How to Adjust the Dashboard Time on Lavida?

1 Answers
VanGenesis
07/25/25 5:38am
The method to adjust the dashboard time on Lavida: 1. Press the one-touch start button in the vehicle's central control area to power on the dashboard, otherwise time adjustment is not possible; 2. Press the SET button on the left side of the steering wheel; 3. Use the up/down toggle buttons on the right side of the steering wheel to adjust the vehicle time; 4. Press the OK button on the steering wheel to confirm the adjustments; 5. Observe the dashboard time, which should now display correctly. The Volkswagen Lavida has a body length, width, and height of 4670mm, 1806mm, and 1474mm respectively, with a wheelbase of 2688mm.
Was this review help?
9
2
Share
More Forum Discussions

What does the 'V' on a tire indicate about its maximum speed?

The 'V' on a tire indicates a maximum speed of 240km/h. Here are the relevant details: 1. Meaning of speed rating: The speed rating indicates the maximum speed at which a tire can carry a specified load under defined conditions. 2. Common speed ratings: 'Q' represents 60 km/h, 'R' represents 170 km/h, 'S' represents 180 km/h, and so on. If a tire has no speed marking, unless otherwise specified, it is generally considered to have a maximum safe speed of 120km/h. 3. Precautions: Tires are primarily made of polymer composite materials, and temperature increases can accelerate rubber aging. When a car is driven at high speeds, the temperature of the entire tire rises, leading to increased tread wear. Every tire has a designed critical speed; if used beyond this limit, there is a risk of tire blowout.
14
0
Share

What is the reference point position for curve turning?

When the midpoint of the car hood touches the right yellow line, gradually turn the steering wheel to the left, starting with half a turn. Keep the left corner of the hood aligned with the yellow line. If the left corner is about to go beyond the yellow line, turn the wheel a bit more. If the left corner cannot reach the yellow line, slightly turn the wheel back, making continuous minor adjustments. Below are additional details: 1. Handling method for steering failure: The driver should remain calm, immediately release the accelerator pedal gently, and let the vehicle continue at a low gear while firmly and evenly pulling the handbrake. If the speed decreases significantly, apply the foot brake to bring the vehicle to a gradual stop. If the vehicle is at high speed, especially when the front and rear wheels are not aligned, first use the handbrake to reduce speed, then apply the emergency brake. 2. Causes of body resonance during high-speed driving: Common causes include a twisted or deformed driveshaft, or loose, dry, or rusted universal joints. Since these components are located under the vehicle, they are often overlooked during maintenance. Therefore, during each maintenance session, ensure that the staff applies grease to all applicable parts.
20
3
Share

Is it necessary to buy driver insurance and passenger insurance?

Whether it is necessary to purchase driver insurance and passenger insurance can be decided by the car owner based on their own situation. Below is some information about driver insurance and passenger insurance: 1. Introduction: Driver insurance and passenger insurance can be collectively referred to as vehicle occupant liability insurance, which is used to cover the risk of injury or death to vehicle occupants caused by traffic accidents. Moreover, the premiums for driver insurance and passenger insurance are generally not expensive. If the insurance budget is sufficient, they can be purchased; if deemed unnecessary, they can also be omitted. 2. Situations where it can be purchased: If the traffic conditions in the car owner's area are complex, or the car owner frequently drives on highways or travels to other regions, or often travels with family and friends, and the family and friends do not have insurance products that cover their own traffic accidents, purchasing driver insurance and passenger insurance can provide an additional layer of protection for themselves and their family and friends.
8
3
Share

What to Do When the Car Battery Is Dead and the Car Won't Start?

Here are the solutions for when the car won't start due to a dead battery: 1. Charge the battery. 2. Replace the car battery. 3. Push-start the car: When using this method, be sure to maintain a safe distance. 4. Jump-start the car: When connecting jumper cables, ensure the positive terminal is connected to positive and negative to negative. 5. Towing: Use another vehicle to tow-start the car. Below are the impacts of a dead car battery: 1. It shortens the battery's lifespan; 2. It prevents the car from starting and causes electrical devices inside the car to malfunction; 3. It may cause data loss in the vehicle's control modules during startup, leading to operational issues; 4. It can overheat the starter motor, reducing its lifespan; 5. Prolonged battery depletion can damage the alternator.
8
1
Share

How are car classes divided?

Sedans are classified into A00 class (micro cars), A0 class (subcompact cars), A class (compact cars), B class (mid-size cars), C class (executive cars), and D class (luxury cars). A00 class sedans have a wheelbase between 2 meters to 2.2 meters and an engine displacement of less than 1 liter; A0 class sedans have a wheelbase of 2.2 meters to 2.3 meters and a displacement of 1 liter to 1.3 liters; Generally, A class cars have a wheelbase ranging from about 2.3 meters to 2.45 meters and a displacement of about 1.3 liters to 1.6 liters; B class mid-range sedans have a wheelbase of about 2.45 meters to 2.6 meters and a displacement from 1.6 liters to 2.4 liters; C class premium sedans have a wheelbase of about 2.6 meters to 2.8 meters and an engine displacement of 2.3 liters to 3.0 liters; D class luxury sedans generally have a wheelbase greater than 2.8 meters and a displacement mostly above 3.0 liters. China's vehicle classification standards: The main categories of vehicles in China include trucks, off-road vehicles, dump trucks, tractors, special-purpose vehicles, buses, sedans, and semi-trailers. Trucks are mainly divided into micro trucks, light trucks, medium trucks, and heavy trucks; Off-road vehicles include light off-road vehicles, medium off-road vehicles, heavy off-road vehicles, and ultra-heavy off-road vehicles; Dump trucks include light dump trucks, medium dump trucks, heavy dump trucks, and mining dump trucks; Tractors include semi-trailer tractors and full-trailer tractors; Special-purpose vehicles include box trucks, tank trucks, crane trucks, van trucks, special structure vehicles, and specialized dump trucks.
16
2
Share

What documents are required for 2021 vehicle annual inspection?

For the 2021 vehicle annual inspection, you need to bring the original vehicle license, duplicate of compulsory traffic insurance, and a copy of your ID card. Notes for annual inspection: During the inspection, the vehicle management office will check the vehicle's lights. If the lights are found to be too dim or too bright, the vehicle will be deemed unqualified and will not pass the inspection. If the lights are too dim, check the lighting circuit and whether the bulbs are aged, replacing relevant parts if necessary. If xenon headlights have been installed, it is recommended to restore the original headlights before the inspection to pass the test. Annual inspection procedure: First, after submitting the inspection application, an online inspection will be conducted. Drive the vehicle into the automatic inspection area to sequentially check whether the exhaust, speed, lights, side slip, and chassis meet the standards. All items must pass to proceed. Next is the appearance inspection, verifying the vehicle's license plate, type, body color, engine number, VIN code, and frame number for accuracy. Then inspect the body appearance, checking details such as the bumper, engine compartment, rearview mirrors, lower mirrors, window glass, paint, engine operation status, and the interior and wheels of passenger vehicles. Finally, the owner can obtain the inspection report and application form from the inspector. If all items pass, you can proceed to pay the inspection fee and collect the vehicle license and certification label. If any items fail, the owner must repair them and participate in a re-inspection until all items pass before proceeding with the visa procedures.
9
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.