How to Adjust the Dashboard of the New Nissan Qashqai?

Is It Embarrassing for Lynk & Co to Use 95 Octane Gasoline?

According to the official vehicle manual recommendation, Lynk & Co should use 95 octane gasoline. In addition to checking the appropriate gasoline grade in the vehicle manual, Lynk & Co owners can also find this information on the fuel tank cap, which is usually labeled. Typically, the gasoline grade can also be determined based on the engine's compression ratio. Vehicles with an engine compression ratio between 8.6-9.9 should use 92 octane gasoline, while those with a compression ratio between 10.0-11.5 should use 95 octane gasoline. However, with the application of new technologies, the compression ratio alone cannot determine the required gasoline grade. Even high-compression engines can be tuned to use lower-octane gasoline. This is because factors other than compression ratio also play a role, such as ignition timing, turbocharging technology, and Atkinson cycle technology. Generally, the higher the gasoline octane number, the higher the octane value and the better the anti-knock performance. 92 octane gasoline contains 92% isooctane and 8% n-heptane, while 95 octane gasoline contains 95% isooctane and 5% n-heptane. If a Lynk & Co vehicle occasionally uses the wrong gasoline grade, simply switch back to the correct grade after consumption. However, long-term use of the wrong gasoline grade can have the following effects: For vehicles recommended to use lower-octane gasoline, accidentally using higher-octane gasoline will not cause damage. However, the increased octane value alters the fuel's ignition point, leading to delayed combustion in the engine. This results in reduced engine power and thermal efficiency, with the practical effect being poorer performance. For vehicles recommended to use higher-octane gasoline, using lower-octane gasoline can cause engine knocking. Due to the significantly lower octane value, the gasoline's ignition point decreases, causing premature ignition during the compression stroke. If combustion occurs before the spark plug ignites during the compression stroke, resistance will arise during the upward stroke. This resistance makes the engine run very unstably. If the knocking is imperceptible, it only increases noise without obvious damage to the engine. However, noticeable knocking indicates severe engine conditions, affecting not only driving stability but also causing abnormal wear on pistons and cylinders, and in severe cases, cylinder scoring.

6

3

Share

What Causes Unstable Idle Speed When the Engine is Cold?

Car unstable idle speed during cold start may be caused by air intake system leaks, low fuel pressure, clogged air filter, injector atomization leakage, improper idle adjustment, faulty spark plugs, air flow meter malfunction, etc. Here is a detailed explanation: 1. In cold conditions, the car needs to bring the engine into normal operating conditions as quickly as possible after starting. Therefore, during cold starts, the engine control unit automatically injects more fuel to rapidly increase the engine's water temperature by burning more fuel than normal idle speed, allowing the engine to quickly reach the appropriate temperature. 2. The main manifestation is that the engine idle speed will be relatively high when cold, generally between 950-1300 RPM. When the engine temperature rises to a certain value, the idle speed will decrease to the normal level. 3. Under normal circumstances, the engine's air intake must be strictly limited. If there are abnormalities or leaks in the intake system, throttle valve, air flow meter, or idle control valve, it may cause unstable engine idle speed. 4. The same applies to the fuel injection system. If the electronic control unit receives incorrect signals and misjudges the car's operating conditions, it may lead to abnormal fuel injection. 5. Additionally, clogged fuel injectors can also cause a decrease in engine power and unstable idle speed.

13

3

Share

Is Cadillac a domestically produced model?

Cadillac is a joint venture vehicle. Cadillac is a luxury car brand from the United States, under the General Motors Group. The Cadillac brand is operated by SAIC General Motors, a joint venture between SAIC Group and General Motors Group. Below is some introduction about the vehicle: 1. Cadillac is a luxury car brand under the General Motors Group. As the only luxury brand under General Motors, Cadillac is gradually accelerating its localization process. 2. For over a hundred years, Cadillac has created numerous firsts in the automotive industry and established countless luxury car industry standards. It can be said that the history of Cadillac represents the history of American luxury cars. 3. Cadillac combines a century of historical essence and the wisdom of generations of designers, making it a leading brand in the automotive industry.

