How to Adjust the Dashboard Time on Peugeot 508?

What is the Function of the Clutch?

The clutch serves to gradually engage the engine with the drivetrain, ensuring smooth vehicle startup. Below are detailed explanations of the clutch's functions: 1. The clutch is located inside the flywheel housing between the engine and the transmission. The clutch assembly is secured to the rear plane of the flywheel with screws, and the clutch output shaft serves as the transmission input shaft. During driving, the driver can press or release the clutch pedal as needed to temporarily disconnect or gradually engage the engine with the transmission, thereby cutting off or transmitting the engine's power to the transmission. 2. The clutch allows the engine to disengage from the drivetrain, enabling gear shifting in the transmission. Then, by gradually releasing the clutch pedal, the clutch engages progressively. During this engagement process, the resistance torque on the engine increases gradually. Therefore, the accelerator pedal should be pressed simultaneously to gradually increase the fuel supply to the engine, maintaining the engine speed at the minimum stable level without stalling. 3. As the clutch engagement tightens progressively, the torque transmitted from the engine to the drive wheels via the drivetrain increases gradually. Once the traction force is sufficient to overcome the starting resistance, the vehicle begins moving from a standstill and accelerates progressively.

5

2

Share

How Long Does It Take to Replace a Front Bumper?

Replacing a car's front bumper typically takes about an hour. Below is an introduction to the process of replacing a car's front bumper: 1. If the car's bumper has been pre-painted, the installation process takes approximately one hour. The car bumper, also known as the car's crash beam, is located in most areas of the front and rear of the vehicle. The bumper is designed to reduce injuries to passengers during high-speed collisions. Front and rear bumpers not only serve a decorative function but, more importantly, protect the car body and ensure the safety of passengers inside the vehicle. 2. The bumper also has certain aerodynamic effects, helping to reduce wind resistance during driving. 3. With the continuous development of the automotive industry, engineering plastics are increasingly being used in car manufacturing. Nowadays, both front and rear bumpers are made of plastic. The use of plastic bumpers aims to achieve a harmonious and unified car design while also contributing to the lightweight design of the vehicle.

2

Share

How to Turn On Cruise Control in ATS-L?

The Cadillac ATS-L's cruise control can be activated using the buttons on the left side of the multifunction steering wheel. Below is an introduction to the cruise control function: 1. The cruise control system is suitable for use on highways. Once the system is activated, the driver only needs to set the speed and does not need to continuously press the accelerator pedal. 2. Some vehicles are equipped with an adaptive cruise control system, which is more advanced than the standard cruise control system. Cars with adaptive cruise control have a distance-measuring radar located below the front bumper. This radar can detect the distance to the vehicle ahead and will automatically reduce speed if the distance becomes too close. 3. Some vehicles with adaptive cruise control also feature an automatic follow function, which is very practical in traffic jams, as the driver does not need to frequently press the brake or accelerator pedals. 4. If you are unfamiliar with how to use the car's cruise control system, you can carefully read the car's instruction manual or user guide.

15

3

Share

How to Top Up an ETC Credit Card?

ETC credit cards do not require top-up. The ETC credit card mainly allows overdraft spending similar to a credit card. After the billing date, the bank will issue a statement, and repayment can be made through various online channels. Below are some precautions for using ETC: 1. Disable the small-amount quick payment feature. It is recommended to turn off the "small-amount quick payment" feature, as disabling it will not affect highway access. Car owners only need to call the card-issuing bank's customer service hotline and request the customer service representative to disable the dual-free feature. 2. For cards with quick payment enabled, do not leave the ETC card in the car. Remove the card immediately after exiting the vehicle and carry it with you. When carrying the card, place it between thick layers of clothing or in a bag to prevent unauthorized transactions. 3. Enable SMS notifications. ETC credit card users should activate the SMS reminder feature to conveniently track transaction times and amounts.

6

3

Share

Reasons for Brake Pedal Vibration When Braking

When experiencing brake pedal vibration during braking, first exclude a normal phenomenon where the ABS system causes pedal rebound during emergency braking. On slippery roads, the ABS anti-lock system activates, resulting in pedal vibration—this is normal. If confirmed as a malfunction, inspect whether brake discs/pads are severely worn or if runout exceeds tolerance, requiring measurement and replacement of faulty components. Below are explanations for brake pedal vibration during braking: 1. For manual transmissions, slight vibration in both brake and clutch pedals under high-torque low-gear conditions is normal. 2. For automatic transmissions, pedal vibration when stopped in D gear (e.g., at traffic lights) is normal; shifting to N or P gear eliminates strong sensations. 3. Uneven tire tread wear or inconsistent tire pressure can cause brake pedal vibration. 4. Warped brake discs induce vibration, especially during hard braking—replacement is recommended. 5. If the ABS warning light intermittently illuminates during low-speed braking, verify potential ABS sensor failure. 6. High-speed braking with pedal pulsation and "grinding" noises indicates normal ABS pump operation. 7. Check for resonance caused by loose underbody shield screws.

6

5

Share

What Does 95 on a Tire Represent?

Tire markings 95W represent the load index and speed rating of the tire. The number 95 indicates a maximum load capacity of 690 kilograms, while the letter W signifies a maximum speed of 270 kilometers per hour. Below is an introduction to tire specifications: 1. For example, a Michelin tire marked 245/45R17 95W means 'tire width of 245mm' (where the tread width is measured in millimeters from one sidewall to the other, entirely dependent on the width of the tire rim). The number 45 represents the 'aspect ratio,' which can also be interpreted as 'the tire height is 45% of the tread width.' The letter R stands for 'radial tire,' and 17 indicates a 'rim diameter of 17 inches.' 2. Tires are circular elastic rubber products mounted on various vehicles or machinery to roll on the ground. They are often used under complex and demanding conditions, enduring various deformations, loads, forces, and high or low temperatures during operation. Therefore, tires must possess high load-bearing capacity, traction performance, and cushioning performance. They are also required to have high wear resistance and flex resistance, along with low rolling resistance and heat generation. Half of the world's rubber consumption is used for tire production.

14

0

Share

How to Adjust the Dashboard Time on Peugeot 508?

What is the Function of the Clutch?

How Long Does It Take to Replace a Front Bumper?

How to Turn On Cruise Control in ATS-L?

How to Top Up an ETC Credit Card?

Reasons for Brake Pedal Vibration When Braking

What Does 95 on a Tire Represent?

How to adjust the time on Roewe 350?

What Are the Symptoms of a Bad Shock Absorber?

What Causes the Clicking Sound When Starting and Braking?

What Problems Will Occur If the Antifreeze Is Insufficient?