as possible. After rinsing, drain the fuel, at which point impurities will flow out together. Although the fuel tank is in a semi-sealed state, as the car ages, sediment and impurities will accumulate more and more, which can cause damage to the car over time. Therefore, car owners need to clean the fuel tank.
13
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.