How to adjust the date on a Citroen C5?

2 Answers
AdrianLynn
07/29/25 6:12am
To adjust the time on a Citroen C5, follow these steps: 1. Press the MENU button on the center console; 2. After entering, there will be a settings option in the upper left corner of the MMI display; 3. Press the corresponding MMI control panel button to enter; 4. Once inside, use the up and down buttons on the steering wheel to adjust the time; 5. Exit after adjustment. Here are some details about the Citroen C5: 1. The Citroen C5 has a body size of: length 4825 mm, width 1860 mm, height 1480 mm. 2. It is equipped with a 1.6T turbocharged engine, with a maximum power of 123 kW and a maximum torque of 245 Nm, paired with a 6-speed automatic transmission.
Was this review help?
20
3
Share
LeIker
08/12/25 9:19pm
I used to drive a Citroën C5, and adjusting the date isn't actually difficult. First, you need to sit in the driver's seat without starting the engine, turn the key to the ACC position to light up the dashboard. Look for the menu button on the left side of the steering wheel or near the instrument panel, usually with a small house icon. Hold it down for a few seconds to enter the setup mode. Then use the up and down arrow keys to scroll to the 'Time & Date' option, adjusting the year, month, and day one by one. The confirm button is usually the middle 'OK' button. Don't forget to exit and save the settings after adjustment. I recommend checking the owner's manual for details, as operations may slightly differ between different model years like the 2008 or 2015 versions—for example, older models might require pressing the volume knob simultaneously to switch. Regularly adjusting the date is important to prevent erratic jumps, especially during seasonal changes when it might affect the accuracy of the dashcam. Such minor maintenance can avoid distractions while driving and ensure driving safety.
Was this review help?
18
4
Share
Expand All
More Forum Discussions

How to Check the Total Mileage of a Car?

The total mileage of a car is usually displayed on the dashboard. To check other information such as average fuel consumption or remaining range, press the left button on the dashboard several times. To verify the actual mileage of a car, you can check the maintenance records at a 4S store, use an OBD computer to read the engine mileage, read the transmission mileage with an OBD computer, observe the wear on brake discs, tire wear, and interior wear, among other methods. If maintenance records are unavailable or the car hasn't been serviced at a 4S store, you can use an OBD diagnostic tool to read the car's data and check the engine and transmission mileage. This method is quite common. However, some car computers are highly restricted or require specialized OBD tools for reading, making it impossible to check the mileage with a standard OBD computer. In such cases, you can only rely on experience to estimate the mileage.
3
3
Share

What is the width of the Envision in meters?

The width of the Envision is 1839mm. Below are the detailed specifications of the Envision: 1. Powertrain: Available in 1.5T and 2.0T engine options, each with both front-wheel drive and all-wheel drive models. The 1.5T is paired with a 7-speed dual-clutch transmission, while the 2.0T comes with a 6-speed automatic transmission. 2. Features: Equipped with HID auto-sensing headlights, LED daytime running lights, an aluminum roof rack, and 19-inch large aluminum alloy wheels. The interior features a dual-tone color scheme with marble-patterned trim on the dashboard. The cabin is illuminated with blue ambient lighting, and the Buick Envision also comes with a panoramic sunroof.
2
2
Share

Where is the rearview mirror heating switch on the Peugeot 408?

The rearview mirror heating function is usually integrated with the rear windshield defroster button, featuring an icon of a rearview mirror with three wavy lines. Below is relevant information: 1. Peugeot 408: The Peugeot 408 is a compact car launched by Dongfeng Peugeot on January 25, 2010, equipped with mainstream engines from DPCA, offering two displacement options: 2.0L and 1.6L. The introduction of the Peugeot 408 significantly expanded Dongfeng Peugeot's product lineup in the 1.6L-2.0L golden displacement market. 2. Model Introduction: This CVTS-II engine delivers a maximum power of 108KW/6000rpm and a maximum torque of 200N.m/4000rpm, which is essentially the same as the 2.0L engine in the current 307 model. While there appear to be no major changes, incorporating more new technologies into a mature powertrain reflects Dongfeng Peugeot's stable and cautious approach.
5
1
Share

How to Adjust the Valves of a Five-Cylinder Engine?

Five-cylinder engine valve adjustment method: First, slightly loosen the lock nut on the rocker arm, then use a screwdriver to turn the adjustment screw as needed—turning it downward reduces the clearance, while turning it upward increases the clearance. Adjust until the rocker arm and valve are in contact with the feeler gauge but can still move slightly. Then, hold the adjustment screw in place with the screwdriver and tighten the lock nut. Next, move the feeler gauge and rotate the crankshaft for rechecking until all valve clearances are correctly set. Car valves, also known as throttle valves, are responsible for delivering fuel into the engine and expelling exhaust gases. Traditional engines have only one intake valve and one exhaust valve per cylinder. This design is relatively simple, easy to maintain, and performs well at low speeds. However, its drawback is difficulty in increasing power, especially at high speeds where the air intake efficiency is low and performance is weaker. To improve intake and exhaust efficiency, multi-valve technology is now commonly adopted.
1
2
Share

Where is the charging port on a Porsche?

The charging port on a Porsche is located in the middle of the rear seats. Taking the Porsche Panamera as an example, here are the specific details: 1. Powertrain: The Panamera's 2.9-liter twin-turbocharged engine has a maximum torque of 450 Nm. This engine features direct fuel injection technology and uses an aluminum alloy cylinder head and block, paired with an 8-speed dual-clutch transmission. The 4.0-liter twin-turbocharged engine has a maximum torque of 620 Nm, also paired with an 8-speed dual-clutch transmission. 2. Suspension type: The Porsche Panamera uses a double-wishbone independent suspension at the front and a multi-link independent suspension at the rear.
2
4
Share

In which year did the Elantra begin domestic production?

In 2003, the domestically produced Elantra was officially launched, which is the most familiar Elantra model to the majority of car enthusiasts. Below is the relevant introduction: Below is the introduction about the Elantra: Dimensions: The Elantra is a typical Korean car, with a length, width, and height of 4495mm, 1720mm, and 1425mm respectively. As Hyundai's best-selling model overseas, it has gone through six generations. Exterior: The Elantra's "Korean heritage" is immediately apparent from its exterior. The entire body appears gentle and refined, but the redesigned front face gives it an aggressive look. Two thick ridges on the engine hood extend forward to the small yet prominent radiator grille, creating a strong sense of forward motion. Interior: The Elantra's interior lines are relatively simple, with a beige color scheme that appears very fresh. The center console and door armrests are accented with matte metal-finish panels, giving it a very stylish appearance.
17
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.