How to adjust the dashboard time for the 2013 GLK300?

What is the standard for belt tension?

Belt tension can be roughly judged by hand pressing. The inspection method is very simple: use your thumb to forcefully press the belt between two pulleys with a pressure of about 10kg. If the belt depression is around 15mm, the belt tension is considered just right. Additional information is as follows: 1. Due to the elasticity of the belt, it can cushion impact, reduce vibration, and ensure smooth transmission, but it cannot maintain a strict transmission ratio (the ratio of the driving pulley's revolutions per minute to the driven pulley's revolutions per minute). When the transmission encounters obstacles or overload, the belt will slip on the pulley, thus preventing damage to the machinery. 2. Belt transmission is simple, cost-effective, easy to maintain, and convenient to replace. However, due to belt slippage on the pulley, the mechanical efficiency of belt transmission is low, and the belt itself has poor durability. Over time, it will gradually stretch, so adjustments should be made as needed.

4

3

Share

Why does the car make a clunking sound while driving?

The reasons for the clunking sound in the car are as follows: 1. Small stones are stuck in the tire tread. 2. Check the wheel hub bearing of the car, as lack of lubricating oil can cause abnormal noise. 3. After parking, check the inner side of the tire that is making the noise to see if there are any components, parts, or wiring harnesses interfering with the moving tire, wheel hub, or brake disc. If so, eliminate the interference. Additional information is as follows: 1. Tires are circular elastic rubber products mounted on various vehicles or machinery for ground rolling. Tires are often used under complex and harsh conditions, enduring various deformations, loads, forces, and high and low temperature effects during driving.

17

5

Share

What is the size of a 185 tire in inches?

Commonly, a 185mm tire width is typically paired with 14 or 15-inch rims. Below is a detailed explanation of the letters and numbers in a tire (using 175r14 as an example): 1. 175: The number 175 indicates that the tire's cross-sectional width is 175mm; 75 represents the aspect ratio of the tire as 75%. 2. r: The letter r signifies that the tire has a radial structure. 3. 14: The number 14 indicates that the tire is suitable for a rim diameter of 14 inches. 4. C: The letter C denotes that the tire is a reinforced type. 5. OUTER-SIDE: The term OUTER-SIDE indicates the rotation direction of the tire.

8

3

Share

What are the standards for oversized height and length of pickup trucks?

For large freight vehicle trailers and large tractor trailers carrying goods, the height from the ground must not exceed three meters, the width must not exceed the width of the carriage, the front end of the length must not extend beyond the carriage, and the rear end must not extend more than one meter beyond the carriage. Additional information is as follows: 1. Handling consignment: When processing consignment procedures, in addition to complying with general regulations, the consignor must submit a goods description and specific requirements for loading, unloading, and reinforcement. Under special circumstances, a transport permit must also be obtained from the relevant authorities. The carrier should review the information provided by the consignor, understand the specific characteristics of the goods, select an appropriate vehicle, and only proceed with the consignment procedures once safe transport conditions and capabilities are confirmed. 2. Consignment requirements: Based on the external dimensions and weight of the oversized goods, the carrier should, before departure, jointly inspect the operation site and route with the consignor to assess the road conditions and the capacity of bridges and culverts along the way, and develop a transport organization plan. If other departments are involved, prior application and approval must be obtained from the relevant authorities before departure.

19

2

Share

How to Handle Drunk Driving of Motor Vehicles?

You need to go to the vehicle management office where the car was impounded or the traffic management department of the public security organ to handle the matter, and accept penalties based on different drunk driving methods. The minimum penalty is a six-month suspension of the motor vehicle driver's license, while severe penalties include revocation of the motor vehicle driver's license and a lifetime ban from obtaining a motor vehicle driver's license.

7

3

Share

What does 300t mean in cars?

300t in cars is a new naming convention, where 300 represents the torque rating. For example: 300TSI means the vehicle is equipped with a TSI engine that has a torque rating of 300N.m. Additional information is as follows: 1. Volkswagen's new naming convention will use the torque rating in Newton-meters + engine technology type, resulting in 6 possible names: 180, 230, 280, 300, 330, and 380, corresponding to current engine displacements such as 1.4L, 1.8L, and 2.0L. For example: 280TSI means the vehicle is equipped with a TSI engine that has a torque rating of 280Nm. 2. Engine displacement, a specialized term in hydraulic transmission, refers to the volume of fluid intake or exhaust per stroke or cycle. In China, the classification of passenger car levels is determined by engine displacement size.

15

1

Share

How to adjust the dashboard time for the 2013 GLK300?

What is the standard for belt tension?

Why does the car make a clunking sound while driving?

What is the size of a 185 tire in inches?

What are the standards for oversized height and length of pickup trucks?

How to Handle Drunk Driving of Motor Vehicles?

What does 300t mean in cars?

Should the Transmission Fluid of a Flood-Damaged Car Be Replaced?

What Type of Fuel Should a Pickup Truck Use?

Analysis and Troubleshooting of Low Oil Pressure in EA888 Engine

Which of the Two Car Keys is the Master Key?