How to adjust the date on the new Mondeo?

1 Answers
Duarte
07/25/25 7:06am
After turning on the car, press and hold the CLK button for about 5 seconds until the time display starts flashing on the screen. Then use the adjustment buttons (turn left to decrease, turn right to increase) to set the date. Below is relevant information about the Mondeo: 1. Exterior: The Mondeo Intelligent Control Edition features redesigned grille, front fog lights, and wheels. The grille adopts a mesh pattern, and chrome trim has been added to the taillights to enhance premium feel and sportiness, while other parts remain largely unchanged. 2. Features: The Intelligent Control Edition adds Baidu Carlife and Parking Fresh Air functions. Additionally, the Intelligent Control Luxury trim includes ACC Full-Speed Adaptive Cruise Control, LKA Lane Keeping Assist, Intelligent Brake Protection (with pedestrian detection), and Automatic Parking Assist. 3. Powertrain: The new model is equipped with 1.5T and 2.0T high/low-power turbocharged engines, delivering maximum power outputs of 181 hp, 245 hp, and 204 hp respectively, with peak torque of 240 N·m, 350 N·m, and 350 N·m; paired with a 6-speed automatic transmission.
Was this review help?
14
2
Share
More Forum Discussions

What is the fuel tank capacity of the Senova X35?

The fuel tank capacity of the Senova X35 is 46L. Below are the relevant details: Configuration: The engine model is A151, with a displacement of 1.5L (1499mL), naturally aspirated intake, inline L-type cylinder arrangement, 4 cylinders, 4 valves per cylinder, compression ratio of 10.5, DOHC valve train, aluminum alloy cylinder head and block, and a maximum horsepower of 116Ps. Precautions: The fuel tank storage location must be safe to prevent fires. The fuel tank or fuel barrel should be placed separately in a visible area, appropriately far from the diesel generator set, and smoking is strictly prohibited.
2
3
Share

How to Deal with Car Window That Won't Close in an Emergency?

Hold the window switch up for more than 3 seconds after the window reaches the top, then release and immediately press and hold the switch down to lower the window completely for more than 3 seconds. Insert chopsticks wrapped in a wet towel into the window guide channel, then vigorously move them up and down to clean until no more dirt comes out. After cleaning the guide rails, apply some lubricating oil. Spraying dashboard wax or applying talcum powder on the window seals can also help with lubrication. If the window cannot close due to aging or deformation of the rubber seal, replacing the new sealing strip will solve the problem.
11
3
Share

What to Do When the Landwind X5 Fails to Start and the Anti-Theft Light Keeps Flashing?

First, open the driver's side door of the car, enter the vehicle, adjust your seating position, and prepare to start the car. Press down on the car's brake pedal to prepare to start the engine. Do not rush this action. Press the car's one-touch start button. Wait for all the dashboard lights to illuminate, indicating that the car's engine has started, then proceed with the next steps. Hold down the lock button on the driver's side door without releasing it. Continue holding for more than 10 seconds to complete the matching process, and the anti-theft light that was preventing the car from starting will turn off.
5
5
Share

How to reset the maintenance light on Changhe Q35?

Changhe Suzuki Q35 maintenance light reset method: 1. With the engine turned off, press and hold the short-distance trip counter reset button located below the tachometer; 2. Turn the ignition switch to the ON position, then release the short-distance trip counter reset button. The display will show the "Service" indicator; 3. Pull out the minute button on the clock and turn it to the right. The mileage display will appear on the screen; 4. Turn off the engine to reset the reminder message. Turn the ignition switch to the ON position again, and the "Service" indicator will disappear, indicating the reset is complete.
7
3
Share

How to Adjust the Height of Corolla Headlights?

You can adjust the headlights using the headlight adjustment knob, which is located in the control area below the left side of the steering wheel. Open the engine hood and locate the adjustment bolt behind the low beam headlight. Before adjusting, set the headlight height adjustment knob to the "0" position. Turn the bolt with one hand while observing the change in the light cutoff position on the wall. If the right light is too high, adjust it according to the left light position until both are at the same height. Mark the normal height cutoff line of the headlight, then make a similar mark in the light beam area of the other headlight before proceeding with adjustments.
15
3
Share

What to Do If a Lead-Acid Battery Gets Water Inside?

Open the battery cover plate and pour out all the internal electrolyte, then let it dry. Generally, a lead-acid battery has six grids. Fill each grid with new electrolyte until full, but try not to overflow too much. Connect the battery in series as before and charge it using a charger. The added electrolyte may boil over and spill out. At this point, use a cloth to wipe away the spilled water until the battery is fully charged and no more water emerges. Unplug the charger and wait about 30 minutes before reattaching the battery's vent caps and cover plate.
8
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.