How to Adjust the Drive Shaft of Jetta?

1 Answers
ValentinaRose
07/24/25 8:47am
Jetta drive shaft adjustment method is as follows:1. Secure the front wheels of the car with chocks and jack up the middle and rear drive axle on one side of the car. 2. Start the engine, engage the high gear, and observe the vibration of the drive shaft. 3. During observation, if the vibration significantly increases when the speed decreases, it indicates that the drive shaft is bent or the flange is tilted, and adjustments should be made according to the degree of tilt. The following is a related introduction to the drive shaft: 1. The drive shaft is a high-speed, minimally supported rotating body. Generally, drive shafts undergo dynamic balance testing before leaving the factory and are adjusted on the balancing machine. 2. For front-engine, rear-wheel-drive vehicles, the drive shaft transmits the rotation from the transmission to the main reducer. It can consist of several sections connected by universal joints. 3. The drive shaft is an important component in the automobile transmission system that transmits power. Its function is to work together with the gearbox and drive axle to transmit the engine's power to the wheels, generating driving force for the car.
Was this review help?
13
3
Share
More Forum Discussions

Is the Shadow e a Pure Honda Product?

Shadow e is a pure Honda product. Below is the relevant introduction of Shadow e: 1. Engine: This engine is Honda's latest designed and developed single-cylinder four-stroke engine, equipped with Honda's newly designed PGM-Fi system. The engine's maximum power and maximum torque reach 5.4KW and 8.16NM respectively, with an actual displacement of 108cc, adopting an air-cooled cooling method. 2. Body Design: The overall dimensions of Shadow e 110 are length × width × height 1820 × 690 × 1090mm, making it more compact than standard scooter models. The minimum ground clearance is 110mm, meeting urban riding standards. With a wheelbase of 1238mm and a body weight of only 105kg, it offers highly flexible handling, suitable for navigating complex urban traffic. 3. Power Performance: In terms of power performance, Shadow e 110 is equipped with a single-cylinder four-stroke engine jointly developed by Sundiro and Honda, with an actual displacement of 108cc, matched with the 5th generation PGM-FI electronic fuel injection system, and meets the National IV emission standards. The maximum power is 5.5/7000kw/rpm, and the maximum torque is 8.16/6000N·m/rpm. The engine features a dual throttle line design, ensuring stable output. Additionally, after the fuel injection upgrade, the power test shows a combined fuel consumption of 1.89 liters per 100 kilometers, with a top speed of around 89km/h.
18
1
Share

Can you shift directly from D to S while driving an automatic transmission car?

Automatic transmission cars can shift directly from D to S while driving. Automatic transmission typically refers to the car's automatic gear-shifting mechanism, where the control system of the automatic transmission selects the appropriate gear based on engine speed and load during driving. Automatic transmission cars are equipped with: Park P, Reverse R, Neutral N, Drive D (also known as forward gear), Sport mode S, and Low gear L. The engine power in an automatic transmission car is transmitted through the gearbox, which uses planetary gear mechanisms for shifting. It automatically shifts gears based on the degree of throttle pedal pressure and changes in vehicle speed. When starting an automatic transmission car, the brake pedal should be pressed, the handbrake should be released after shifting, and the throttle pedal should be gradually pressed after the car starts moving slowly.
8
5
Share

Where is the frame number of the Jiangling Baodian located?

The frame number of the Jiangling Baodian is located between the right front door and the right rear door, and you need to crawl under the vehicle to see it. The Jiangling Baodian is a pickup truck model produced by Jiangling Isuzu Automobile Co., Ltd. It is equipped with a diesel version JX493Q14JB1 diesel engine and a gasoline version Mitsubishi electronic fuel injection engine, using a five-speed mechanical standard transmission. The maximum power of the Jiangling Baodian's engine is 3600 kilowatts, the maximum torque is 204.5 Nm, the top speed is 120 kilometers per hour, the vehicle weight is 2475 kilograms, and the body dimensions are 4975mm in length, 1690mm in width, and 1710mm in height.
19
1
Share

How to drive the Haval H2s with dual-clutch transmission?

Haval H2s dual-clutch transmission operation method is: 1. Press the brake and start the ignition; 2. Shift from P gear to D gear; 3. After shifting to D gear, release the brake and press the accelerator. The driving method of dual-clutch transmission is the same as that of ordinary automatic transmission cars. The dual-clutch is controlled by computer and does not require manual control. The dual-clutch only speeds up the gear shifting and eliminates the power transmission stagnation during clutch engagement. Taking the Haval H2s 2018 Red Label 1.5T Manual Fashion model as an example, it is equipped with a 1.5T 150 horsepower L4 turbocharged engine, matched with a 6-speed manual transmission. Its body dimensions are 4195mm in length, 1772mm in width, 1638mm in height, and the wheelbase is 2550mm.
7
1
Share

Does prolonged half-clutch engagement damage the clutch?

Prolonged half-clutch engagement can indeed damage the clutch. It increases wear on the clutch disc and may lead to its failure, so it's advisable to avoid prolonged half-clutch operation. While manual transmission vehicles require half-clutch engagement during gear shifting and starting, drivers should be mindful of its frequency. The clutch disc is a wear-prone component that requires periodic replacement. When severely worn, the clutch disc loses its tight engagement capability, resulting in clutch slippage during driving. To replace the clutch disc, technicians must first separate the transmission from the engine and then remove the transmission from the vehicle - this is the only proper procedure for clutch disc replacement. Maintaining proper driving habits can significantly extend the clutch disc's service life.
12
1
Share

What are the precautions after car window tinting?

Precautions after car window tinting are: 1. Do not open the side windows within 24 hours after tinting; 2. Within three days after tinting, avoid washing the windows with water to prevent the film from peeling off due to moisture; 3. Within 15 days after tinting, try not to directly attach or hang items on the film to avoid creating gaps when removing suction cups or adhesives; 4. In winter, avoid rolling down the windows or washing the car for a week after tinting; 5. If bubbles appear at the edges of the film, visit the installation site for repairs within 24 hours. After this period, the adhesive around the bubbles will dry, making the edges irreparable.
9
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.