How to adjust the distance between the car body and the sideline?

2 Answers
McHayden
09/07/25 6:00am
The one-third division method for the front of the car typically involves dividing the car into three equal parts, aligning the one-third point of the front with the right sideline and proceeding forward. Align the highest point of the wiper with the sideline to move forward. Another easily identifiable reference point is aligning the notch of the wiper with the sideline to proceed. By observing the small mirror, if the car body appears to be closely touching the right edge line, the actual distance between the car body and the right edge line is 30 centimeters.
Was this review help?
6
2
Share
EmilianoAnn
09/19/25 5:13am
I've been driving for over a decade, and getting too close to the roadside line is common—it's all about using the mirrors to judge. When parking, first slow down, check the rear wheel position in the rearview mirror. If it's too far from the line, steer slightly left to get closer; if too near, reverse a bit and readjust. Parallel parking is the easiest: start with the car parallel to the curb, make slight steering adjustments to slowly approach, and stop when the wheels touch the line in the mirror. SUVs are wider than cars, so leave more room to avoid scraping the rims. Practice in an empty parking lot—a few tries and you'll get the hang of it, saving your tires and stress. Keep the speed low, avoid distractions like phones, and prioritize safety. Long-term misalignment can accelerate tire wear, so check tire pressure and alignment regularly.
Was this review help?
8
3
Share
Expand All
More Forum Discussions

Where is the power supply of the dash cam connected?

Dash cam power connection depends on the power type: 1. Built-in power connects to the ACC power in the fuse box; 2. External power connects to the cigarette lighter socket. A dash cam is an instrument that records images, sounds, and vehicle condition information during driving. The functions of a dash cam include: 1. Preventing fraud attempts; 2. Providing evidence in traffic accidents; 3. Recording driving life; 4. Having navigation functions. The usage method of a dash cam is: 1. Power on/off: Long press the power button to turn the dash cam on/off. It automatically powers on when connected to a charger and delays 5 seconds to power off when disconnected; 2. Video mode: Automatically enters recording state after powering on, press OK button to stop.
16
1
Share

What type of engine oil should be used for the Levin 1.2t?

The Levin 1.2t should use 5w30 engine oil. The functions of engine oil are: 1. Cooling and temperature reduction; 2. Sealing and leak prevention; 3. Cleaning; 4. Shock absorption; 5. Lubrication to reduce wear; 6. Rust and corrosion prevention; 7. Protection of components. The maximum horsepower of the Levin 1.2t engine is 116ps, the maximum power speed is 5200 to 5600rpm per minute, and the maximum torque speed is 1500 to 4000rpm per minute. The Levin 1.2t is a compact car under GAC Toyota, with body dimensions of: length 4640mm, width 1780mm, height 1455mm, and a wheelbase of 2700mm.
12
1
Share

What brand is the Arrizo GX audio system?

Arrizo GX audio system is from Panasonic. The audio system is designed to alleviate the monotony of travel for drivers and passengers with its radio and playback functions. Taking the 2019 Arrizo GX manual Jinshe version as an example, it is a compact car under the Chery brand, with body dimensions of 4710mm in length, 1825mm in width, 1490mm in height, a wheelbase of 2670mm, and a fuel tank capacity of 48 liters. The 2019 Arrizo GX manual Jinshe version is equipped with a 1.5L turbocharged engine, delivering a maximum horsepower of 156PS and a maximum power speed of 5500rpm.
7
1
Share

How to reset the maintenance light on the JAC Refine S3?

Method to reset the maintenance light on the JAC Refine S3: When the wrench indicator on the dashboard is resetting, press and hold the black knob on the dashboard, turn the ignition key three times to the second position (without starting the vehicle), and the light will be reset. If it's time for maintenance, try not to delay it. The first maintenance for the JAC Refine S3 is at 5,000 kilometers. Car maintenance mainly includes the engine system, transmission system, air conditioning system, cooling system, fuel system, power steering system, etc. The body dimensions of the JAC Refine S3 are 4325 mm in length, 1765 mm in width, and 1660 mm in height. In terms of power, the mass-produced JAC Refine S3 is equipped with a 4GB1.5L engine, with a maximum torque of 146 Nm and a low-end torque of 100 Nm. In terms of transmission, the engine is matched with either a 6MT or a CVT gearbox.
8
2
Share

What is the correct method for starting and parking an automatic transmission car?

Automatic transmission car starting and parking correct methods are: 1. Insert the key and shift to P gear, press the brake and shift to N gear to start, shift from N gear to D gear, then release the handbrake and foot brake to start; 2. When parking, slow down and press the brake, shift to N gear and turn off the engine, pull the handbrake, release the foot brake and wait for the car to stop completely, then shift to P gear. The gears of an automatic transmission car are: 1. P is the parking gear and starting gear, used for long-term parking; 2. R is the reverse gear, used for reversing; 3. N is the neutral gear, used for short-term parking; 4. D is the drive gear, also called the forward gear, used for smooth forward movement of the vehicle; 5. L is the low gear, used for downhill or uphill driving; 6. S is the sport mode, used for overtaking to obtain stronger power; 7. M is the manual mode, which can be adjusted for manual driving.
13
5
Share

What are the symptoms of a torque converter failure in an automatic transmission?

There are many manifestations of transmission failure issues, such as transmission noise, transmission slippage, transmission oil leakage, etc., which need to be addressed based on the actual situation. Details of the fault causes are as follows: Transmission slippage: While driving, when accelerating, you can hear the engine racing. Transmission oil leakage: Oil leakage can lead to insufficient lubrication inside the transmission. Transmission jerking: The impact, vibration, and jerking sensation during gear shifting are relatively strong. Transmission noise: When the car is idling, driving, or under high-load driving conditions, abnormal noises or even loud noises from the transmission can be heard.
12
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.