3

Share

What is the tire model for the Bluebird?

The Bluebird has two tire models: 215/50R17 and 195/60R16. The first number 215 indicates the tire width is 215MM, 50 represents the aspect ratio of the tire section is 50%, meaning the section height is 50% of the width. The letter R stands for radial tire, and 17 denotes the rim diameter is 17 inches. The Bluebird has a top speed of 185km/h, accelerates from 0-100km/h in 12.1 seconds, and has a fuel consumption of 5.2L per 100km. In addition to the model, tires also display the following common data: Tire cord material: Indicated by Chinese pinyin, such as M-cotton cord, R-rayon cord, N-nylon cord, G-steel cord, ZG-steel radial cord tire. Speed rating: Indicates the maximum speed at which the tire can carry a specified load under defined conditions. Letters A to Z represent certified speed ratings from 4.8km/h to 300km/h. Common speed ratings include: Q: 160km/h; H: 210km/h; V: 240km/h; W: 270km/h; Y: 300km/h; Rim specification: Indicates the rim size compatible with the tire for practical use, such as 'Standard Rim 5.00F'.

19

2

Share

Where is the engine speed sensor located on the Volkswagen CC?

The engine speed sensor on the Volkswagen CC is generally installed on the blade flywheel. Introduction to the speed sensor: The speed sensor on the engine is a Hall sensor, which operates based on the signal teeth on the flywheel. It converts magnetic signals into electrical signals through semiconductor components. This type of sensor can function without direct contact with the measured object. Principle of the speed sensor: The vehicle speed sensor on the transmission can directly convert mechanical signals into electrical signals. The sensor meshes with the main reduction gear of the transmission via a gear. The rotation of the main reduction gear drives the rotation of the sensor gear, thereby outputting the speed signal.

7

3

Share

How to Replace the Focus Air Conditioning Filter?

Method for replacing the Focus air conditioning filter: 1. Pinch the two yellow clips and twist them downward; when reinstalling, simply press them back into place. 2. Remove the air conditioning filter cover; when reinstalling, align it and push it back into position. 3. Pull out the old air conditioning filter. The installation angle of the filter is quite tricky, but there's no need to worry too much about the filter deforming during removal or installation—it will naturally expand into place without affecting performance. Functions of the air conditioning filter: 1. Ensures the filter fits tightly against the housing, preventing unfiltered air from entering the cabin. 2. Separates solid impurities such as dust, pollen, and abrasive particles from the air. 3. Adsorbs moisture, soot, ozone, odors, carbon oxides, SO2, CO2, etc., from the air, with strong and lasting moisture absorption. 4. Prevents car windows from fogging up, ensuring clear visibility and safe driving; provides fresh air to the cabin, preventing occupants from inhaling harmful gases and ensuring driving safety; effectively sterilizes and deodorizes. 5. Maintains clean cabin air, preventing bacterial growth and creating a healthy environment; effectively separates solid impurities such as dust, filter powder, and abrasive particles from the air; effectively blocks pollen, ensuring occupants do not experience allergic reactions that could compromise driving safety.

2

5

Share

How to Adjust the Dashboard of the New Nissan Qashqai?

Is It Embarrassing for Lynk & Co to Use 95 Octane Gasoline?

What Causes Unstable Idle Speed When the Engine is Cold?

Is Cadillac a domestically produced model?

What is the tire model for the Bluebird?

Where is the engine speed sensor located on the Volkswagen CC?

How to Replace the Focus Air Conditioning Filter?

What colors are available for the Audi Q8?

Is 'ON' for start or 'OFF' for start?

How many seats does the Porsche 718 sports car have?

How is car fuel consumption calculated?