How to adjust the dashboard time on Fengguang 580?

1 Answers
JakeLee
07/30/25 10:19am
Fengguang 580 dashboard time adjustment method is as follows: 1. When the dashboard speed shows 0, press and hold the 0.0/set button at the lower right of the dashboard, the mileage and time will appear. 2. Press to select and adjust, and it will automatically confirm after a few seconds. Relevant information is as follows: 1. Fengguang 580 is an SUV under Dongfeng, with flexible space, freely switchable between 5-seat and 7-seat configurations. 2. Equipped with a 1.5T engine, the maximum power of this engine is 110kW (150PS)/5600rpm, and the maximum torque is 220N·m/1800-4000rpm. 3. In terms of transmission, the gearbox can be selected as 6-speed manual or CVT. The 1.8L model is the entry-level version of the series, matched with a 5-speed manual gearbox.
Was this review help?
13
1
Share
More Forum Discussions

What is the lifespan of a three-way catalytic converter?

The lifespan of a three-way catalytic converter under domestic standards is approximately 80,000 to 100,000 kilometers of vehicle travel, while abroad it is generally 160,000 to 200,000 kilometers. More relevant information is as follows: 1. The three-way catalytic converter is the most important external purification device installed in the vehicle's exhaust system. It converts harmful gases such as CO, HC, and NOx emitted from vehicle exhaust into harmless carbon dioxide, water, and nitrogen through oxidation and reduction. 2. The failure mode of the three-way catalytic converter is high-temperature deactivation: After the active components sinter at high temperatures, the Al2O3 in the coating converts into Al2O3, which only causes the catalyst in the converter to fail and does not affect the exhaust resistance. Therefore, many times the vehicle owner will not notice until measuring exhaust emissions or during vehicle inspection.
8
1
Share

How to check the oil level in a 2017 A4L?

A4L does not have a dipstick. You can check it through the MMI display by pressing the car button and selecting the oil level. The conditions for checking are as follows: 1. The engine oil temperature must reach above 60 degrees (i.e., after running the car for more than 10 minutes). Turn off the engine, wait for 1 minute, then turn on the ignition to see it. On the display screen, press CAR to view. 2. If the vehicle is low on oil, an oil can-like icon will appear on the dashboard. If this icon does not appear during normal driving, it means no oil needs to be added. When adding oil, ensure the proper amount is used.
3
3
Share

What is the method for adding coolant?

The method for adding coolant and its operational steps are as follows: 1. Tighten the radiator drain switch and fill the radiator with coolant until it overflows. 2. Tighten the radiator filler cap. 3. Fill the engine coolant into the reservoir until the liquid level reaches the full level line. 4. Warm up the engine until the thermostat valve opens. 5. Wait for the coolant to cool down. 6. Remove the radiator filler cap and check the coolant level. Relevant information about coolant is as follows: 1. The full name of coolant is antifreeze coolant. It prevents the engine from freezing in winter and cools the engine when it generates high temperatures during operation, ensuring the vehicle can work normally in various environments. 2. The powerful effects of coolant are composed of various chemical components. Coolant is poured from the reservoir. Front-engine family cars generally require about 3-4 liters of coolant, while for mid-engine or rear-engine cars, since they still need a radiator located at the front of the car to dissipate heat for the cooling system, due to the overall layout, these cars require at least twice the amount of coolant compared to front-engine cars.
3
4
Share

Why is there only one reversing light?

The reasons why a car has only one reversing light are as follows: 1. National regulations mandate that vehicles under 6 meters in length must be equipped with at least one reversing light, with the option to install an additional one. Many manufacturers choose to omit the second reversing light while still complying with the regulations. 2. A single reversing light is more noticeable to drivers, as symmetrical lighting can cause confusion, making drivers mistakenly perceive an oncoming vehicle as driving in reverse. Typically, the left side features the fog light while the right side has the reversing light. This setup is designed because the driver's seat is on the left, allowing better visibility of vehicles ahead with the left fog light, and the right reversing light facilitates easier nighttime reversing and parking on the right side of the road.
11
5
Share

How many cylinders does the Emgrand engine have?

Geely Emgrand is equipped with a four-cylinder engine. The new Geely Emgrand adopts a 1.5L naturally aspirated engine, which is the JLγ-4G15 model engine independently developed by Geely. The maximum power is 109 horsepower/6000rpm, and the peak torque is 140 N·m/4400rpm, paired with a 5-speed manual transmission. More details are as follows: 1. The Emgrand's 1.5L JLγ-4G15 engine is independently developed by Geely and equipped with DVVT intelligent variable valve timing technology for both intake and exhaust. Its peak power reaches 80Kw, ranking among the top performance parameters among domestic engines. 2. The power output of the 1.5L naturally aspirated engine is quite responsive and intelligently tuned, just meeting the needs of daily commuting. With ample low-end torque, this design provides a light and agile driving feel in urban environments. 3. The throttle pedal is very light, with almost no damping sensation, which may cause foot fatigue during long drives. The gearshift has a relatively long travel, but gear engagement is smooth and effortless, making it one of the few well-functioning manual transmissions among Chinese brands.
16
2
Share

How to Deal with Water Under the Floor Mats of an Audi A6?

Audi A6 floor mats under the water treatment method is as follows: 1. If there is water under the vehicle floor mats or inside the car, it must be dealt with in time to prevent water from entering under the floor mats or carpets. 2. According to the severity of the water ingress, remove all seats in the cabin. Remove the floor mats, carpets, and other components. Deal with the water inside. Dry the carpets and floor mats thoroughly. 3. Replace the damaged control units. For electrical wiring that has been exposed to water, it must be cleaned to remove moisture and humidity. 4. While dealing with the water under the floor mats, be sure to check how the water entered the car. Common causes of leakage include: 1. The sunroof itself has leaks and is not sealed properly; 2. The sunroof drain holes are blocked or detached, causing water to not be drained out of the car; 3. The vehicle drove through a waterlogged area, and the deep water entered the car; 4. The front pressure chamber drain holes of the vehicle are blocked; 5. The body sealing is not tight.
18
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.